Klipsch R-5650-W User manual

R-5650-W
Sophisticated, yet uncomplicated, the
Klipsch R-5650-W in-wall loudspeaker will
forever change the way you view or listen to
architectural audio. Whether used for home
theater or stereo music applications, this
high-quality and installer-friendly model
challenges the performance of comparable
stand alone speakers.
By featuring a 6.5-inch Cerametallic™
woofer cone, 1-inch titanium tweeter mated
to a pivoting Tractrix® Horn, as well as
treble and bass contour switches, there’s no
denying this speaker’s natural precision,
clarity and efficiency.
Available in a white finish, the R-5650-W can
be paired with one of Klipsch’s new
installation kits (sold separately). Each of
these revolutionary kit designs allow for
increased mounting flexibility and
incorporate a mud ring, wire tie and
universal metal mesh wing for multi-position
placement and a color-coded bracket for
easy speaker size identification.
6.5" Two-Way In-Wall Loudspeaker
SPECIFICATIONS
FREQUENCY RESPONSE 52Hz-20kHz ± 3dB
SENSITIVITY 93dB @ 1 watt/1 meter
NOMINAL IMPEDANCE 8 ohms
CROSSOVER FREQUENCY 2500Hz
POWER HANDLING 50 watts (200 watts peak)
ENCLOSURE MATERIAL/TYPE ABS/ Infinite baffle, front flush with wall
DRIVE COMPONENTS Two-way system using one 1" (2.54cm)
Titanium dome compression tweeter with a
6" (15.24cm) square 90˚x 60˚pivoting
Tractrix®Horn and one 6.5" (16.51cm)
aluminum cone woofer
WIRE GAUGE ACCOMMODATED 12
WEIGHT 7.2 lbs. (3.25kg)
HEIGHT 14.3" (36.32cm)
WIDTH 9.3" (23.62cm)
MOUNTING DEPTH 3.75" (9.5cm)
CUTOUT DIMENSIONS 13" (33.02cm) x 8" (20.32cm)
FINISH White
INSTALLATION KIT IK-650-W (sold serparately)
■Very high sensitivity and power handling
■Pivoting Tractrix Horn compression driver tweeter for clear sound in
any location
■Treble and midbass attenuation switches and IR receiver knock out
■Single piece grille frame and rustproof aluminum grille
www.klipsch.com
1-800-KLIPSCH
All specifications are subject to change without notice. ©2004