1. 3D tactile design for ease of identification and handling
2. USB C connector which is both reversable and compatible
with other USB C devices
3. High contrast design, strengthened, woven cable
General Safety
Do not allow this product to be exposed to liquids, steam or
sand.
Do not leave where excessive heat can occur such as in a vehicle,
in direct sunlight, on top of a heater or other heat sources.
Do not attempt to open or dismantle any part of this product.
There are no user-serviceable parts inside.
If any faults are discovered do not operate, disconnect from the
mains and contact your point of purchase.
EU and BS Declaration of Conformity
This product has been designed, tested and certified to meet the
following standards:
Radio Equipment Directive 2014/53/EU
ETSI EN 300 328 v2.1.1(2016-11)
Draft ETSI EN 301 489-1 V2.2.0(2017-03)
Draft ETSI EN 301 489-1 V3.2.0(2017-03)
EN 62479: 2010
EN 60065:2014
EMC Directive - 2014/30/EU
EN 55032:2015