Kodak M820 - EASYSHARE Digital Frame User manual

Kodak
EasyShare
M820/M1020
Digital Frame ·Cadre numerique
Marco
digital ·Porta-retrato digital
User's guide
Guide d'utilisation
Guia del usuario
Guia do Usuario

See the extended user guide - for more information about using your frame, visit
www.kodak.com/go/digitalframesupport. See the frame package for package contents.
www.kodak.com/go/digitalframesupport 1
1 Audio In
2 Audio Out n
3 DC-In (12V) ~
1 LCD screen
2 Touch border (Tap/Slide)
3 Touch border (Tap only)
4 Touch-sensitive raised guide
NOTE: When screen icons appear,
LED lights turn on at touch-sensitive
points along the raised guide.
_____ ~ ~-""':;::;:-~HJ-~ 4 To use the touch border,
see page 7.
2
Back/Right View
Front View

Back/Side View
1 On/Off button 6
2
Wall mounting holes (see page 8) 7
3
Rotating/extending stand 8
4
Memory card slot - SD, MMe, MS, xD 9
5
Volume button
2
Memory card slot - CF, MD
USB connector (to camera/USB device)
USB connector (to computer)
Speakers
www.kodak.com/go/easysharecenter

Getting started
Setting up your picture frame
Changing the frame orientation
Your frame is set up to display pictures in landscape orientation II=:JI. You can turn the
stand to change it to portrait [0] but you must also change the setting (see page 8).
Change the stand position:
• Turn the stand 90° to change the orientation.
• Pull the stand out to adjust the frame angle.
wwwkodak.com/go/digitalframesupport ®3

Getting started
------, ---------------------
Attaching the power cable
A CAUTION:
Do not use this power cable with other devices, including digital
cameras.
Your power cable may look different from
the one pictured. Use the plug that
accommodates your type of power outlet.
Turning on your frame
On/Off button
.----
I
,
,
I
I"
I'
.in]
[e-mail]/go/easysharecenter

Getting started
Setting your language
~n
-
~r:1
-
n _
............... ~.~ •.. ~ ... _,
I . I
~
¥
, t
1
The language screen appears the first time you turn on your frame.
Using the touch border (see page 7):
• Slide to find your language, then tap OK.
To change the language at a later time:
• Tap iJ (Home) ~ lQJ (Settings) ~ Language.
The language screen appears.
Slide to find your language, then tap OK.
Enjoying your pictures immediately!
• To view your pictures or playa slide show,
insert a memory card, or connect a camera or other
USB device (see page 6).
If your frame has preloaded sample pictures, a slide
show starts automatically.
If you are at the Home screen, see page 10 to start
your slide show.
To change the slide show order, see page 12.
wwvv. kodak.com/go/digita/framesupport @5

Getting started
Inserting a memory card
To insert a card, push the card firmly into
the slot until it stops.
To remove a card from:
top card slot - push in the card to release it
side card slot -pullout the card
CAUTION: Do not insert a micro or
mini memory card without an adapter.
Secure Digital
MultiMedia Card
Memory Stick ..
xD
;\ Compact Flash
I MicroDrive
connecting adigital camera or other USB device
USB devices: camera, flash
drive, card reader, computer,
etc. (sold separately)
USB cable to computer
sold separately
USB cable included
with your USB device
6
www kodak.com/go/easysharecenter

Getting started
Using your frame's touch border
Touch along the raised guide at the bottom (tap/slide) or right (tap only) border to
find/highlight menu items or pictures/videos. Press OK to select them.
NOTE: The screen is not touch-sensitive. Do not touch.
A CAUTION:
Only use your finger to touch the border. Using sharp or metal
objects may damage the border or screen.
On the raised guide:
• Tap at bottom or right to
find/highlight menu items,
pictures, videos, etc.
• Slide along bottom to
find/highlight selections quickly.
Sliding right to left during a slide
show quickly scrolls forward
through your pictures. Slide left to
right to reverse
• Touch, hold for 2 seconds, then
slide along bottom to move quickly
through numerous images
Iil- Home
f---+- (il- Slide show
,or[i
Close
NOTE: When screen icons appear, LEDs turn on
at touch-sensitive points along the raised guide.
Tap Menu or More for more options, or tap ~
to resume a slide show. ~
If the icons disappear, tap the touch border.
www kodak.com/go/digitalframesupport 7

Getting started
Mounting your frame on the wall
Use wall-anchoring hardware (not included) to anchor your frame securely to your wall.
Clip (use to reroute, secure, and center
the power cable)
Power cable
To change to portrait [0], turn your frame 90
0
and use
the wall mounting holes at the top.
Changing the frame orientation setting
Change the frame orientation setting if you change to portrait [0] orientation.
1 Tap (iJ (Home) ~ I;Ql (Settings).
2 Select Ii) (Viewing options), then tap OK. Select Frame orientation, then tap OK.
Select Portrait, then tap OK.
3 Tap [iJ to exit.
8wwwkodak.com/go/easysharecenter

