KidKraft 26913A User manual

A. Hex Screw
x 32 pcs
(50 mm, 2 in)
B. Cam Bolt
x 4 pcs
(36 mm, 1 3/8 in)
C. Cam Lock
x 4 pcs
Allen Wrench
x 1 pc
Bin
Assembly Instructions
NOTE: Once the two pieces of the plastic bin are connected, mechanism is permanent.
Do not attempt to separate the two pieces once assembled.
Patent Pending
Step 1
Place Bottom through Top.
Top
Bottom
Pink
*Repeat for lavender bins.
PARTS LIST:HARDWARE
R
The following tool
is required for
assembly:
Phillips Screwdriver
Step 2
Step 3
Pull up Top with one hand and push down Bottom at the
same time until the two parts lock. Make sure that the
six “U” hooks have been securely locked.
10 Lavender
11
x 2 x 2
12
3
4
5
6
7
8x 10
9
x 2
x 2
x 2
x 2
x 2
Heart Table and Chair Set
Parts List
Customer Service
1-800-933-0771
www.kidkraft.com 1
E. Cross Dowel
Nut x 4 pcs
D. Cross Dowel
Bolt x 4 pcs
(58 mm, 2 1/4 in)
Bottom
Top
USE AND MAINTENANCE:
-Use on level surfaces only
-Please check assembly at regular intervals, and
frequently tighten hardware if necessary. If
maintenance is not carried out, the product could
cease to function properly.
WARNING:
CHOKING HAZARD. Small parts and sharp points, not suitable
for children under 3 years.
CAUTION:
ADULTASSEMBLYREQUIRED. Hardware contains
small screws with sharp points. Keep unassembled
parts out of the reach of small children.
Item #26913A
Please retain this information for future reference
© 2010 KidKraft, LP To order replacement parts, please visit www.kidkraft.com

A
A
D
D
A
A
Step 1
Step 5 Step 6 Step 7 Step 8
Step 2 Step 3 Step 4
A
A
A x 10
A x 10
CC
CC
BB
BB
12
3
4
56
8
9
77
*Repeat steps 1 and 2
for second chair
*Insert bins under table.
10
11
x 10
x 2
x 2
Item # 26913A
Heart Table and Chair Set
Parts List Please retain this information for future reference
Customer Service
1-800-933-0771
www.kidkraft.com 2
E
E