KISANKRAFT KK-FMC-500 User manual

KisanKraft®
Warranty Certificate
(KISANKRAFT COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (Formerly known as KisanKraft Machine Tools P Ltd.)
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 12 of 12
Important: (1) Normal maintenance and adjustments to the product is the
responsibility of thecustomer. (2) Normal wear and tear is notcoveredunder warranty.
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the
warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be
liable for general damages, including bodily injuries, or for incidental or consequential
damages including, but not limited to, loss of use, loss of profits, loss of production,
expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranty hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter the
obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended
to the first end user (original purchaser), and no warranty is made, nor authorized to
be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of
any obligation under this warranty for failure during the applicable warranty period,
deliver the defective product, to the nearest Authorized Dealer. KisanKraft Limited, its
manufacturers and its dealers reserve the right to inspect the claimed defective part(s)
to determine if the malfunction isthe result of a defect covered by this warranty. Please
note that the decision of KisanKraft Limited with respect to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters 
Engines and Water PumpsHand ToolsGardenTools 
Cultivators and Accessories Sprayers and Accessories
Transplanter and Post Hole Digger Milking Machines 
KisanKraft®
Warranty Certificate
(DEALER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (Formerly known as KisanKraft Machine Tools P Ltd.)
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 1 of 12
Product
Chaff Cutter
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-FMC-500
WARRANTY
PERIOD
6MONTHS
FOR THE SPECIFIED PERIOD FROM THE DATE
OF SALE OR DELIVERY WHICHEVER IS
EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone, etc.):
Dealer’s Stamp (Address, Phone, TIN,
etc.):
Buyer’s Sign
Dealer’s Sign
What is covered: KisanKraft Limited and its manufacturers warrant this product to be
free from defects in material or workmanship. All parts defective in material and
workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its
manufacturers at the premises of Authorized Dealers, of such parts as appear to
KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to trade
accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor its authorized dealers assumes any
responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of machine
or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical damage,
(6) Repairs made by unauthorized parties and/or with unauthorized parts, (7) Improper
set up, adjustments, tampering or altered products
Note: The purchase is not contingent upon a product demonstration. The purchaser
shall satisfy himself with the product, including any product demonstration or
verification of any function, before buying. KisanKraft Limited or its authorized
dealers, including online sellers, shall not be liable to give any on-site demonstration
after purchase of any of the product.

KisanKraft®
Warranty Certificate
(DEALER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (Formerly known as KisanKraft Machine Tools P Ltd.)
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 2 of 12
Important: (1) Normal maintenance and adjustments to the product is the responsibility
of the customer. (2) Normal wear and tear is not covered under warranty
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell, spark-
plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under the warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not be
liable for general damages, including bodily injuries, or for incidental or consequential
damages including, but not limited to, loss of use, loss of profits, loss of production,
expense of substitute equipment or other commercial loss or damage.
Limitation of Liability: This limited warranty is in lieu of all other express warranties,
obligations, or liabilities. Any implied warranties, obligations or liabilities, including, but
not limited to, any implied warranty of merchantability shall be limited in duration to the
applicable warranty period. Any action for breach of any warranties hereunder,
including, but not limited to, any implied warranty of merchantability must be brought
within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter the
obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall not
transfer if the product is resold by the first buyer. The above warranties are extended to
the first end user (original purchaser), and no warranty is made, nor authorized to be
made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance of any
obligation under this warranty for failure during the applicable warranty period, deliver
the defective product, to the nearest Authorized Dealer. KisanKraft Limited, its
manufacturers and its dealers reserve the right to inspect the claimed defective part(s)
to determine if the malfunction is the result of a defect covered by this warranty. Please
note that the decision of KisanKraft Limited with respect to any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGardenTools 
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines 
KisanKraft®
Warranty Certificate
(KISANKRAFT COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (Formerly known as KisanKraft Machine Tools P Ltd.)
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 11 of 12
Product
Chaff Cutter
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-FMC-500
WARRANTY
PERIOD
6MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERY WHICHEVER IS
EARLIER.
Dealer’s
Invoice Date
Dealer’s
Invoice No.
Buyer’s Info (Name, Address, Phone,
etc.):
Dealer’s Stamp (Address, Phone, TIN,
etc.):
Buyer’s Sign
Dealer’s Sign
What is covered: KisanKraft Limited and its manufacturers warrant this product to be
free from defects in material or workmanship. All parts defective in material and
workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its
manufacturers at the premises of Authorized Dealers, of such parts as appear to
KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to trade
accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor its authorized dealers assumes any
responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of
machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical
damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7)
Improper set up, adjustments, tampering or altered products
Note: The purchase is not contingent upon a product demonstration. The
purchaser shall satisfy himself with the product, including any product
demonstration or verification of any function, before buying. KisanKraft Limited or
its authorized dealers, including online sellers, shall not be liable to give any on-
site demonstration after purchase of any of the product.

