KingShield LEDP6640CW Manual

INSTALLATION / OPERATING
INSTRUCTIONS FOR
LED CEILING PANEL
MODEL NUMBER: LEDP6640CW
Pl as r ad th s instructions fully
b for att mpting installation.
IF IN DOUBT, INSTALLATION SHOULD
BE MADE BY A QUALIFIED
ELECTRICIAN IN ACCORDANCE WITH
CURRENT WIRING REGULATIONS.
• Typical applications commercial
buildings, schools, hospitals, offices etc.
ADVANTAGES
• Ener y savin up to 50%
• Even li htin output
• Instant start, no flickin , no hummin
• Unique circuit desi n, each roup of
LEDs work separately, avoidin any
problems with li ht output caused or
influenced by sin le faulty LED
• No RF interference
• Super slim only 12mm thick
1. Remove a suita le 600 x600mm
ceiling panel or an existing panel
light fitting.
2. Ensure the mains has een made
safe.
3. Connect the LED driver to the
230V AC mains supply, ensuring
Brown/Red goes to Live and
Blue/Black goes to neutral.
4. Connect driver output to LED panel
with the supplied connectors.
5. Position the LED panel into the
ceiling using existing frame.
6. Re connect supply and turn on to
check illumination.
These instructions should be read carefully
prior to any installation and retained after
completion for further reference and
maintenance.
Please give these instructions to the building
owner/occupier after installation.
IMPORTANT
This unit should be installed to current
IEE wirin re ulations, if in doubt please
consult a qualified electrician.
SAFETY INFORMATION
NOTICE FOR USER
1. Do not disassem le the product.
2. Electricity supply should e turned
off when checking, replacing and
installing the panel.
3. Do not use water to clean the panel.
4. This product should only e used for
indoor lighting.
INSTALLATION INSTRUCTIONS
LEDP6640CW Ins ruc ions:LED Ceiling Panel 8/7/13 09:46 Page 1

GUARANTEE
Your KingShield LED Ceiling Panel Light Fitting
is guaranteed for 12 months from the date of
purchase. Please retain receipt as proof of purchase.
Issue no: 703324
PLEASE KEEP THESE INSTRUCTIONS
SAFE FOR FUTURE REFERENCE
WEST ROAD . HARLOW
ESSEX . CM20 2BG . UK
sales@green rook.co.uk
W W W. G R E E N B R O O K . C O . U K
TECHNICAL DATA
Input Voltage: 90 -265V AC 50/60Hz
Total Power: 40W
Lumens output: 85 lm/W
Working Temp: -20 - +45oC
LED Type: 3014
Weight: 6.5kg
LED Qty: 200pcs
Dimensions: 600 x600 x12mm
IP Rating: IP20
Colour Temp: Daylight, 6000K
Brown AC L
Blue AC N
Blk+
Blk+
Blk/Wht Blk/Wht
WIRING DIAGRAM
LED Panel Light
OUTPUT
34V DC
INPUT 90 - 265V AC 50/60Hz
LEDP6640CW Ins ruc ions:LED Ceiling Panel 8/7/13 09:46 Page 2