Kitchensource HS-5601-80 User manual

Part List
IMPORTANT NOTE
Carefully remove all the parts from the carton and put
them individually on a soft cloth to prevent scratches
or other damages occuring to the parts.
We have taken great care in the design of this
product and request that you carefully and strictly
follow our assembly instructions to ensure a
completed product as it was designed.
Hardware List
Tools required for assembly : Phillips screwdriver
A.
Seat
1 pc.
D.
Back Frame
.1 pc
F.
Side Stretcher
1 pc.
E.
Side Stretcher
1 pc.
Home Styles Consumer Assistance Line 888-680-7460 and 877-831-0319
[email protected]
B.
Leg
1 pc.
C.
Leg
1 pc.
Side Chair
88 5 8601 0
M6x50
Head Cap Bolt
4 pcs.(+1 extra)
Spring Washer
9 pcs.(+1 extra)
Flat Washer
9 pcs.(+1 extra)
Hex Wrench
1 pc.
85M6x
Head Cap Bolt
(long)
4 pcs.(+1 extra)
M3.5x40
Wood Screw
4 pcs.(+1 extra)
M6x40
Head Cap Bolt
(short)
1 pc.(+1 extra)
Small
Hex Wrench
1 pc.

Assembly Instructions 2/2
STEP 1
Attach Legs (B) and (C) to Seat (A)
with Flat Washers, Spring Washers and
Head Cap Bolts. Tighten Head Cap Bolts
only half way. (see Figure 1)
Attach Side Stretcher (F) to Leg (C) and
Side Stretcher (E) to Leg (B) with Wood
Screws. (see Figure 2)
STEP 2
Attach the Back Frame (D) to the unit with Flat Washers, Spring Washers,
Head Cap Bolt (short), Head Cap Bolts (long) and Wood Screws.
(see Figures 3 and 4)
Tighten all Head Cap Bolts.
Flat Washer
Spring Washer
Head Cap Bolt
(short)
Wood Screw
D
Flat Washer
Spring Washer
Head Cap Bolt (long)
IMPORTANT
* Do not tighten up all the screws until each part is properly assembled.
* You should keep Hex Wrench in a safe place as you may need to tighten up the Head Cap Bolts in the future.
A
B
C
E
F
Wood Screw
Flat Washer
Spring Washer
Head Cap Bolt
Figure 2
Figure 3
Figure 4
Figure 1