Kitsound HAWAII 1.0 User manual

USER MANUAL
JB. 5359-b / Made in China. © KitSound™2 017.
Christchurch, Dorset, BH23 4FL, UK
All trademarks are acknowledged as the property of their
respective owners. Unless otherwise stated their use does not
imply that the trademark owner is aliated with KitSound or
endorses the products herein.
Your product and batteries must be recycled or disposed of
properly. Please contact your local recycling centre for more
information on proper disposal.
HAWAII 1.0
WIRELESS
SPEAKER
kitsound.co.uk

2 3
Please read this manual carefully
before use.
Box contents
• KS Hawaii wireless speaker
• Micro USB Charge cable
• User manual
Functions
1. LED input indicator
2. On/O switch
3. Micro USB charging port
4. Aux-in port
5. LED charge indicator
1
5
3 2
4

4 5
IPX5 rating
The speaker is rated IPX5. This means it protects
from water jets at any direction, but is not
impervious to large amounts of water.
Please do not directly immerse in water.
Instructions for use
Charging the speaker
1. Connect the USB charging cable to the
Micro USB charging port (3) and plug
into power
2. The LED charge indicator (5) will be red
whilst charging which will take up to 2 hours
3. Once fully charged the LED charge
indicator (5) will turn o
Note: Allow up to 4 hours for the rst charge.

6 7
Pairing the speaker to your device
1. Turn speaker on, and it will enter pairing
mode, with the LED input indicator (1)
ashing blue quickly
2. Turn your iOS, Android, or Windows device’s
Bluetooth ON and search for new devices
3. Select ‘KS HAWAII 1.0’. If asked for a
passcode, enter ‘0000’, and the device
will pair
Note: ’Bluetooth’ is a trademark of Bluetooth
SIG, Inc. This product is in no way aliated
with or endorsed by Bluetooth SIG Inc.
Re-pairing or pairing new devices
1. Turn wireless connectivity o on any
previously paired devices
2. Follow the ‘Pairing the speaker to your
device’ instructions
3. If a previously paired device is not present
within the wireless connectivity range then
the speaker will re-enter pairing mode

8 9
Playing music on your speaker
Wireless
When connected wirelessly, play the music on
your device and the sound will play through the
speaker. Some devices may require you to select
the audio output.
Auxiliary
1. Plug the cable into the speaker’s Aux-in
port (4) and your device
2. The LED input indicator (1) will glow a solid
red colour
Changing the volume
When playing music via wireless and auxiliary
inputs all volume and track controls are operated
from the master device e.g. smartphone or tablet.

10 11
Care for your Hawaii 1.0
Please DON’T:
• Submerge the Hawaii speaker in water
• Drop the Hawaii speaker as this will invalidate
your warranty
• Open up the Hawaii speaker. There are
no user serviceable parts inside
• Expose the Hawaii speaker to extreme
temperatures or rapid changes of hot
to cold or vice versa
Please DO:
• Clean the Hawaii speaker with a soft dry
cloth and no detergents
Please note:
Your device will have an internal amplier and if
it is playing digital les like MP3s it will also have
an integrated DAC (Digital Audio Converter).
If you turn the volume up to 100%, your device
will be sending a distorted signal. To avoid this,
and to get the best quality from the speaker, we
recommend that you do not run your device any
higher than 95% volume. Some devices output
higher than others, so you may need to reduce
the volume if you experience distortion.

12 13
Troubleshooting
We hope you’ve now got all the information you
need to get started, but if you’re having problems
with anything, please feel free to contact us at:
[e-mail]
S/N 69 dB
Wireless connectivity type V4.1
Wireless connectivity
distance
up to 10 m
Frequency response 100 Hz – 18 kHz
Drivers 1 x 40 mm
Output RMS 1 x 3 W @ 4 ohm
Play time up to 4 hours
Charging time up to 2 hours
Specications
Hereby, Kondor Ltd declares that the radio equipment type,
KSHAW1 Hawaii 1.0 Wireless Speaker, is in compliance
with Directive 2014/53/EU.
The full text of the EU declaration of conformity is available
at the following internet address:
http://kondor.co.uk/product-documents

14
The use and operation of this speaker is beyond our control.
Warranty of the KS Hawaii 1.0 is limited to defects caused by
faulty manufacture or defects in materials only. No warranty
whatsoever is given or implied for damage caused by the user
under any circumstances.
This does not aect your statutory rights.
Please do not attempt to open this product. There are no user
serviceable parts inside, in particular if your product has an
embedded, non-replaceable battery, do not attempt to access
or remove the battery as this may cause personal injury and will
damage the product.
Making any attempt to open the product or carry out repair
voids any and all warranties.
We apologise for any inconvenience caused by minor
inconsistencies in these instructions, which may occur
as a result of product improvement and development.