KisanKraft®
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 10 of 12
Wide Range of Products for Every Need
For more information give MISSED CALL: 07676065555
Many of our products have BIS: ISI certification.
KisanKraft®
CHAFF CUTTER
KK-FMC-500
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 3 of 12
User Manual
KisanKraft Limited
(Formerly known as KisanKraft Machine Tools Pvt. Ltd.)
Sri Huchhanna Tower, #4,1st Main,7-A Cross, Maruthi Layout, Dasarahalli,
HAF Post, Hebbal, Bangalore 560024,Karnataka,INDIA
♦Bangalore (HO) ♦ Ahmedabad ♦ Bhopal ♦ Bhubaneswar ♦ Coimbatore ♦
♦Guwahati ♦ Patna ♦ Hubli ♦ Hyderabad ♦ Jaipur ♦
♦Karnal ♦ Kolkata ♦ Lucknow ♦ Jammu ♦ Pune ♦ Raipur ♦ Shimla ♦

KisanKraft®
CHAFF CUTTER
KK-FMC-500
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 4 of 12
CONTENTS
Before Getting Started........................................................................7
Safety Precautions ..............................................................................7
Product Characteristics & Main Components.....................................7
Working Principle................................................................................7
Technical Specifications......................................................................7
Installation and Commissioning..........................................................8
Operational Method ...........................................................................8
Maintenance.......................................................................................8
Troubleshooting..................................................................................8
KisanKraft®
PRODUCT RANGE
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 9 of 12
KisanKraft has a large range of products to serve the farmers. A list of our products
is given below:
Brush Cutters and Accessories
Brush Cutter/Power Weeder
Backpack Brush Cutter
Tea Pruner
Pole pruner with Engine
Reaper Attachment
Blades-Circular
Blades (2 &3 points)
Baffle
Nylon Rope
Tap & Go
Chainsaws
Petrol Chainsaw
Electric Chainsaw
Chain Sharpening Machine
Engines and Water Pumps
Engine –Diesel-(Horizontal)
Engine –Diesel(Vertical)
Engine-Kerosene
Water Pump with Petrol Engine
Water Pump with Kerosene Engine
Water Pump with Diesel Engine
Hand Tools
Secateurs
Folding Saw
Garden Rake
Garden Shovel
Hedge Shear
Lopper
Telescopic Hedge Shear
Telescopic Lopping Shear
Tree Pruner
Telescopic Steel Pipe & Fruit Picker Bag
Sheep Shear
Garden Tools
Electric Pressure Washer
Hedge Trimmer
Lawn Mower (Electric, Petrol & Manual)
Leaf Blower
Cultivators and Accessories
Petrol and Diesel
Sprayers and Accessories
BatterySprayer
Portable Power Sprayer
Trolley Sprayer
Manual Knapsack Sprayer
Manual Pressure Sprayer
Rose Cans
Hose Crimping Machine
HTP Sprayer
HTP Delivery Hose
HTP Hose Reel
HTP Stand
HTP Gun / Lance(Brass Rod
Knapsack Power Sprayer
Mister / Duster / GranuelSpreader
HTP Sprayer Set with Diesel Engine
HTP Sprayer Set with Kerosene Engine
Fogging Machine
Milking Machine
Wood Shredder
Fodder Ensiling Chaff Cutter
Fodder Grinder Chaff Cutter
Fodder Mini Chaff Cutter
Harvester
Maize Sheller
Maize Sheller + Dehusker
Maize Combine Harvester
Onion Digger Carlotti Italy
Tea Leaf Harvester
Sugarcane Combine Harvester
Sugarcane Leaf Stripper
Transplanter and Post Hole Digger
Paddy Transplanter (2 & 8 Rows)
Transplanter-Vegetable & Tobacco
Post Hole Digger(4” to 14”Augers)

KisanKraft®
CHAFF CUTTER
KK-FMC-500
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 8 of 12
Installation and Commissioning
1. Before the machine leaves the factory, the enterprise has been installed and serviced, and
the user does not need to service again. Just install the body and motor on the rack.
2. Fasten the mower and motor to the rack in the reserved position.
3. Then hang the belt, adjust the tightness, tighten the motor, and then jog the motor switch.
Confirm that the direction of rotation of the spindle matches the direction marked by the
mower. Operational Method
1. The test operation can be put into production and use after confirming that it is normal.
2. The bracket and the motor should be installed according to the instruction manual. The
outer end surface of the mower and the motor wheel must be on a flat surface. The elastic
adjustment of the belt should be appropriate and should not be too loose or too tight.
