Klip Xtreme TitanPro User manual

KBS-300
TitanPro

English
I. Introduction
II. Product overview
Front Back
Thank you for purchasing the KlipXtreme KBS-300 True Wireless Stereo speaker
with wireless technology. We encourage you to thoroughly read this quick installation
guide to get the most out of this portable wireless audio device.
Main features
• Portable speaker suitable for multiple indoor/outdoor activities.
• Stream amazing sound to the world with 16 watts of total output power.
• Includes TWS technology, designed to stream audio wirelessly through two
separate units simultaneously from the same audio source4
• Features Bluetooth®V5.0 compatible technology designed to deliver a stronger
signal at high wireless ranges2
• Play your favorite songs for up to 20 hours of playtime on a single charge to enjoy
hours of leisure in the outdoors3
• IPX7 waterproof protection against rain, spills, or water penetration to a depth of
1 meter for 30 minutes1
• Two 50mm full range drivers deliver a blasting listening experience
• Features a 3.5mm port to directly connect your mobile device using an auxiliary
cable to save battery life
• Robust design to withstand weather conditions
• Hands-free conversations functionality to answer or make calls from the speaker
even when you’re busy outside
Package content
• 1 wireless speaker
• 1 Micro USB charging cable
• 1 3.5mm auxiliary cable
• Quick installation guide
AUX DC 5V
2
1
3
4
5
76
8
10
9

III. Basic operation
A. Charging the speaker
• Plug one end of the supplied Micro USB cable into the speaker’s Micro USB port
and the other end to the USB port of a 5V USB adapter to charge the battery.
• The battery takes around 3.5 hours to fully charge.
• Make sure that the speaker is fully charged before using it for the first time.
• While the speaker is being charged the battery LED indicator glows red with the
speaker on or off.
• Once the speaker is fully charged, the battery LED indicator turns off.
Note: If the speaker is completely discharged or has not been charged for a while, it
is recommended to charge it for at least 10 minutes prior to powering on the
speaker.
1. Lanyard
2. Power/mode button
3.Volume up +/next track button
4. Volume down -/previous track
button
5. Microphone
6. Play/pause/answer call/end
call/redial/Bluetooth®/ multifunction
button
7. LED function indicator
Components Description
Carrying string for easy transport.
Hold the button for power on/off, press the button to
change between Aux mode and TWS. Press it twice
forTWS pairing mode.
Note: You will only be able to change modes if a
device is connected to Aux In in the speaker.
In order to adjust the volume level, briefly press the +
button. Press and hold the +button to play the next
track.
In order to adjust the volume level, briefly press the -
button. Press and hold the -button to play the
previous track.
Microphone location
Briefly press this button to play or pause audio. Briefly
press this button to answer an incoming call or end
the call. Press and hold this button to reject the call.
Press this button twice to call back the last number
dialed on your phone. Note: Audio will stop and
resume automatically once the call is ended. Press and
hold this button to release Bluetooth®connection.
Bluetooth®mode/search status: White LED.
Successful pairing: White LED blinks slowly.
Aux mode: White LED.
Mute: White LED blinks slowly.
8.Aux in cable connection interface
9. Battery LED charge indicator
10. Micro USB charging port
Use this input to connect any external audio device
fitted with a 3.5mm stereo output.
This LED indicates the charging status of the
speaker while it is powered on. Red LED indicates
the unit is charging.The red LED will turn off when
fully charged.
Use this Micro USB connector to connect to an
external 5V power source

