King Quest VQ4100-OE User manual

VQ4100-OE Quick Reference Guide
KING Quest with Power Injector
QUESTTM
This Quick Reference Guide will have you
watching TV in minutes!
For additional information regarding the
KING Quest, see your Owner’s Manual.
Simply better, by design.™
OPERATING NOTES:
The antenna unit begins scanning when you connect the power injector to
the receiver. PLEASE BE PATIENT! The antenna unit may lock on the
satellite in as little as 2 minutes, but may occasionally take up to
10-15 minutes.
If you wish to start a new scan (for example, you move the vehicle and lose
reception): press the power injector’s RESET button. This is the preferred
method to start a new scan, but there are two alternate methods as well:
• Disconnect and reconnect the coax from the antenna unit to the power
injector.
• Press the RESET button on the receiver (works for select receivers only,
such as models D12, H24, and HR24).
The KING Quest will not lock on the 119 satellite, so you will not receive
your local channels if they are broadcast from the 119. If you wish to receive
programming from the 119 as well as the 101, you can replace the power
injector with the KING UC1000 Controller (sold separately - see your dealer or
our website www.kingconnect.com for details.)
DIRECTV is a registered trademark of DIRECTV L.L.C.
KING is a registered trademark of Electronic Controlled Systems, Inc.
KING Quest and Simply better, by design. are trademarks of Electronic Controlled Systems, Inc.
©2015 KING
22123 Rev A
Any tall objects can
block signal from
reaching the antenna!

When all connections are made, the antenna unit
will scan for the DIRECTV 101 satellite.
DO NOT MOVE THE ANTENNA UNIT
WHILE IT IS SCANNING.
Please be patient! When the satellite is found,
your programming will appear. Enjoy!
Please read additional operating notes on back.