3. Install the feeding hopper, check whether the fastening screws of each part are loose,
cover the machine cover, tighten the pressure cover bolt, and use the manual pulley to
see if it is flexible to rotate, and there is no friction or collision.
4. After the installation is completed, add a small amount of lubricant to the gears. then we
can make idling test. Pay attention to whether the steering is correct. No mistake, then
normal operation.
5. Regularly check the fastening bolts of each part, especially if the moving knife, fixed knife
and fastening bolt are loose. Timing gears, filling the right amount of lubricant (usually add
lubricant once in every 2-3 hours)
Maintenance
1. Always check the fasteners of each component to prevent loosening.
2. After 1000 working hours, all the bearing parts should be cleaned and filled with the
calcium-based grease.
3. When stopping the work, the machine should be idling for a period of time, and the residual
material dust in the machine should be blown off. After stopping, the Sundries inside and
outside of the machine should be cleared. Wipe the machine clean and store it in a dry
warehouse.
4. Both the mobile knife and bottom knife can be adjusted. If sharpening is required, the blade
must be straightened, the moving knife and the fixed knife and the cutting edge are 0.3mm.
When replacing moving & fixed knife fasteners, don’t replace them with ordinary fasteners.
5. Not following the requirements may lead to accidents and other consequences.
Troubleshooting
Problem
Probable Cause
Remedy
Overload
shutdown
Feeding material is more
Reduce the amount of feed
Low productivity
1. Spindle speed is too low.
2. The moving knife and the
fixed knife wear.
1. Adjusting the tightness of the
rotational belt
2. Replace
Bearing
temperature rise
1. The feed is too large
2. Bearing lack of oil
1．Reduce feed quantity
2. Filling lubricant
Abnormal
vibration and
noise
1. Loose fasteners
2. The frame is unstable
3. Rotor imbalance
1. Fastening bolts, etc.
2. Leveling frame
3. Remove the rotor and rebalance
KisanKraft®
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (Formerly known as KisanKraft Machine Tools P Ltd.)
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 5 of 12
Product
Chaff Cutter
KisanKraft
Invoice Date
Brand
KisanKraft
KisanKraft
Invoice No.
Model
KK-FMC-500
WARRANTY
PERIOD
6MONTHS
FOR THE SPECIFIED PERIOD FROM THE
DATE OF SALE OR DELIVERYWHICHEVER IS
EARLIER.
Dealer’s
Invoice Date
Dealer’s Invoice
No.
Buyer’s Info (Name, Address, Phone,
etc.):
Dealer’s Stamp (Address, Phone, TIN,
etc.):
Buyer’s
Sign
Dealer’s Sign
What is covered: KisanKraft Limited and its manufacturers warrant this product to be
free from defects in material or workmanship. All parts defective in material and
workmanship are covered.
This warranty will only cover defects arising under normal usage.
This warranty is limited to repair or replacement by KisanKraft Limited or its
manufacturers at the premises of Authorized Dealers, of such parts as appear to
KisanKraft or its manufacturers, upon inspection, to be defective in material and/or
workmanship. KisanKraft or its manufacturers make no warranty with respect to trade
accessories not manufactured or sold by them.
What is not covered: The warranty shall become null and void and neither KisanKraft
Limited nor any of its manufacturers, nor its authorized dealers assumes any
responsibility, if the failure was caused by the following:
(1) Operation of product with incorrect fuel or lubricants, (2) Incorrect usage of
machine or misuse, (3) Lack of maintenance, (4) Negligence, (5) Accident or physical
damage, (6) Repairs made by unauthorized parties and/or with unauthorized parts, (7)
Improper set up, adjustments, tampering or altered products.
Note: The purchase is not contingent upon a product demonstration. The
purchaser shall satisfy himself with the product, including any product
demonstration or verification of any function, before buying. KisanKraft Limited or
its authorized dealers, including online sellers, shall not be liable to give any on-
site demonstration after purchase of any of the product.

KisanKraft®
Warranty Certificate
(CUSTOMER COPY)
This warranty is null & void, if you fail to register the warranty with
KisanKraft by sending the KisanKraft Copy with dealer’s stamp.
KisanKraft Limited (Formerly known as KisanKraft Machine Tools P Ltd.)
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 6 of 12
Important: (1) Normal maintenance and adjustments to the product is the
responsibility of the customer. (2) Normal wear and tear is not covered under
warranty.
(3) Rubber/plastic parts and consumables such as blades, clutch and clutch-bell,
spark-plugs, nylon line, air-filters, fuel-filters, oil seals etc. are not covered under
the warranty.
