
®
Headset Microphone Instructions
Thank you for purchasing from www.KnowBrainer.com (615) 884-4558
If you are using a Mac computer you MUST additionally use a USB soundcard. If you
are using a PC, the use of a USB soundcard is strongly recommended because
integrated soundcards tend to be substantially less accurate. If you already own a
high-quality soundcard, insert the microphone plug (typically labeled with a
microphone icon and/or colored red/pink) into your soundcard at this time. If you
additionally purchased a USB soundcard or USB microphone, a KnowBrainer
associate may have already attached your USB adapter to your microphone (because
they are required to include these types of amenities). If you purchased a USB
adapter (soundcard) or USB microphone you will need to plug the adapter into a USB
port before launching your speech recognition application. All KnowBrainer USB
soundcards are plug-and-play (no installation CD required). If you are using a
notebook computer, plug your USB soundcard into any available USB port. On
desktop computers, we only recommend using a rear USB port. NEVER use USB
hubs, splitters, front or side USB ports because they are not properly shielded. Before
using your new microphone, you must run an Audio Check. The following step-by-
step process is for NaturallySpeaking 13. Do not skip this step! We randomly dispatch
KnowBrainer field agents to check on our customers.
>>> Continued on the next page <<<
WARNING!
You Must Run the DNS Check Microphone
Before using any new microphone