Kitsound CUBE User manual

USER MANUAL
CUBE
WIRELESS
SPEAKER
JB. 5583-a / KSCUBBT / Made in China.
© KitSound is a trademark of Kondor Limited, 2017.
Christchurch, Dorset, BH23 4FL, UK
kitsound.co.uk

2 3
Please read this manual carefully
before use.
Box contents
• KS Cube Wireless speaker
• USB charge cable
• 3.5 mm audio cable
• User manual
Instructions for use
Charging the battery
The Cube has a built-in rechargeable
lithium battery. Make sure the Cube is
switched o. Connect one end of the
USB power cable to the charging port
on the Cube and connect the other
end to your PC or USB mains adaptor.
The battery will start charging.
[continued...]

4 5
[...continued] Charging the battery
• It takes up to 4 hours to fully charge the
battery
• Whilst charging, the LED will be solid red
• When fully charged, the LED will turn o
Pairing the speaker to your device
Before you can use the speaker wirelessly,
it will need to be paired to your device.
To do this:
1. Switch the power button to the ON
position, wait for 5 seconds and the
indicator LED will ash blue
2. Press and hold the Play/Pause button
for 2 seconds and the LED will quickly
ash blue
3. Turn your device’s Bluetooth ON and
search for new devices
[continued...]

6 7
4. When the speaker appears in the list,
select it and if asked for a pass code,
enter ‘0000’
5. The speaker will then be paired to your
device and the LED will slowly ash blue
To pair additional devices to the speaker,
rst make sure the wireless connectivity is
turned o on any devices that have already
been paired to the speaker. Then follow the
above instructions from step 1.
Note: ‘Bluetooth’ is a trademark of
Bluetooth SIG, Inc. This product is in
no way aliated with or endorsed by
Bluetooth SIG Inc.

8 9
Using the speaker
Wireless
• (Vol+) Press and hold the + button
• (Vol–) Press and hold the – button
• (Play/Pause) Press the Play/Pause button
• (Next track) Press the Next Track button
• (Previous track) Press the Previous
Track button
Note: All of the above functions can also
be controlled on the device being used –
though this may not work on all devices.
Aux mode
• Plug one end of the 3.5 mm cable into
the Cube’s line-in port
• Plug the other end of the 3.5 mm cable
into your device
• Switch the Cube on and the LED will be
solid blue
• On your connected device, play your
music/videos and the audio will play
through the Cube
[continued...]

10 11
Call handling
• This only works through the speaker when
connected with the 3.5 mm audio cable
• To answer or reject the incoming call,
touch the relevant button on your device
• Play/Pause, Next Track and Previous track
buttons do not operate during the call
• You can change the volume of the call
with the Cube or on your device
• To hang up the call, touch the relevant
button on your device
• Volume is controlled on both the device
playing the audio and the Cube
• Play/Pause, Next Track and Previous
track buttons do not operate on the
Cube in Aux mode

12 13
Line-out
If you have more than one Cube speaker
(or any other speaker with a line-in), you
can pair them together for bigger sound.
To do this:
• Connect your device to the Cube (follow
the ‘Using the speaker’ instructions)
• Connect a 3.5 mm cable from the
line-out port on the Cube speaker to
the line-in port on another speaker
If the second speaker also has a line-out
port, you can then connect a third speaker.
You can continue chaining speakers
together for as long as you like.

14 15
Care for your Cube
Please DON’T:
• Get the Cube wet
• Drop the Cube as this will invalidate
your warranty
• Open up the Cube – there are no user
serviceable parts inside
• Expose the Cube to extreme temperatures
or rapid changes of hot to cold or vice versa
Please DO:
• Clean the Cube with a soft dry cloth and
no detergents
Other information
Your device will have an internal amplier and
if it is playing digital les like MP3s, it will
also have an integrated DAC (Digital Audio
Converter). If you turn the volume up to 100%,
your device will be sending a distorted signal.
To avoid this and to get the best quality from
the speaker, we recommend you do not run
your device any higher than 95% volume.
Some devices output higher than others,
so you may need to reduce the volume if
you experience distortion.

16 17
We hope you’ve now got all the information
you need to get started, but if you’re having
problems with anything, please feel free to
contact us at: [e-mail]
Hereby, Kondor Ltd declares that the radio
equipment type, KSCUBBT Wireless Speaker, is in
compliance with Directive 2014/53/EU.
The full text of the EU declaration of conformity is
available at the following internet address:
http://kondor.co.uk/product-documents.
Specications
Works with Bluetooth V2.1
Wireless connectivity
distance
up to 10 m
Play time up to 6 hours
Output RMS 3 W @ 4 ohm
S/N 80 dB
Frequency response 150 Hz – 18 kHz
Driver 45 mm
Battery Li-ion, 500 mAh
Aux-in 3.5 mm

18
We apologise for any inconvenience caused by minor
inconsistencies in these instructions, which may occur
as a result of product improvement and development.
Please do not attempt to open this product. There are
no user serviceable parts inside, in particular if your
product has an embedded, non-replaceable battery, do
not attempt to access or remove the battery as this may
cause personal injury and will damage the product.
Making any attempt to open the product or carry out
repair voids any and all warranties.
All trademarks are acknowledged as the property of
their respective owners. Unless otherwise stated their
use does not imply that the trademark owner is aliated
with KitSound or endorses the products herein.