KIMBALL MIDWEST 82-223 Instruction Manual

Operating Instructions Manual
Stud Remover & Installation Sets
SAE: 82-222
Metric: 82-223
Read through this Operating Instructions Manual carefully before using the
product. Protect yourself and others by observing all safety information,
warnings, and cautions. Failure to comply with instructions could result in
personal injury and/or damage to product or property. Please retain
instructions for future reference.

1
Stud Installation Instructions:
1) Screw the stud into the installation tool until it bottoms out onto the steel
ball.
2) Tighten the grub screw using the included hex key while holding the
installation tool with a wrench.
3) Thread the stud into the threaded hole by hand.
4) Tighten the stud using a wrench on the installation tool.
5) Remove the installation tool by loosening the grub screw and unscrewing
the tool.
Stud Removal Instructions:
1) Screw both parts A & B onto the stud and lock them together two
wrenches by screwing them into each other.
2) Remove the stud by using a wrench on piece A.
3) To remove the tool from the stud, simply loosen both pieces by unscrewing
them with two wrenches.

2
A
B

3
SAFETY PRECAUTIONS:
Read the owner’s manual before use. Wear safety glasses when using this tool.
WARNING: Cancer and Reproductive Harm –
www.p65warnings.ca.gov.
LIMITED WARRANTY:
Kimball Midwest warrants to the original buyer ("Buyer") all parts and accessories
purchased by it from Kimball Midwest against defects in material or workmanship.
Kimball Midwest will repair or replace, at no charge to the buyer, this tool which,
after examination by Kimball Midwest, is determined to be defective within a
period of 1 year from receipt.
Coverage under this warranty will be provided only if the defective tool has been
submitted to Kimball Midwest for inspection.
This warranty does not cover any damage to this tool due to alteration,
modification, improper installation, accident, post-installation misuse, abuse,
negligence, inadequate maintenance, or malfunction of associated parts or
equipment not supplied by Kimball Midwest.
This warranty is in lieu of any other warranty, expressed or implied, including any
warranty of merchantability or fitness for a particular purpose. Replacement or
repair as provided under this warranty is the exclusive remedy of the buyer. Kimball
Midwest shall not be liable for any incidental or consequential damages resulting
from breach of this warranty. Kimball Midwest neither assumes, nor authorizes any
person to assume for it, any other liability in connection with the sale of its products.
If this Kimball Midwest Product proves defective in material or workmanship within
one year after purchase, contact the Kimball Midwest Quality Assurance
Department at [e-mail]

4
Manufactured For:
Kimball Midwest
4800 Roberts Road
Columbus, OH 43228
1-800-233-1294
www.kimballmidwest.com