Klimaire Kumr-903 User manual

DDWDW `FFF

KLIMAIRE KUMR-903 SMART OPERATION MANUAL

·Find the code from the brand code list. If there are too many

codes for one brand, try the ﬁrst. If it doesn’t work, please try

the second unl it does work. For example: KLIMAIRE, ﬁrst

you try ‘0260’, if it doesn’t work, try ‘0261, 262, 263’ etc.

·Press the ‘SELECT’ buon for 3 seconds and the brand code

on the LCD will ﬂash. Press or unl the required brand

code appears. Pressing the ‘MODE’ buon allows each press

to increase the code value in increments of a hundred. Then

press the ‘ENTER’ buon, the brand code will stop ﬂashing.

Seng is complete, and you can control your air condioner.

AUTO-SEARCH Code Seng

If you don’t know the brand of your air-condioner or can’t ﬁ nd

the required brand from the brand code list, please operate as per

the following steps:

·Press and hold the ‘SELECT’ buon for 6 seconds, then release it

(the code displayed on the LCD screen increases automacally).

When the air-condioner receives the corresponding signal and

produces a buzzer sound, press any buon to conﬁrm the sen g

quickly.

·Aer turning on the air condioner, try other funcon buon s. If

they don’t work, repeat above steps unl they do.

Every me the air condioner is turned on or switched between

diﬀerent modes, the ECO funcon sign will be displayed. In ECO

Mode, the air-condioner will automacally adjust temperature

sengs once there is no moon detected within the given me.

In ‘DELAYED STOP’ mode, the unit will stop running aer the set

me and will not turn back on automacally when moon is

detected.

DELAYED STOP

DELAYED STOP funcon is disabled when KUMR-903 is in ECO

Mode. To cancel the ECO seng and switch to DELAYED

STOP, press and hold the ‘PIR’ and ‘ENTER’ buons for 3

seconds, then press the ‘PIR’ buon to enter the DELAYED

STOP seng.

Pressing the ‘PIR’ buon at any me will cancel the DELAYED

STOP funcon. When KUMR-903 is turned OFF then back ON,

it will switch back to ECO as the default seng.

·Default seng: Will turn oﬀ the A/C in half an hour

without any moon detecon. This me is adjustable.

·Seng method: Press ‘TIMER’ and ‘SWING’ buons

simultaneously to enter the me seng mode. Then press

TEMP+ or TEMP- to adjust me, each press will increase or

decrease the seng for 0.5 hours (range is 0.5 – 4 hours).

·Press ‘ENTER’ to ﬁnalize the seng.

·Air-condioning unit will not turn back on automacally

when any moon is detected.

ECO Funcon

ECO funcon is the default seng for COOLING, HEATING

and DRY modes, and is acve each me the air condioner is

turned on or switched between diﬀerent modes.

To cancel the ECO seng, press and hold the ‘PIR’ and

‘ENTER’ buons for 3 seconds.

ECO seng is invalid in the FAN ONLY (Venlaon) mode.

KLIMAIRE KUMR-903 is a Universal Wireless Moon Remote

Controller with a moon sensor, programmable for unparalleled

energy savings up to 60% in the operaon of any air-condioning

system that incorporates a built-in remote-control receiver.

KUMR-903 can detect human moon within a 25-foot

distance and control the operaon of an air-condioner

according to the presence of human moon and can be

programmed to turn the air-condioner completely oﬀ or

have the seng temperature increased to a desired seng

for incredible energy savings.

It is capable of operang over 6,000 diﬀerent brands and

models of air-condioners.

BRAND CODE Seng

KUMR-903

· Default seng: Aer 15/30 minutes, the temperature rises

to 79/86F or 26/30C in cooling mode, and 68/61F or 20/16F

in heang mode. Time and temperature are both adjustable.

· Seng method: Press ‘TIMER’ and ‘MODE’ simultaneously

to enter the me seng. Then press TEMP+ or TEMP- to

adjust me. Each press increases 5 minutes (range is 5 – 60

minutes). Press ‘ENTER’ to ﬁnalize the seng.