No Warranty On Electrical Motor / Electrical Parts / Battery Etc.
Incidental / Consequential Loss: KisanKraft Limited or its manufacturers will not
be liable for general damages, including bodily injuries, or for incidental or
consequential damages including, but not limited to, loss of use, loss of profits,
loss of production, expense of substitute equipment or other commercial loss or
damage.
Limitation of Liability: This limited warranty is in lieu of all other express
warranties, obligations, or liabilities. Any implied warranties, obligations or
liabilities, including, but not limited to, any implied warranty of merchantability shall
be limited in duration to the applicable warranty period. Any action for breach of
any warranty hereunder, including, but not limited to, any implied warranty of
merchantability must be brought within the applicable warranty period.
Modifications of Warranty: No agent, representative, dealer, or employee of
KisanKraft Limited or any of its manufacturers has the authority to increase or alter
the obligations of this warranty.
Assignment / Transfer of warranty: The warranty cannot be assigned and shall
not transfer if the product is resold by the first buyer. The above warranties are
extended to the first end user (original purchaser), and no warranty is made, nor
authorized to be made assignable on resale by the first end user.
What you must do to obtain limited warranty service: To obtain performance
of any obligation under this warranty for failure during the applicable warranty
period, deliver the defective product, to the nearest Authorized Dealer. KisanKraft
Limited, its manufacturers and its dealers reserve the right to inspect the claimed
defective part(s) to determine if the malfunction is the result of a defect covered by
this warranty. Please note that the decision of KisanKraft Limited with respect to
any warranty claim is final.
Receipt is required for availing warranty services
Jurisdiction: All disputes are subject to Bangalore court’s jurisdiction.
Our
Products
ChainsawsBrush Cutters and AccessoriesHarvesters
Engines and Water PumpsHand ToolsGardenTools 
Cultivators and AccessoriesSprayers and Accessories
Transplanter and Post Hole Digger Milking Machines 
KisanKraft®
CHAFF CUTTER
KK-FMC-500
: www.kisankraft.com
: [e-mail]
Missedcall:7676065555
Page 7 of 12
Before Getting Started
Please read this instruction manual carefully before use.
This instruction manual is used to explain the technical performance, use method, connection
and installation, common faults in operation of the machine. It guides users to proper operation,
use, repair and maintenance. Proper use of the machine can extend its service life and reduce
the failure rate. Safety Precautions
1. The product manual must be read carefully before using the machine. And adjust and
maintain according to the regulations.
2. Before starting, check the following
a) Whether the key parts are solid?
b) Is the cutter wheel steering consistent with the specified direction?
c) Is the upper casing locked?
d) Is the Safety shield closed?
3. Do not open the safety shield when the machine is running.
4. If abnormal conditions are found, it is necessary to stop the inspection immediately. It is
strictly forbidden to rectify the fault when the machine is running.
5. When the feed port is clogged, it is strictly forbidden to help feed with your hands or sticks.
6. It is forbidden to mix iron objects, stones and other debris into the materials.
7. Workplace should be well-ventilated and fire-proofed.
8. Reasonable matching power should be ensured, do not increase spindle speed arbitrarily.
9. The following people are not allowed to operate the machine:
Minors Drunken people and People with diseases that affect judgment,
10. Before normal operation, please run for 3 to 5 minutes, and there be no abnormality before
you can feed the material. When feeding, it should be evenly distributed and should not
be overloaded.
11. Note: “When feeding port is blocked, it is forbidden to feed with hand or stick." It is strictly
forbidden to mix iron and stone and other debris into the material" and "the safety shield
must be installed in place. When the machine is running, it is strictly forbidden to open the
safety cover.
12. Users who have not purchased safety protective devices shall, before putting the products
into use, configure their own safety protective devices in accordance with the standards.
Product Characteristics & Main Components
Our Chaff Cutter has characteristics like full steel plate structure, cast iron grass sticks and tool
holders, durable, can chop all kinds of forages like hay, corn Stover, etc. It is an economical
weeding equipment that is widely used at present. It has the advantages of small size, light
weight, simple installation, operation, maintenance, high production efficiency, etc. It is the best
choice among similar products.
Body, frame, grass roller, tool holder assembly, fixed blade, moving blade, feeding device, etc.
Working Principle
During work, The processed straw is straight into the cutting blade rotation mechanism under
the direct action of the grass roller for chopping, Using the centrifugal force generated by the
cutting roller in the rotary motion, the grass is pushed out 1-5 meters outside the casing.
Technical Specifications
Power
2.2kW(3 hp)
Max .Output (green)
500 Kg/H
Motor speed
2500 rpm
Max .Output (dry)
700 Kg/H