IV. Advanced operation
Note: Before installing this product, please make sure your device has the built-in
Bluetooth®feature available.
A. Pairing the speaker with your mobile device in Bluetooth®mode
1. Turn on the speaker.
2. Set your Bluetooth®phone to “discover” the wireless speaker.
3. The Bluetooth®indicator LED will start blinking to indicate that the device has
entered into the pairing mode and is ready to be detectable for the first time.
4. Tap the newly discovered audio device (KBS-300) displayed on your mobile
phone, in the Bluetooth®list.
5. If you have a lower Bluetooth®version, you may be prompted to enter the passkey
0000 (4 zeros).
6. If pairing is successful, a tone will be heard, and the LED light will glow in blue. If
after 60 seconds the pairing process fails, please repeat steps 1 through 6 described
above.
7. We recommend turning off the device when not in use. The speaker will shut off
automatically after a period of inactivity, as long as it is not in the Bluetooth®mode.
Note: The speaker will connect to Bluetooth®automatically if the device supports
automatic connection.
B. Pairing the speaker with your mobile device in TWS mode
1. Power on the two KBS-300 speakers .
2. Press twice the power/mode button on both speakers to enter TWS mode,
the white LED will blink quickly.
B. Turning the speaker units on or off
• To turn on the speaker, press and hold the power/mode button for about 2
seconds.
• The Bluetooth®indicator LED will turn on and you will hear a tone. The Bluetooth®
LED will blink in white.
• Press and hold the power/mode button again for 2 seconds to turn off the speaker.
The Bluetooth®LED will turn off and you will hear an audio tone.
• Adjust the volume on your audio device to the desired level.
• Press the +or –button on the unit to adjust the unit’s volume.
• Hold the +or –button on the device to go to the previous or next track.
• Press the multifunction button at the same time than the power/mode button to
play or pause music.
C. Using the speaker in Auxiliary mode
• Connect one end of the 3.5mm stereo cable into the auxiliary port on the speaker.
• Proceed to connect the other side of the 3.5mm stereo cable into the media
device of choice, such as a laptop, music player, smartphone or tablet.
• Turn on the speaker. The speaker will automatically connect the Aux in.
• If it doesn’t connect, briefly press the power button on the speaker to select the
Aux in mode or the mode of choice.
• Select the input mode of choice using the source button on the unit.
• Play an audio file to listen to music.
• Press the +or –button on the unit to adjust the system volume.

3. You will hear a tone after both units are paired, the master unit will remain in
pairing mode.
4. Turn on Bluetooth® on the audio device and pair it with the master unit as
instructed in section A.
C. Unpairing speaker from TWS mode
Quickly press twice the power/mode button on the master unit, the Bluetooth®
LED on the second unit will start blinking (a tone will also be emitted). Once you
hear the tone, TWS un-pairing was successful.
V. Using the speaker to answer or end a call
• When there is an incoming call, the speaker will generate a tone to alert you of this
event.
• Press the multifunction button to answer the call on the speaker, you can talk close
to the speaker as the built-in microphone is located on the upside of the
multifunction button, it will allow clear voice reproduction. You may also press the
answer button on your phone to take the call using the speaker.
• To end a call, press the multifunction button once again. Likewise, you may also
end the call directly using the command on your cell phone.
• When listening to music using your mobile phone, playback will resume
automatically once the call has ended.
• Press the multifunction button for approximately two seconds on the speaker in
order to reject an incoming call.
• Press the multifunction button twice to call back the last number dialed on your
phone.
The unit will not power on
Can't hear any sound
Sound from the speaker is distorted
Can't pair the speaker with my
Bluetooth®device
VII. Troubleshooting
Problem Solution
Make sure the speaker is turned on. Check if the
speaker is fully charged
Make sure the volume of the speaker is not at
the minimum setting. Make sure the connected
audio device is playing audio
Lower the volume level of the speaker or the
connected device
Make sure the Bluetooth®mode of your device is
turned on.Your Bluetooth®device may be out of
range.Try moving it closer to the speaker. Move
your Bluetooth®device and/or the speaker away
from other devices that generate
electromagnetic interference, such as phones,
microwave ovens, wireless network routers, or
other Bluetooth®devices
VI. Music playback
Note: Music playback will work individually or in TWS mode.
• Press the multifunction button to start and stop audio playback.
• Press and hold the +button to play the next track.
• Press and hold the –button to play the previous track.
• In order to adjust the volume level, briefly press the +or –button.

VIII. Technical specifications
KBS-300
Portable outdoor waterproof IPX7 Bluetooth®
speaker
16W
5V 1A
IPX71
Ye s
True Wireless Stereo (TWS) capability.Two
speakers (same model) must be used together at
the same time4
2x 2in full range drivers + 2x passive radiators
16W (2x8W)
80Hz-16kHz
3 Ohm
>=80dB
BT 80dB, AUX 65dB
10%
Omnidirectional
50Hz~10kHz
2.2KΩ
-38dB±3dB
Device
Type
Maximum power output (RMS)
DC input
Special features
Waterproof rating
Hands-free calls capability
Special feature
Speaker
Driver units
Maximum power output (RMS)
Frequency
Impedance
Sensitivity
Signal to noise ratio
THD
Microphone
Directivity
Frequency
Impedance
Sensitivity
Bluetooth®V5.0 and 3.5mm AUX input
2402~2480Hz
Up to 32ft2
5V/1800mAh lithium-ion rechargeable battery
Approximately 3 hours
Up to 20 hours at 50% volume3
Approximately 80 hours
Micro USB
7.8x3.3x3.3in
1.1lb
39.3in
Speaker unit/quick instruction guide/ Micro USB
cable/Aux cable
One year
Connectivity
Connection type
Wireless RF frequency
Wireless range
Battery
Battery type
Battery charging time
Battery run time
Battery standby time
Battery charging method
Additional information
Dimensions (HxLxW)
Weight
Cable length
Package contents
Warranty
1 Can be submerged in water up to 1 meter for 30 minutes.
2 Range estimate is based on an area free and clear of obstacles and interference, and within the line of sight
between devices.
3 Depending on the volume level and type of audio file being played.
3 Second speaker not included in the box.TWS function works only with the same type of unit.

