Klip Xtreme Harmonium KSB-001 User manual

KSB-001
Harmonium

English
I. Introduction
Main features
II. Package content
Congratulations on the purchase of your new KlipXtreme®KSB-001 soundbar
with Bluetooth®wireless technology.
We invite you to visit us at www.klipxtreme.com for support and to find out
more about this audio system and other new and exciting products.
To get the most of your new soundbar, please take a few minutes to read the
following instructions and familiarize yourself with the operation of the unit.
Before setting up the device, make sure that the following items are included in
the box:
Unpack your unit carefully. We recommend that you save the box and all original
packing materials, in case you wish to store the unit, or if you ever need to return
it for service.
• 32-inch 2.0 channel soundbar with a modern and space-saving design, which
delivers high quality audio from wired or wireless devices
• 100 watts of total power output through two powerful 2-inch drivers
• Optical digital input and auxiliary 3.5mm jack with cables included
• Two full range 2in drivers and a passive bass booster tube deliver deep bass
• HDMI Arc connection to watch visual content in a large screen
• Bluetooth®v5.0 functionality to stream music wirelessly from compatible
devices within a range of up to 33 feet
• LED display showcases the selected mode
• Desktop or wall mount design for versatile configuration
• Remote control with EQ sound profiles
• Soundbar (1)
• 3.5mm to RCA audio cable (1)
• Digital optical cable (1)
• Remote control with batteries (1)
• AC/DC adapter (1)
• Quick instruction guide (1)

HDMI/ARC OPTI USB AUX IN DC IN
Back panel
Side panel
III. Product overview
1. Power button
2. Play/pause
3. Play previous/volume –
4. Play next/volume +
1. HDMI input
2. Optical input
3. USB port
4. Aux input
5. Power input
Control Description
1. Power/mode Press this button to power, press and hold to turn it off.
Press this button to select the audio input mode for playback.
2.
1 2 3 4 5
Press this button to play or pause audio playback. It doesn’t
work in Auxiliary mode.
Press and hold this button to play the previous track. Press
it to decrease the volume level.
3.Vol.-
Press and hold this button to play the next track. Press
once to increase the volume level.
4.Vol.+
1
2
3
4

Remote control
An infrared remote control is included which provides additional functions to
allow greater control over the soundbar.
Note: Install the supplied batteries in the remote control following the correct
polarity as indicated inside the compartment. In order for the remote to operate
properly, ensure that it is pointed toward the front of the soundbar.
VOL+
VOL-
BASS+
BASS-
EQ
1
2
6
6
10
11
12
14
PAIR INPUT
TREB- TREB+
3
4
5
8
9
7
13
MUTE

IV. Preliminary steps
21in
1. The soundbar can be placed on a desktop or hanged on the wall.
2. If you decide to mount the soundbar on the wall, determine the location and
mark the holes on the surface. The drilled holes must be placed about 21
inches apart from each other.
3. For gypsum or wooden walls, locate studs in the wall. You may use a stud
finder to determine the center of each stud.
4. Drill pilot holes and insert anchors if installing the unit on a concrete or brick
wall.
Buttons Description
1. Power button
2. Pair button
Press this button briefly to turn the soundbar on or off.
Press this button to connect or disconnect the paired
Bluetooth®device.
3. Mode button Press this button to switch modes through Bluetooth®,
HDMI (Arc), USB, Aux, and optical.
4 . Vol . + Press the Vol + button to increase the volume coming from
the soundbar.
5. Previous track Press this button to select the previous track on your
playlist. Available in BT and USB modes.
6. Play/pause Press this button to play or pause the audio coming from
the soundbar. Available in BT and USB modes.
7. Next track Press this button to select the next track on your playlist.
Available in BT and USB modes
8 . Vol . - Press the Vol - button to lower the volume coming from
the soundbar.
Buttons Description
9. Treb. - Press this button to decrease (high) frequencies of the
soundbar. Available in all modes.
10. EQ button Press this button to select the equalizer profile of your
choice (EQ0, EQ1, EQ2). Available in all modes.
EQ0: News and dialogue mode
EQ1: Music mode
EQ2: Movie mode
11.Treb. + Press this button to increase (high) frequencies of the
soundbar. Available in all modes.
12. Bass - Press this button to decrease (low) frequencies of the
soundbar. Available in all modes.
13. Bass + Press this button to increase (low) frequencies of the
soundbar. Available in all modes.
14. Mute Mutes the audio coming from the soundbar. Press it again
to unmute the soundbar.

V. Optical digital and Auxiliary connections
1. Insert one end of the supplied optical digital cable into the matching input jack
on the back of the soundbar and the other end on the device you wish to play
audio from.
2. For Aux wired playback, connect one end of the supplied auxiliary cable to the
corresponding port on the soundbar and the other end to audio devices fitted
with a 3.5mm jack.
3. Plug the AC cable into a wall outlet.
4. Turn on the soundbar by pressing the Power button located on the right side
panel of the unit. You can also press the red Power button on the remote
control.
5. Select the input mode by pressing the Mode button located on the right-side panel.
6. Using the controls on the remote, you can manage and select your tracks,
increase, or lower the volume, mute the sound bar audio, etc.
5. Drive the screws into the holes with a screwdriver, leaving some space
between the head and the wall surface.
6. Make all the necessary cable connections before mounting the soundbar on
the wall (Aux. or Optical input cables).
7. Once all connections have been completed, carefully slide the soundbar over
the screws you just installed.
8. Now you can plug the AC cord of the soundbar into a wall outlet and the
soundbar is ready to use.

