Kingsun ARTEMIS Series User manual

221
253
315
377
439
501
563
625
687
749
330
330
330
330
330
330
330
330
330
330
267
267
267
267
267
267
267
267
267
267
ARTEMIS
W
H
1Drill 2 holes in the ceiling with electrical drill. Spacing as shown in
picture 1.
The length of M10 expansion screw and the depth of the hole
should be 60mm or more than 60 mm.
2Tap the M10 screws into the holes as the sketch shows.
3Lock arm bracket onto the wall with plain washer, spring washer
and M10 nut.
Pass the power wire through the hole of arm bracket. Hang the lamp
onto the bracket with the alignment of hole location between lamp
clasp and arm bracket. Then lock the lamp onto the bracket with two
M4 screws.
4
TL2R3001
TL2R3010
TL2R3002
TL2R3003
TL2R3004
TL2R3005
TL2R3006
TL2R3007
TL2R3008
TL2R3009
L
2-Ø10mm 160mm
Installation Instruction
Mounting height≥8m, the maximum projection area of undergoing wind:
L(m) x W(m) x 0.5
unit: mm
Plain Washer
Spring Washer
M10 Nut
Cement Ceiling
M4 Screw
Product name L W H Model No.
Product Dimension
Note：The product pictures in the manual take TL2R3004 Artemis series tunnel light for example.
ARTEMIS series tunnel light installation instruction
Luminaire can not be directly installed on the surface of ordinary flammable material in any circumstance.
Warning: If outer flexible cable or cord of luminaire are damaged, only manufacturer, its agent or eligible people
can replace them to avoid accident.

5Connect the power wire with retention wire , then make insulation and water-proof processing. Please look at detail A/B at the wiring place.
(please connect wires as per appropriate color of power cords as shown in A/B diagram. )
Please connect the same color or same
polar wires together.
Brown“L”
Black“L”
White “N”
Please look at detail A/B on
the wiring place.
Green “ ”
Retention wire
Retention wire
Please connect the same color or same
polar wires together.
Blue“N”
A Diagram
B Diagram
Yellow green" "
6Loosen M6 screws with spanner to adjust lamp body until the beam angle meet with customer's requirement, then lock the screws with
spanner.
TL2R3001TL2R3002TL2R3003TL2R3004TL2R3005
50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz
120V-277V~ 120V-277V~ 120V-277V~ 120V-277V~ 120V-277V~
50/60Hz 50/60Hz 50/60Hz 50/60Hz 50/60Hz
120V-277V~ 120V-277V~ 120V-277V~ 120V-277V~ 120V-277V~
TL2R3006TL2R3007TL2R3008TL2R3009TL2R3010
Technical Parameters
M6 Screw
3306-TL2R-0049 (A)
www.kingsunlights.com
www.ksleds.com
E-mail: [email protected]
Global Customer Service line: 400 880 0816
Statement: The details in this book have been checked carefully, Kingsun reserves the right of explication for any errors caused by printing and translation. Specifications are subject to change without notice Kingsun Optoelctronics Co., Ltd All rights reserved
Product Specification
Input Voltage
Power Supply Frequency
Power Rating
Product Specification
Input Voltage
Power Supply Frequency
Power Rating