· Press ‘TIMER’ and ‘FAN’ simultaneously to enter the

temperature seng. Then press TEMP+ or TEMP- to adjust

the temperature of the ﬁrst ECO period set. Each press

increases the temperature by 2F or 1C (range is 2-57F or 1-14C).

Press‘ENTER’ and the second period of temperature can be set.

Press ‘ENTER’ to conﬁrm the sengs.

· In ECO mode when any moon is detected, the air-

condioning unit will reset back to its original seng.

PIR (Passive Infrared) Human Detecon Seng

The ‘PIR’ buon is used for ‘ECO’ and ‘DELAYED STOP’ funcons.

ECO funcon is the default seng for COOLING, HEATING and DRY

modes. The ‘DELAYED STOP’ funcon is disabled when

HCUMR-902 is in ECO mode.

The sensor detects emied infrared energy from objects

(humans and animals) in the form of heat.

www.klimaire.com BG

KUMR-903 SMART OPERATION MANUAL

Klimaire KUMR-903 Technical Parameters

Distance to A/C Unit: 25 ft ( 8 m )

Power: DC 4.5 V ( 3 AAA batteries, not included )

Battery Life: Apx. 6 months

Dimensions WxHxD in (mm): 4 ⅜ x 1 ¾ x ⅞ ( 112 x 44 x 22 )

Weight: 3 Oz ( 80 gr. )

KUMR-903 SMART INSTALLATION

The unit can be placed on a desk or table with its own

stand.

For wall-mounng, please use the two small screws

provided in the package and install them at eye level with

2 ¾” (70mm) spacing between each mounng hole.

Mount KUMR-903 at a visible locaon that will

communicate with the air-condioning unit receiver with

no major obstacles between the two. The unit is provided

with mul-angle signal transmission.

No wiring will be required for this installaon.

TIMER ON Seng

You can set the mer on only aer turning oﬀ your air-

condioner.

·Press the ‘TIMER’ buon, the clock signal ‘ON’ appears

on the LCD and me-ﬂashes.

·Press and buons to adjust the me you want to

turn on the air-condioner.

·The indicated me will cease ﬂashing aer 10 seconds.

The LCD will display the current me and mer signal

‘ON’. Then the seng is completed.

TIMER OFF Seng

You can set the mer oﬀ only aer turning on your air-

condioner.

·Press the ‘TIMER’ buon, the clock signal ‘OFF’ will appear

and me-ﬂash on the LCD display.

·Press and buons to adjust the me you want the

air-condioner to turn oﬀ.

·The displayed me will stop ﬂashing aer 10 seconds. The

LCD will display the current me and mer signal ‘OFF’.

This indicates the mer OFF seng is ﬁnalized.

·The me range you can set is 00 – 24 hours.

1) Press the ‘TIMER’ buon twice in succession,

the mer ON/OFF function is now canceled.

2) Press the ‘TIMER’ buon to check the me of

the mer on the LCD display.

3) Aer the mer seng ﬁnalizes, ensure the

remote is aiming at the air-condioner and

within eﬀecve range, otherwise the seng

would be invalid.

e-mail: [email protected]om

KUMR-903 06/20

CLOCK Seng

·Press the ‘CLOCK’ buon; the clock on the LCD will

ﬂash.

·Press the and buons to adjust the current me

·Press the ‘CLOCK’ buon again, the clock on the LCD

will stop ﬂashing, indicang the seng is ﬁnished (if

you don’t press the ‘CLOCK’ buon, it will be

ﬁnished automacally aer 10 seconds).

NIGHT LIGHT Seng

·To turn on the night light, press the ‘ MODE’ and

‘ENTER’ buons simultaneously.

You will see displayed on the LCD. This indicates

the night light funcon is on.

To turn oﬀ the night light, press the ‘ MODE’ and

‘ENTER’ buons simultaneously.