Doing more with your frame
,~ .....,
...,.. ..... 1 ~""'" l"''''' -... _
El ~ PJ ~ nD _ .. ~ ~
-----_.~
Accessing your pictures
Tap Home to access pictures/videos from all connected devices (see page 6). Use the
touch border to make your selections (see page 7).
1 Tap 1iJ (Home), then iii (Pictures and Videos).
All connected sources and the Settings icon are
displayed.
"',*..,~-,.. 2 Slide to highlight a picture source, then:
• Tap iii (Slide show) to start a slide show.
OR
• Tap OK to view thumbnails.
Picture source icons:
•..
.. ;""',.,"
~ ":
~
~
liil
My Frame-the frame's 128 Mb internal memory. Copy your pictures into My Frame
from a memory card or other device (page 19).
Memory card-appears when you insert a card (page 6). The label and icon indicate
the type of card.
Camera-appears when you connect a digital camera via USB cable (page 6).
USB drive-appears when you insert a USB flash drive (page 6).
wwwkodak.com/go/digitalframesupport 9

Doing more with your frame
Settings-customize your frame settings. For example; set slide show durations and
transitions, set viewing options, screen brightness, clock, and timer. See the extended
user guide at www.kodak.com/go/digitalframesupport.
My Slide show-appears when you save a slide show you are viewing as your
favorite (see page 12).
Viewing your pictures
Playing a slide show
There are three ways to start a slide show on your frame:
• Insert a memory card or USB device, then turn on the frame.
• Turn on the frame, then insert a card or connect a USB device-a new slide show
starts automatically, replacing a currently running slide show or single view picture.
NOTE: Music plays automatically when a memory card or USB device with music on it is connected.
• Select a picture in thumbnails view (page 11), or select a picture source on the
Pictures and Videos screen, then tap [iJ (Slide show). See page 7 to scroll
forward/backward quickly.
NOTE: A slide show plays continuously until you stop it or turn off the frame.
10 ®www.kodak.com/go/easysharecenter

Doing more with your frame
Viewing thumbnails
There are two ways to view your pictures as thumbnails:
• Tap lil (Home). Tap iJ (Pictures and Videos),
select a picture source (see page 9), then tap OK.
OR
• From a slide show or single view, tap liJ (Menu),
then iii (Multi-up).
NOTE: If the screen icons are unavailable, tap the touch border.
To navigate through the thumbnails, slide your finger left/right along the bottom touch
border. Touch and hold until the screen changes (about 3 seconds) to move even faster
through the thumbnails.
Viewing a single picture
• To view a single, full-screen picture, highlight it in thumbnails view, then tap OK.
• To magnify a picture up to 8X, tap liJ (Menu), then tap ~ (Zoom) repeatedly.
To view other parts of the picture, tap £ .. 'J"' To return to 1X size, tap ~ (Zoom)
repeatedly. ..
• To rotate a picture, tap li1 (Menu), then tap lQJ (Rotate).
wwwkodak. com/go/digitalframesupport @
11

Doing more with your frame
Viewing pictures by date or filename
By default, the pictures and videos on your frame are arranged and played by date,
starting with the oldest. You can play the arrangement or order, by date, or
alphabetically by filename.
To change the sort order:
1 Select a picture source (for example, a folder with pictures), or multiple pictures
(see page 17).
2 Tap lil (Menu).
3 Highlight Sort, then tap OK.
4 Select a sort order:
- Date, oldest to newest (default)
- Date, newest to oldest
- Filename, A - Z
-
Filename, Z- A
5
Tap OK.
Saving your favorite slide show for easy access
While viewing the slide show:
• Tap 1iJ (Viewing Options), then Save as My Slideshow. Tap Yes to confirm.
NOTE: The saved slide show appears on the Pictures and Videos screen as a picture source (see page 10).
12 @
www kodak.com/go/easysharecenter

Doing more with your frame
Playing music only
1 Tap the touch border to pause your slide show and to
display the screen icons.
2 Tap [jJ (Home), then ~ (Music) to view music
sources.
3 Slide to the right/left to move up/down the music
--'-"----=:=! source list, then tap OK.
4 Slide right/left to go to the previous/next song, or select Play all songs, then tap OK.
Your music starts playing.
5 Tap iii (Slide show) to return to your picture or slide show.
NOTE: Music plays automatically when a memory card or USB device with music on it is connected.
Notes on playing, copying, deleting music:
• A headphone jack is available on the side of the frame (page 1).
• Adjust the volume with the Volume button (page 2).
• To copy or delete music files (MP3), slide to highlight the songs in the music source,
then tap OK. Tap ~ (Menu) ~ Copy or Delete ~ OK.
- For copying, highlight the source you want to copy to, then tap OK
- For deleting, tap Yes to confirm.
wwwkodak.com/go/digita/framesupport @
13