FCC statement
This equipment has been tested and found to comply with the limits for a Class B
digital device, pursuant to part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference in a residential installation.
This equipment generates, uses, and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions, may cause harmful
interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the
receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
Precautions
• Do NOT drop, hit, or shake the device.
• Do NOT disassemble, repair, or modify the speaker yourself. It voids the warranty
and may damage the product.
• Do NOT use cleaning products that contain benzene, solvents, or alcohol.
• Do NOT expose the speaker to excessive heat or to direct sunlight for long
periods of time.
• Do NOT place heavy objects on top of the speaker.
• Do NOT use near a microwave oven or to wireless LAN products.
• Only charge with devices rated and marked with 5V to avoid damage to the
speaker.

Español
I. Introducción
Gracias por su compra del parlante estéreo inalámbrico con capacidad True Wireless
Stereo KBS-300 de KlipXtreme. Te recomendamos que leas detenidamente esta guía
de rápida instalación para aprovechar al máximo este aparato portátil de audio
inalámbrico.
Principales características
• Parlante portátil adecuado para actividades en interiores o exteriores
• Difunde sonido sorprendente al mundo con 16 watts de potencia máxima de salida
• Incluye tecnología TWS, diseñada para transmitir audio inalámbricamente a través de dos
unidades de forma simultánea desde la misma fuente de audio4
• Cuenta con la tecnología Bluetooth®V5.0 diseñada para ofrecer una señal más fuerte a
mayores distancias inalámbricas2
• Reproduce tus canciones preferidas hasta 20 horas con una sola carga para disfrutar
períodos de ocio al aire libre3
• Clasificación IPX7 de protección contra lluvia, derrames o penetración de agua hasta una
profundidad de 1 metro por 30 minutos1
• Dos unidades de gama completa de 50mm ofrecen una experiencia de sonido explosiva
• Incluye un puerto de 3,5mm para conectar el parlante directamente a un cable auxiliar
para ahorrar batería
• Diseño robusto para soportar condiciones ambientales
• Conversaciones con funcionalidad de manos libres para contestar o hacer llamadas desde
el parlante incluso cuando estás ocupado afuera
II. Vista general del producto
Frente Posterior
Contenido de la caja
• 1 parlante inalámbrico
• 1 cable Micro USB para recarga
• 1 cable auxiliar de 3,5mm
• Guía de instalación rápida
AUX DC 5V
2
1
3
4
5
76
8
10
9

III. Funcionamiento básico
A. Cómo cargar el parlante
• Conecta un extremo del cable Micro USB proporcionado al puerto Micro USB del
parlante y el otro extremo al puerto USB de un adaptador USB 5V para cargar la
batería.
• La batería toma cerca de 3,5 horas para cargarse totalmente.
• Asegúrate de que el parlante esté totalmente cargado antes de usarlo por primera vez.
• Mientras el parlante se carga el indicador LED de la batería se ilumina en rojo sin
importar si el parlante está encendido o apagado.
• Una vez que el parlante se carga plenamente, el indicador LED de la batería se apaga.
Observación: Si el parlante está totalmente descargado o sin cargar por un tiempo, es
recomendable cargarlo por lo menos 10 minutos antes de encenderlo.
1. Cordón
2.Alimentación de energía/botón
de modalidad
3. Botón de subir el volumen
+/próxima pista
4. Botón de bajar el volumen -/
pista anterior
5. Micrófono
6. Reproducir/poner en
pausa/contestar una llamada/
colgar/rediscar/Bluetooth®/botón
multifunción
Componentes Descripción
Cordón para fácil transporte.
Mantén oprimido el botón para encender o apagar, presiona
el botón para cambiar entre modo Auxiliar yTWS. Presiona
el botón dos veces para activar el modoTWS.
Nota: Solo podrás cambiar de modalidad si un dispositivo
está conectado a la entrada auxiliar del parlante.
Presiona brevemente el botón +para ajustar el nivel del
volumen.
Oprime por dos segundos el botón +para reproducir la
siguiente canción.
Presiona brevemente el botón – para ajustar el nivel de
volumen.
Oprime por dos segundos el botón – para reproducir la
canción anterior.
Ubicación del micrófono
Presiona brevemente este botón para reproducir o
poner el audio en pausa.
Oprime este botón brevemente para contestar o colgar una
llamada.
Mantén presionado este botón para rechazar una llamada.
Oprime este botón dos veces para rediscar el último
número registrado.
Nota: El audio se detendrá y la reproducción se reanudará
automáticamente cuando termines la llamada.
Mantén presionado este botón para desconectar Bluetooth®.
7. Indicador LED de funciones
8. Interfaz de conexión de cable
de entrada auxiliar (Aux in)
9. Indicador LED de la carga de la
batería
10. Puerto de carga Micro USB
Bluetooth®/estatus de búsqueda: LED blanco.
Emparejamiento exitoso: LED blanco parpadea lentamente.
Modalidad auxiliar: LED blanco.
Silenciar: LED blanco parpadea lentamente.
Usa esta entrada para conectar cualquier dispositivo de audio
externo equipado con una salida estéreo de 3,5mm.
Este LED indica el estatus de carga del parlante mientras está
encendido. El LED rojo indica que la unidad se está cargando.
El LED rojo se apagará cuando tenga carga plena.
Utiliza este conector Micro USB para conectar a una fuente
de alimentación 5V externa.

