Kitchensource 88 5561 30 User manual

88 5561 30
Dining Table
Tools recommended for assembly : Level
Home Styles Consumer Assistance : www.homestyles-furniture.com,
[email protected], 888-680-7460, 877-831-0319
Hardware List
Part List
Tools required for assembly : Slotted screwdriver
This product is made from sturdy, high quality aluminum
and will provide years of enjoyment. Do not use power tools
to assemble and only tighten bolts until they are snug.
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damage occurring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure
a completed product as it was designed.
IMPORTANT NOTE
A.
Top
1 pc.
B.
Leg
4 pcs.
C.
Side Frame
4 pcs.
M8x40
Bolt
4 pcs. (+1 extra)
Spring Washer
12 pcs. (+1 extra)
Flat Washer
12 pcs. (+1 extra)
Key Wrench
1 pc.
Nut
12 pcs. (+1 extra)
Nut Cap
12 pcs. (+1 extra)
Cover
1 pc.

Assembly Instructions 2/2
IMPORTANT
* Please keep Key Wrench in a safe place as you may need to tighten up the Nuts in the future.
* Use a soft cloth between these parts and the floor.
* Do not use power tools to assembly and do not tightening the bolts and nuts.
* Do not tighten up all the bolts and nuts until each part is properly assembled.
* After assembly item must be level to work properly. Use the included adjustable levelers to level.
STEP 1
Attach Legs (B) to Side Frames (C) with
Flat Washers, Spring Washers, Nuts and
Nut Caps. (See Figure 1 and Figure 2)
Figure 1 Figure 2
B
B
B
B
C C
C
C
Nut Cap
Flat Washer
Spring Washer
Nut
STEP 3
Turn the unit over to its' upright position.
Cover the umbrella hole with Cover.
To level the unit, adjust the adjustable
levelers on the bottom of the legs.
(See Figure 4)
Figure 3
STEP 2
Place Top (A) upside down on a soft cloth.
Insert Bolts into the pre-drilled holes of Top (A).
(See Figure 3)
Attach unit to Top (A) with
Flat Washers, Spring Washers,
Nuts and Nut Caps.
Figure 4
Nut Cap
Flat Washer
Spring Washer
Nut
Cover
A
Bolt