GENERAL SAFETY INSTRUCTIONS
■
Read these instruction for use carefully before using the appliance and save them
for future reference.
■
Check if the voltage indicated on the appliance corresponds to the local mains
voltage before you connect the appliance.
■
Do not use the appliance if the mains cord .the plug or other parts are damaged .
■
If the mains cord is damaged , it must be replaced by designate service centre or
similarly qualified persons in order to avoid a hazard.
■
Always unplug the appliance from the mains before assembling, disassembling or
making adjustments to any of the accessories .
■
Never immerse the motor unit in water or any other liquid , nor rinse it under the
tap. Only use a moist cloth to clean the motor unit.
■
Never let the appliance run unattended .
■
Keep the appliance out of the reach of children.
■
Do not allow children to use the appliance without supervision.
■
This appliance is intended for household use only .
■
Avoid touching the blades, especially when the appliance is plugged in. the blades
are very sharp!
■
If the blades get stuck, unplug the appliance before removing the ingredients that
are blocking the blades .
Before first use
Thoroughly clean the parts that will come into contact with food before using the
appliance for the first time
A)
Switch speed I
B)
Switch speeds II
C)
Motor unit
D)
Blender bar
Using the appliance
The hand blender is intended for :
■
Blending fluids, e.g. dairy products, sauces, fruit juices, soups, mixed
drinks and shakes .
■
Mixing soft ingredients, e.g. pancake batter or mayonnaise.
■
Pureeing cooked ingredients, e.g. for making baby food.
1.
Attach the blender bar to the motor unit ( fig 1)
2.
Immerse the blade guard completely in the ingredinents ( fig.2)
3.
Switch the appliance on by pressing the normal or turbo speed button.
4.
Blend the ingredients by moving the appliance slowly up and down and in circles
