Kodak OLED Wireless Frame User manual

www.kodak.com/go/digitalframesupport 1
ENGLISH
Front View
NOTE: When you turn on the frame or tap the Quick Touch Borders, the screen icons appear and LED lights
turn on at touch-sensitive points along the Quick Touch Borders.
To use the Quick Touch Borders , see page 4.
1 OLED screen 4 LED lights
2 Quick Touch Border
(right side, tap only)
5 Memory card slot - SD, SDHC, MMC, MS, xD
3 Quick Touch Border
(bottom, tap and slide)
See the Extended user guide www.kodak.com/go/digitalframesupport
2
1
35
4
4

2www.kodak.com/go/easysharecenter
Back/Side View
1 USB connector (to computer) 5 DC-In (12V)
2 USB connector (to camera/USB device) 6 Volume
3 Audio In 7 Power
4 Audio Out 8 Speakers
567
8
4
1
2
3

www.kodak.com/go/digitalframesupport 3
1Getting started
Attaching the power cable
Turning on your frame
Your power cable may look different from
the one pictured. Use the plug that
accommodates your type of power outlet.
Power button- press and hold for 2
seconds, then release.

Getting started
4www.kodak.com/go/easysharecenter
Using your frame’s Quick Touch Borders
** Tap below arrows to move the highlight
Done
Close
IMPORTANT: The screen is not touch-sensitive. Do not touch it.
Tap the light
closest to a button
to select it.
Touch tips
Home
Play slide show
*Quick Touch
Tap and slide on the Quick
Touch Borders* only.
Tap lights
below buttons
Slide on
bottom border
only
Slide to highlight
menus, pictures,
videos, options.**
Tap OK to select
them.
Slide to scroll:
Scroll through images—Like turning the pages of a book, slide left ←to go forward, slide right →to go back. For
faster scrolling through larger numbers of pictures, touch and hold (3 seconds), then slide to the end of the border.
Scroll through menus—Slide right →to scroll down, slide left ←to scroll up.
Borders
Tap lights next to
buttons
Don’t hover,
borders can be
sensitive.
(No sliding here)
Tap a border to
display the icons.
Tap Close to
dismiss them. OK
Only use your finger to touch the borders. The borders do not react to sharp or
metal objects and they may damage the border or screen.
one picture, menu, or item at a time.

Getting started
www.kodak.com/go/digitalframesupport 5
Setting your language
The language screen appears the first time you turn on your frame.
■Slide (or tap below slider arrows) on the bottom
border to highlight your language, then tap Save.
NOTE: Slide left/right on the lights to move up or down the list.
To change the language at a later time:
■Tap (Home) → (Settings) → Language.
The language screen appears.
Slide to highlight your language, then tap Save.
Connecting to your wireless network
After you set your language, your frame scans for available wireless networks. See
Connecting to your wireless network, page 7.
Enjoying your pictures immediately!
■To view your pictures or play a slide show,
insert a memory card, or connect a camera or other
USB device (see page 6). Your pictures play
automatically.
If your frame has preloaded sample pictures, they
start playing automatically.
Slider arrows
Save

Getting started
6www.kodak.com/go/easysharecenter
Inserting a memory card
Connecting a digital camera or other USB device
xD
MultiMedia Card
Secure Digital
Memory Stick
■To insert a card, push the card firmly
into the slot until it stops.
■To remove a card, push in the card to
release it.
Do not insert a micro or mini
memory card without an
adapter.
IMPORTANT:
USB cable included
with your USB device
USB devices: camera, flash drive, card
reader, etc. (sold separately)

www.kodak.com/go/digitalframesupport 7
2Setting up for wireless
operation
If you have problems with your wireless setup or connection, see
Troubleshooting starting on page 22. Or open KODAK EASYSHARE Digital Display
Software on your computer (see page 11) and click Tools → Wireless Troubleshooter.
Follow the automated troubleshooting wizard.
Connecting to your wireless network
To allow your frame to access the contents of your computer wirelessly, connect your
frame to your wireless home network.
NOTE: If you are not sure you have a wireless network, ask the person who set up your computer.
1First time—If this is the first time you turned on your frame, tap OK after you set
your language (page 5).
The Scanning for available wireless networks screen appears.

Setting up for wireless operation
8www.kodak.com/go/easysharecenter
Available wireless networks are listed.
Tap Back to dismiss the screen and connect later.
Later—To connect later, tap Home →Settings → Network → Scan for
wireless networks. Then follow the screen prompts and continue with step 2below.
If your wireless network is not found, select Scan again. You may need to enter the
network SSID (sometimes called the network name) manually. The person who set
up your network can help you with this information. Or, tap Help me connect for
more information.
2With your home network highlighted, tap OK to connect to your home network.
The Connecting screen appears.
Or, select Exit without connecting and go to the Home screen (page 14).
If you do not have security enabled, go to step 3.
Enter security key (if you have security enabled)
If you have wireless network security enabled, you are prompted to enter your
NOTE:
If the scan finds multiple networks,
your home network (with the highest
% signal strength) is usually listed
first and highlighted.
Or, to select another network, slide or
tap below the arrows to highlight a
network, then tap OK.

Setting up for wireless operation
www.kodak.com/go/digitalframesupport 9
security key (WEP or WPA) on the on-screen keyboard. Slide along the bottom of the
touch border (or tap below slider arrows) to highlight a character then tap
(Select) to enter it in the text box. Tap Done when finished.
NOTE: The screen identifies your security as either WEP or WPA .
A
WEP security key can be either:
5 or 13 characters (0-9, A-Z, some special characters, case sensitive),
10 or 26 characters (0-9, A-F, not case sensitive).
A
WPA key is 8-63 characters, case sensitive.
The person who set up your network can provide you with this information.
Congratulations! You have successfully connected to your network. Return to this
screen later to verify your network and frame connections. See page 13.
3If you haven’t done so already, install KODAK EASYSHARE Digital Display Software
(see page 10) so your frame can display wireless content properly.
Slider arrows
Backspace - erases text
Keep sliding (or tapping
arrows) left/right to go to the
previous or next row.
Select
Text box
Navigation tip:

Setting up for wireless operation
10 www.kodak.com/go/easysharecenter
Installing the software
The CD that was packaged with your frame contains two applications that work well
independently, but also work together for the best experience with your frame:
■KODAK EASYSHARE Digital Display Software —manage your frame, copy
between your frame and computer, and set up your frame for access to KODAK
Gallery and Web content (page 12).
■KODAK EASYSHARE Software —organize, edit, and share your pictures.
IMPORTANT:
We recommend that you install both. If you already have EASYSHARE
Software on your computer, upgrade to this special version for additional
features.
1Insert the CD into your computer.
2Follow the on-screen instructions to install the
software.
■Click Typical to install EASYSHARE Digital Display
Software and to update a previous version of
EASYSHARE Software.
■If you do not have a previous version of
EASYSHARE Software on your computer, you can
click Custom and choose both applications for a
new installation.
The software icons appear on your desktop when the
installation is complete.
CD packaged
with your frame.