Doing more with your frame
Playing a video
• During a slide show, videos play automatically. When the video ends, the slide show
resumes. To playa video from thumbnails view, highlight a video thumbnail, then
tap OK.
• Videos in thumbnail view:
- MOV videos are indicated with iii.
- AVI, MPEG, and MPG videos display the first frame.
• Video control buttons:
ctJ
play, pause, and resume the video.
~/~
rewind I fast forward.
~or[iJ
stop the video and return to thumbnails.
14 @www.kodak.com/go/easysharecenter

Doing more with your frame
Copying pictures
Copy pictures/videos from your current viewing location to other connected devices
(see page 6).
A CAUTION:
Removing a card or disconnecting a device while copying may
damage your card, pictures, or device.
1 Highlight a picture to copy:
In thumbnails view, slide your finger along the
bottom touch border to find a picture; or, display a
picture in single view.
2 Tap W (Menu).
3 Tap ~ (Copy), then OK.
4 Tap the destination you want to copy to, then tap OK.
The picture is copied.
5 Tap;jJ (Close) to close the menu.
To copy multiple pictures, see page 17.
www.kodak.com/go/digitalframesupport @
15

Doing more with your frame
Deleting pictures
A CAUTION:
Removing a card or disconnecting a device while deleting may
damage your card, pictures, or device.
,,"'.- 1 Highlight a picture to delete:
In thumbnails view, slide your finger along the
bottom touch border to find a picture; or, display a
picture in single view.
2 Tap ~ (Menu).
3 Tap IiJ (Delete), then tap OK.
4 Tap Yes to confirm.
The picture is deleted
5 Tap ~ (Close) to close the menu.
To delete multiple pictures, see page 17.
16 @
wwvv. kodak.com/go/easysharecenter

Doing more with your frame
Selecting multiple pictures
Use the multi-select feature to copy or delete two or more pictures; or to playa slide
show of selected pictures.
1 In thumbnails view, slide along the bottom touch border to find a picture, then
tap ~ to select it.
A check mark appears on the selected picture.
2 Continue selecting pictures.
To remove a check mark, tap ~ again.
Selecting/Unselecting all
__ ._.... Select all
1 Tap ~ (Menu) whenever pictures are displayed
(slide show, thumbnails view, single picture).
2 Tap Select All.
=== A confirmation screen appears, then your picture display
reappears A check mark is displayed on all pictures in
your current location.
Unselect all
• To remove all check marks, choose Unselect All.
A confirmation screen appears, then your picture display
reappears. All check marks are removed.
www.kodak.com/go/digitalframesupport ®
17

Doing more with your frame
Printing pictures
1 Make sure your frame is disconnected from the
printer (Pictbridge enabled).
2 On the frame, change your connection mode to
Printer by tapping [i] (Home) ~ ~ (Settings) ~
Device configuration ~ USB connection mode.
3 Turn off the frame and printer.
4 Connect the USB cable from the frame to the printer.
S Turn on the frame and printer.
6 In slide show or single view, tap W (Menu), then ~ (Print).
In thumbnails view, see page 17 to print multiple pictures.
NOTE: Remember to change your connection mode back to Computer when you are done.
18 @www.kodak.com/go/easysharecenter

Doing more with your frame
Copying from your computer
Use the Kodak EasyShare digital display software to drag and drop pictures easily from
your computer to a memory card (or other removable USB device). Insert the card into
your frame and playa slide show right away (see page 5).
Insert the CD into your computer and follow the
on-screen instructions to install the software.
NOTE: Clicking Complete installs both the Kodak EasyShare software
and the Kodak digital display software. Both applications work
together to ensure the best experience when working with your
pictures, videos, music, frame and connected devices.
Both software icons appear on your desktop.
2 Double-click 1c~1 (Kodak EasyShare digital display
icon) to start using the software.
~~~,
l ~..l.'.)
~-,
CD packaged filal
with your frame. "L.!
Installing the software
1
Using the Kodak EasyShare digital display software
The Kodak EasyShare digital display software makes it easy for your frame to
communicate with other connected devices.
Copy-drag and drop your pictures, videos, and music:
• to and from your computer to your frame via a USB cable (sold separately)
• to and from your computer to a memory card, then insert it in your frame
www.kodak.com/go/digita/framesupport @
19