Note: Before installing this product, please make sure your device is compatible
with Bluetooth®.
1. First turn on the soundbar by pressing the Power button on the side panel
or on the remote control. Bluetooth®(BT) is the selected mode by default. Or
select the BT mode by pressing the mode selection button in the remote control.
The BT indication will appear on the LED display
2. Place both devices not more than three feet away from each other.
3. Enable the Bluetooth®function on your audio device and set it to discover the
wireless soundbar.
4. The BT icon will start blinking to indicate that the system has entered into the
pairing mode.
5. Once the soundbar appears listed under the newly found Bluetooth®devices
(KSB-001), the pairing process will start.
6. If pairing is successful, the voice prompt “Bluetooth connected” will be heard.
7.If after 60 seconds the pairing process fails, please repeat steps 1 through 6
described above.
- The unit is not turning on. Check and make sure the power cord is connected
correctly to the power source.
- There is no sound coming from the soundbar, or the sound is distorted. Make
sure the audio cable is connected correctly. Turn up the volume slowly. Press
the mute button in case it was pressed accidentally muting the soundbar.
- The remote control doesn’t work. Install two AAA batteries in the remote.
Replace the current batteries with new ones. Point the remote control toward
the front of the soundbar; and make sure it is within the operating range.
- The buttons on the soundbar don’t work. Unplug the soundbar, plug it to a
power supply and turn it on again.
Pairing the sound bar with your Bluetooth®device
VI. Advanced operation Troubleshooting

VII. Technical specications
MPN KSB-001
2.0 channel soundbar
100W
Yes, 0.4W
110-240V -- 50/60Hz (autosensing)
Power/mode, pause/resume, play previous/volume -,
play next/volume +
Device
Type
Reference RMS
Standby mode
AC input
Buttons
2x 2in full range drivers + a passive bass booster tube
50Wx2=100W
45Hz-20kHz
4Ωx2
</=1%(1K/1W)
≥ 72dB
Bluetooth® v5.0 compatible, USB input
HDMI (ARC), optical digital, 3.5mm Auxiliary
2.4GHz
33ft
Speaker
Driver unit
Maximum power output (RMS)
Frequency
Impedance
Sensitivity
Signal to noise ratio
Connectivity
Connection type
Audio input ports
Wireless frequency
Wireless range
Additional information
Display
Equalizer
Dimensions (WxDxH)
LED
Yes, preset
31.6x2.3x2.3in
Additional information
Weight
Cable length
Package contents
Warranty
2.6lb
5ft
Soundbar, Auxiliary cable, digital optical cable,
remote control, quick instruction guide, AAA batteries,
AC/DC adapter
One year

NOTES
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception,
which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
FCC statement

Español
I. Introducción
Características
II. Contenido del empaque
Felicitaciones por la compra de su nueva barra de sonido KSB-001 , de
KlipXtreme®con tecnología inalámbrica Bluetooth®.
Lo invitamos a visitar nuestra página web en www.klipxtreme.com en caso de
solicitar asistencia o si desea conocer más acerca de este sistema de audio y
otros innovadores productos
Para aprovechar al máximo este sistema de parlantes, tómese unos minutos para
leer las siguientes instrucciones y familiarizarse con el funcionamiento de la
unidad. Antes de conectar el dispositivo, verifique que los artículos a continuación
hayan sido incluidos en el empaque:
Remueva cuidadosamente el aparato de la caja. Es recomendable que conserve la
caja y todo el empaque original si pretende almacenar la unidad o en caso de
necesitar enviarla para recibir servicio técnico.
• Barra de sonido de 2.0 canales de 32 pulgadas con diseño moderno y que
propicia el ahorro de espacio para reproducir audio de excelente calidad
desde dispositivos inalámbricos o alámbricos
• 100 watts de potencia total de salida a través de dos poderosos parlantes de
2 pulgadas
• Entrada óptica digital y de 3,5mm con cables incluidos
• Dos parlantes de 2 pulgadas y un tubo con refuerzo de bajos proporcionan
bajos profundos
• Entrada HDMI Arc para ver contenido visual en pantalla grande
• Funcionalidad Bluetooth®v5.0 para reproducir música inalámbricamente desde
dispositivos compatibles a una distancia de hasta 10 metros
• Pantalla LED que muestra el modo seleccionado
• Diseño de configuración versátil para colocar sobre una superficie o montar
en la pared
• Control remoto permite escoger perfiles de sonido mediante el ecualizador
• Barra de sonido (1)
• Cable de audio 3,5mm a RCA (1)
• Cable óptico digital (1)
• Control remoto con baterías (1)
• Adaptador de CA/DC (1)
• Guía de instalación rápida (1)