Speaker Installation (for New Construction, skip to step #3)
1. Cut the appropriate size opening in the wall or ceiling using
the template provided. If the template is not available, cutout
dimensions are provided on the Klipsch website,
www.klipsch.com. Sizes listed are minimum. If accuracy of cut
cannot be achieved, you may add 1/4" to each dimension. Be
careful not to cut through any existing wiring or plumbing. Avoid
compromising any fire stops between studs.
2. Run speaker wiring (18 gauge minimum) to the openings. Be
sure to comply with all building codes in your area.
3. Attach the wire to the speaker using the wire’s color coding or
markings as a guide to maintain proper polarity.
4.Insert the speaker assembly into the opening and attach by
tightening the four Phillips screws (see illustration). The frame’s
four “dogs” will swivel out and “sandwich” the wall and frame
together as they are tightened. If you use a power tool to tighten
these screws, please use a low torque setting. Failure to do so
could result in damage to your speaker.
5. At this point, you may paint the speaker grille before attaching
it to the speaker. Klipsch grilles are designed to accept most
types of paint. Care should be taken to avoid excessive paint
build-up in the grille perforations.
6. Press the grille into place.
See back page for more illustrations.
Infrared Sensor Mount
All Reference model in-wall speakers feature a 1/2’’ infrared
sensor locator on the baffle.
Limited Lifetime Warranty for Klipsch-Branded
In-Wall, Inceiling and Outdoor Speakers
Klipsch warrants to the original retail purchaser that this product is to
be free from defective materials and workmanship for the life of the
product, if it is properly used and maintained. If this product proves
defective in either material or workmanship, Klipsch, at its option, will
(a) repair the product, or (b) replace the product, at no charge for parts
or labor. If the product model is no longer available and cannot be
repaired effectively or replaced with an identical model, Klipsch at its
sole option may replace the unit with a current model of equal or
greater value. In some cases, modification to the mounting surface may
be required where a new model is substituted. Klipsch assumes no
responsibility or liability for such modification. To obtain a repair or
replacement under the terms of this warranty, please contact our cus-
tomer service group at 1-800-KLIPSCH. You will be required to submit a
copy of the original receipt via fax or email. The receipt must reflect that
you are the original purchaser, the product was bought from an author-
ized Klipsch retailer, and the product is still within warranty. You will be
issued a return authorization number (RA#) and asked to ship the defec-
tive product, together with proof of purchase and RA#, prepaid insured
to the address set forth Klipsch 137 Heampstead #278 Hope, AR
71801. Freight collect shipments will be refused. Risk of loss or dam-
age in transit is to be borne by the purchaser. Once Klipsch receives the
defective product, a repair or replacement order will be initiated.
Limitations:
• This limited warranty does not cover failure of the product
resulting from improper installation, misuse, abuse, accident,
neglect, mishandling, or wear from ordinary use or
environmental deterioration.
• This limited warranty does not cover cosmetic damage,
including paint damage, or consequential damage to other
components or premises which may result for any reason
from the failure of the product.
• This limited warranty is null and void for products not used in
accordance with Klipsch’s instructions.
• This limited warranty is null and void for products with altered
or missing serial numbers and for products not purchased
from an authorized dealer.
• This limited warranty terminates if you sell or otherwise
transfer this product to another party.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS, AND YOU MAY
ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE,
JURISDICTION TO JURISDICTION OR COUNTRY TO COUNTRY. KLIPSCH’S
RESPONSIBILITY FOR MALFUNCTIONS AND DEFECTS IN HARDWARE IS
LIMITED TO REPLACEMENT OR REPAIR AS SET FORTH IN THIS WAR-
RANTY STATEMENT. FOR CANADIAN CUSTOMERS, KLIPSCH DISCLAIMS
ALL OTHER WARRANTIES AND CONDITIONS, EXPRESS OR IMPLIED,
STATUTORY OR OTHERWISE, FOR THE PRODUCT. FOR U.S. CUS-
TOMERS, ALL EXPRESS AND IMPLIED WARRANTIES FOR THE PRODUCT,
INCLUDING BUT NOT LIMITED TO ANY IMPLIED WARRANTIES OF MER-
CHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE LIMIT-
ED IN TIME TO THE TERM OF THIS WARRANTY. SOME STATES, JURIS-
DICTIONS OR COUNTRIES DO NOT ALLOW THE EXCLUSION OF CERTAIN
IMPLIED WARRANTIES OR CONDITIONS, OR LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY OR CONDITIONS LASTS, SO THIS LIMI-
TATION MAY NOT APPLY TO YOU. KLIPSCH DOES NOT ACCEPT LIABILI-
TY FOR SPECIAL, INDIRECT, CONSEQUENTIAL OR INCIDENTAL DAM-
AGES, INCLUDING WITHOUT LIMITATION, ANY LIABILITY FOR THIRD
PARTY CLAIMS AGAINST YOU FOR DAMAGES OR FOR PRODUCTS NOT
BEING AVAILABLE FOR USE. THE MAXIMUM LIABILITY FOR WHICH KLIP-
SCH MAY BE RESPONSIBLE WILL BE NO MORE THAN THE AMOUNT
YOU PAID FOR THE PRODUCT THAT IS THE SUBJECT OF THE CLAIM.
SOME STATES, JURISDICTIONS OR COUNTRIES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF SPECIAL, INDIRECT, INCIDENTAL OR
CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATION OR EXCLU-
SION MAY NOT APPLY TO YOU.
Warranty Outside the U.S. and Canada
The Warranty on this product if it is sold to a consumer outside of the
United States and Canada shall comply with applicable law. To obtain
any applicable warranty service, please contact the dealer from which
you purchased this product, or the distributor that supplied this product.
