
About Sy bol
A variety of sy bols are used in this Cautions for Safety and your products to guide you to use products in a right
and safe anner and to prevent possible risks for users and other persons and da ages to their property.
The eaning of each sy bol is as follows. After fully aware of eaning of each sy bol, read the following cautions.
This sy bol eans that wrong handling or ignorance of atters that this sy bol indicates
ay cause serious injury or even death of user.
This sy bol eans that wrong handling or ignorance of atters that this sy bol indicates
ay cause serious injury or property da age of user.
This sy bol eans the atter that user should not do at nay event.
This sy bol eans that user should follow the instructions.
Infrared LED Day & Night Ca era (KCC-IR10)
■Features
�1/3 inch SONY Super HAD CCD.
�Mini u Illu ination responses down to 1.0Lux for color and under 0Lux for infrared Lighting.
�Digital signal processing (DSP) allows better picture quality.
�330TV lines resolution produce crystal clear i ages.
�Back light co pensation.
�CDS Auto switching infrared LED.
�High Sensitivity, Low S ear, high Anti-Bloo ing.
�IR precision Lens Mounted.
�10 Infrared LED (Visibility Range 5 at f:6 ).
�Water proof.
■Specifications
Description KCC-IR10
I age Sensor
Effective Pixels
Scanning Syste
Sync Syste
Resolution
Video Output
S/N ratio
Mini u Illu ination
Visibility Range
Ga a
White Balance
Lens Mount
Shutter Speed
Operation Te perature
Hu idity
Power Consu ption
Weight
1/3 inch SONY SUPER HAD CCD
510 (H) ×492 (V)
NTSC standard 525 lines
500 (H) ×582 (V)
PAL standard 625 lines
Internal
330 TV Line
VBS 1.0V p-p Co posite (75Ω)
More then 48dB (AGG/Off)
1.0Lux (F=2.0), Under 0.000Lux infrared Lighting on condition
10 Unit infrared LED (850n ) : 5
r = 0.45
Auto atic White Balance
f:6 F=2.0 (Standard), 4 , 12 F=2.0 (Optional)
1/60 ~ 1/100,000sec 1/50 ~ 1/100,000sec
-10℃~ 50℃
Within 90% RH
DC 12V ±10% (Max 1.4Watts, 2Watts with IR LED)
Approx : 232g
KCC-IR10
■Mounting
■Di ension ■Co ponent
Warnings
Cautions
�Bracket
�Screws for fixing
Caution : Please Use Regulated 12V DC / 1.5A Power Supply