Kirisun WiFi RoIP System User manual

User Manual

WiFi RoIP System
1
WiFi RoIP System
Thank you for choosing Kirisun WiFi RoIP System. We believe that the product will
bring much convenience to your work and life, and we hope you are satisfied with the
quality and functions of the product.

User Manual
2
Notice
◆Please read the manual carefully before using the product. We consider that you have acquainted
with the manual when you start to use the product.
◆Please keep the manual well for further reference.
◆To prevent infringement to your legal rights, please fill in the Warranty Card carefully and faithfully
and acquire a purchase voucher when you buy the product.
◆The intellectual property of all parts of the product, including accessories, is owned by Kirisun and
its authorized subjects. Without permission of Kirisun and such subjects, no copy, extraction or
translation of such parts is allowed.
◆The product is subject to change because of upgrading or improvement. Kirisun reserves the right
to change the specifications of software and hardware mentioned in the manual from time to time
without prior notification. The specifications and information in the manual is only for your reference.
◆Despite of careful verification, the manual might contain mistakes. Kirisun reserves the right of final
interpretation of the manual.

WiFi RoIP System
3
Safety Precaution
◆Make sure the mains voltage complies with the rated input voltage of the System. Avoid overloading
a power socket or power cord. Check wiring regularly, and replace a wire immediately if it is broken.
◆To prevent the device from getting too hot, do not block its ventilation holes, and ensure enough
space for heat dissipation.
◆Keep the device away from heat, high temperatures, moisture and damp. Do not put heavy articles
on the device.
◆If the device will not be used for long or before cleaning, please power it off and disconnect the
power cord. Note that the temperature of the device surface might be high. Wipe the outside of the
device using a soft dry cloth.
◆Power on the device at least 15 seconds after it is powered off last.

User Manual
4
Appearance
①Power On/Off
②LED Indicator
③USB Ports
④LAN Port
⑤HD Interface
⑥VGA Interface
⑦DC/IN Port

WiFi RoIP System
5
CONTENTS
1 Unpacking................................................................................................................................................. 5
2 Powering On/Off...................................................................................................................................... 6
3 Basic Operation........................................................................................................................................7
4 Software Operation..................................................................................................................................8
5 IP Resetting.............................................................................................................................................. 9
6 Troubleshooting....................................................................................................................................... 9

User Manual
6
1Unpacking
Open the packing box carefully and find the parts as listed below. If any item is missing or
damaged, please contact the dealer.
1.1 Attachments
Item
Quantity
WiFi RoIP System
1
Power Adapter
1
AC Power Cord
(Euro/US/Aus/UK standard)
4
User Manual
1
2Powering On/Off
2.1 Powering On

WiFi RoIP System
7
◆Plug the power adapter into a compliant AC power socket.
◆Connect the power connect to the AC power cord.
◆Connect the AC power cord to the DC/IN port.
◆Press the Power On/Off key. When blue indicator light is on, the device is powered on
successfully. The startup takes about 1 minute.
2.2 Powering Off
◆Press and hold the Power On/Off key. When indicator light is off, the device is powered off
successfully.
3Basic Operation
3.1 Initial Setting
◆Power on the device. Connect the LAN port of the device to a PC using a network cable.

User Manual
8
◆The default device IP is 192.168.10.2. Set the PC IP to 192.168.10.* so that it is in the same
network segment of the device IP.
◆Run a web browser on the PC, and go to 192.168.10.2. In the login interface, enter the initial
account and password, and then click Login.
◆Go to the Setting interface, and modify the device IP to another available IP (hereinafter “the new
IP”) under the existing LAN.
◆After modifying the device IP, connect the device to the router using a network cable.
◆Now you can access the new IP on a PC connected to the LAN.
3.2 Connecting to a Two-Way Radio
◆Connect a two-way radio to a Wi-Fi network of the router. Make sure the new IP of the device can
be accessed via a terminal with an IP assigned under the Wi-Fi network.
◆Keep the device on. After a while, the radio will be connected automatically to the system of the
device.