IV. Funcionamiento avanzado
Observación: Antes de instalar este producto asegúrate de que tu dispositivo cuenta
con Bluetooth®integrado.
A. Cómo emparejar el parlante con tu dispositivo móvil en el
modo Bluetooth®
1. Enciende el parlante.
2. Configura tu teléfono a Bluetooth®para “descubrir” el parlante inalámbrico.
3. La luz LED de Bluetooth®comenzará a parpadear para indicar que el dispositivo
entró al modo de emparejamiento y está listo para ser detectado por primera vez.
4. Selecciona el dispositivo de audio recién descubierto (KBS-300) que aparece en tu
teléfono celular en la lista de Bluetooth®.
5. Si tienes una versión anterior de Bluetooth®es posible que tengas que ingresar la
contraseña 0000 (4 ceros).
6. Si el emparejamiento tiene éxito, escucharás un tono y la luz LED azul se pondrá
sólida. Si después de 60 segundos el proceso de emparejamiento falla, repites los
pasos 1 al 6 descritos arriba.
7. Recomendamos que apagues el aparato cuando no lo uses. El parlante se apagará
automáticamente luego de un período de inactividad siempre y cuando no esté en
el modo Bluetooth®.
Observación: El parlante se conectará a Bluetooth®automáticamente si el dispositivo
ofrece soporte a la conexión automática.
B. Cómo emparejar el parlante con tu dispositivo móvil en el modo TWS
1. Enciende los dos parlantes KBS-300.
B. Cómo encender o apagar el parlante
• Para encender el parlante presiona por dos segundos el botón de alimentación/mo-
dalidad .
• El indicador LED de Bluetooth®se encenderá y escucharás un tono. El LED de
Bluetooth®parpadeará en blanco.
• Presiona de nuevo por dos segundos el botón de alimentación/modalidad para
apagar el parlante. El indicador LED de Bluetooth®se apagará y escucharás un tono.
• Ajusta el volumen en tu dispositivo de audio en el nivel deseado.
• Mantén oprimido el botón +o –en la unidad para ajustar el volumen en el parlante.
• Presiona el botón –o +en el dispositivo para ir a la pista anterior o a la siguiente.
• Oprime el botón multifunción al mismo tiempo que el botón de alimentación/moda-
lidad para reproducir o pausar la música.
C. Cómo usar el parlante en el modo Auxiliar
• Conecta un extremo del cable estéreo de 3,5mm al puerto auxiliar del parlante.
• Procede a conectar el otro extremo del cable estéreo de 3,5mm al dispositivo de
medios de tu elección como una laptop, reproductor de música, teléfono inteligente
o tableta.
• Enciende el parlante. El parlante se conectará automáticamente a la entrada Auxiliar.
• En caso de no conectarse, presiona brevemente el botón de alimentación/modalidad
del parlante para seleccionar el modo de entrada auxiliar o el modo de preferencia.
• Selecciona el modo de entrada usando el botón fuente en la unidad.
• Reproduce un archivo de audio para escuchar música.
• Oprime el botón +o –en el parlante para ajustar el volumen.