The will disappear from the LCD display.

·The light will turn on when moon is detected. It will

turn oﬀ in 15 seconds when you go to bed or leave

the room, making it convenient and energy-saving.

C / F Funcon

·Default seng: F (range 61 – 86F or 16 – 30C)

adjustable in 1-degree increments for either F or C.

·Seng method: Press TEMP+ and TEMP-

simultaneously to convert C to F and vice versa.

www.klimaire.com

www.klimaire.com BG

KLMAIRE KUMR-903 SMART OPERATION MANUAL

BRAND CODE TABLE

www.klimaire.com BG

KLIMAIRE KUMR-903 SMART OPERATION MANUAL

BRAND CODE TABLE

ON OFF UP

DOWN PIR MODE FAN SWING CLOCK TIMER SELECT ENTER NOTES

BRAND CODE Seng 2.Press

1.Press

3 Sec.

You can ﬁnd the CODE from BRAND Lisng in

the manual and insert directly in the control.

AUTO CODE Search 1.Press

6 Sec. 2.Press ** Press when buzzer is heard & set code

To Cancel ECO Mode Press

3 Sec.

Press

3 Sec.

Press both PIR & ENTER simultaneously

for 3 sec.

Cooling & Heang Mode

Time Seng Changes 2.Press 1.Press

Simul.

1.Press

Simul. 3.Press Default seng is 15/30 mins.

Can be set for 5 - 60 Mins

Cooling Mode (2 steps)

Temp. Seng Changes

2.Press

4.Press

1.Press

Simul.

1.Press

Simul.

3.Press

5.Press

Default seng is 26C/30C in Cool.

Can be set for 23C-30C. (73F-86F)

Heang Mode (2 steps)

Temp. Seng Changes

6.Press

8.Press

7.Press

9.Press

Default seng is 20C/16C in Heat.

Can be set for 23C-16C. (73F-61F)

DELAYED STOP

( Aer cancelling ECO) Press Disabled when system is in ECO Mode.

DELAYED STOP

Time Seng Changes 2.Press 1.Press

Simul.

1.Press

Simul.

Default seng is 30 mins.

Can be set for 0.5 - 4 hrs.

DELAYED STOP

Cancelling Press Pressing "PIR" buon at any me, will cancel

the DELAYED STOP funcon.

C / F To Convert C to F Displayed

(or vice versa)

Press

Simul.

Default seng is "F" and is adjustable in one

deg. increments.

NIGHT

LIGHT NIGHT LIGHT Seng 1.Press

Simul.

1.Press

Simul.

Half Moon will be displayed if funcon is ON. Light will

turn on when moon is detected and will turn oﬀ 15

sec. aer no moon is detected.

CLOCK

CLOCK Seng 2.Press

1.Press

3.Press

When the "CLOCK" buon is pressed, the

clock on the LCD display will start ﬂashing.

TIMER ON Seng 1.OFF 3.Press 2.Press 4.Press

Will stop ﬂashing 10 sec aer seng and

"Timer ON" signal will be displayed.

TIMER OFF Seng 1.ON 3.Press 2.Press 4.Press

Will stop ﬂashing 10 sec aer seng and

"Timer OFF" signal will be displayed.

TO CANCELL TIMER Press

2 X Press 2 mes in succession.

TO CHECK TIMER SETTING Press

1 X

Press TIMER buon once to see the ming set

on LCD display.

1. ECO Funcon is the default seng for Cooling, Heang & Dry Modes. Every me the air condioner is switched on or switched between modes, ECO sign will be displayed.

2. The original Air Condioning Remote Control can sll be used to control the air condiioning's funcons when KLIMAIRE moon control is also installed and operaonal in the same room.

KLIMAIRE KUMR-902 Universal Moon Remote

Parameters Seng Table

SETTINGS Available

NOTES

BRAND

CODE

ECO

MODE

(Default)

DELAYED

STOP

TIMER