Kodak P520 EASYSHARE User manual

www.kodak.com/go/digitalframesupport 1
ENGLISH
See the extended user guide – for more information about using your frame, visit
www.kodak.com/go/digitalframesupport. See the frame package for package contents.
Front View
2
1
3
1 LCD screen
2 Quick Touch Border (right side, tap only)
3 Quick Touch Border (bottom, tap/slide)
To use the Quick Touch Borders,
see page 5.
Kodak EasyShare P520 digital frame
Kodak EasyShare P720/P725/P820 digital frames
2
1
3

2www.kodak.com/go/easysharecenter
Back/Side View
1 On/Off button 5 Reset button
2 Stand attachment slot 6 Wall mounting holes, 3 (see page 10)
3 Frame stand (see page 3) 7 USB connector (to camera/USB device)
4 Memory card slot - SD, MS, xD, MMC 8 Memory card slot - SD/SDHC
9 Power connector
45
7
8
3
1
2
P820 digital frame
6
45
7
8
3
1
2
6
P520/P720/P725 digital frames 9
9

www.kodak.com/go/digitalframesupport 3
1Getting started
Setting up your picture frame
Attaching the frame stand
■Make sure the tab on the stand is secure in the slot
on the back of the frame.
■Your frame displays pictures in landscape
orientation. To change to portrait , see page 9.
Attaching the power cable
CAUTION:
Do not use this power cable with other devices, including digital
cameras.
Tab
Slot
Your power cable may look different from
the one pictured. Use the plug that
accommodates your type of power outlet.

Getting started
4www.kodak.com/go/easysharecenter
Turning on your frame
Setting your language
The language screen appears the first time you turn on your frame.
■Slide, or tap below small arrows, to highlight your
language, then tap Save.
To change the language at a later time:
■Tap (Home) → (Settings), then highlight
Language.
The language screen appears.
Highlight your language, then tap Save.
To use the Quick Touch Borders, see page 5.
Power button
Save
Slide
Tap below small arrows

Getting started
www.kodak.com/go/digitalframesupport 5
Using your frame’s Quick Touch Borders
Tap next to or
below a button to
select it.
Tap a border to
display the icons.
Tap (Close) to
dismiss them.
Touch tips
Home
Play Slide show
Close
*Quick Touch
OK
Done
Tap and slide on the Quick
Touch Borders* only.
Tap below buttons
Slide on bottom
border only
Slide to highlight
menus, pictures,
videos, options.**
Tap OK to select
them.
Slide to scroll:
Scroll through images—Like turning the pages of a book, slide left ←to go forward, slide right →to go back. For
faster scrolling through larger numbers of pictures, touch and hold (3 seconds), then slide to the end of the border.
Scroll through menus—Slide right →to scroll down, slide left ←to scroll up.
Borders
** Tap below small arrows at the ends of the scroll bar to move the highlight one picture, menu, or item at a time.
Tap next to buttons
No slide here
Important:The screen is not touch-sensitive. Do not touch it.
Only use your finger to touch the borders. Sharp or metal objects may damage the border or screen
Don’t hover,
borders can be
sensitive.

Getting started
6www.kodak.com/go/easysharecenter
Enjoying your pictures immediately!
■To view your pictures or play a slide show,
insert a memory card, or connect a camera or other
USB device (see page 8).
If you are at the Home screen, see page 12 to start
your slide show.
To change the slide show order, see page 13.

Getting started
www.kodak.com/go/digitalframesupport 7
Inserting a memory card
■To insert a card, push the card firmly into the slot until it stops.
■To remove a card from:
– top card slot, push in the card to release it.
– side card slot, pull out the card.
IMPORTANT:
Do not insert a micro or mini memory card without an adapter.
MultiMedia Card
SD/SDHC
Memory Stick
xD
SD/SDHC
P520/P720/P725 digital frame P820 digital frame

Getting started
8www.kodak.com/go/easysharecenter
Connecting a digital camera or other USB device
P520/P720/P725 digital frame
P820 digital frame
USB cable
included with
your USB device
USB devices include a camera, flash drive, card reader, etc. (sold separately)

Getting started
www.kodak.com/go/digitalframesupport 9
Turning off your frame
■Standby mode—Press the power button .
■Power off—Unplug the power cable.
Changing your frame orientation
Your frame is set up to display pictures in landscape orientation. You can turn the
stand to change it to portrait but you must also change the setting.
Change the stand position: Remove the stand, turn
it 90 °, and replace as shown.
Change the setting:
1Tap (Home)
→ (Settings).
2Slide to highlight Set viewing options, then tap OK.
Slide to highlight Frame orientation, then tap OK.
Slide to highlight Portrait, then tap OK.
3Tap (Back) to exit.

Getting started
10 www.kodak.com/go/easysharecenter
Mounting your frame on the wall
Use wall-anchoring hardware (not included) to mount your frame securely to your wall.
To change to portrait orientation ,
turn your frame 90°and use the wall
mounting holes at the top.
Wall mounting holes
(on back of frame)
Secure power cable
with attached clip

www.kodak.com/go/digitalframesupport 11
2Doing more with your frame
Accessing your pictures
Tap Home to access pictures from your memory card and all connected devices (see
page 8). Use the Quick Touch Borders to make your selections
( see page 5 ) .
1Tap (Home).
All connected sources and the Settings icon are
displayed.
2Slide to highlight a picture source, then:
■Tap (Play Slide show) to start a slide show.
OR
■Tap OK to view thumbnails.
Picture source icons:
Memory card—appears when you insert a card (page 7). The label and icon indicate
the type of card.
Camera—appears when you connect a digital camera via USB cable (page 8).
USB drive—appears when you insert a USB card reader or flash drive (page 8).
Settings—customize your frame settings. For example: set slide show options like
durations and transitions; set screen brightness, clock, and timer. See the extended
user guide at www.kodak.com/go/digitalframesupport.

Doing more with your frame
12 www.kodak.com/go/easysharecenter
Viewing your pictures
Playing a slide show
There are three ways to start a slide show on your frame:
■Insert a memory card or USB device, then turn on the frame.
■Turn on the frame, then insert a card or connect a USB device—a new slide show
starts automatically, replacing a currently running slide show or single view picture.
■Highlight a picture in thumbnails view or highlight a picture source on the Home
screen, then tap (Play Slide show).
NOTE: A slide show plays continuously until you stop it or turn off the frame.
If a slide show is running and the screen icons are unavailable, tap the touch border. Tap (Close)
to hide the icons.
Viewing thumbnails
There are two ways to view your pictures as thumbnails:
■Tap (Home). Slide to highlight a picture source
(see page 11), then tap OK.
OR
■From a slide show or single view, tap
(Thumbnails).
NOTE: If the screen icons are unavailable, tap the touch border.

Doing more with your frame
www.kodak.com/go/digitalframesupport 13
There are 3 ways to navigate through the thumbnails:
■Tap below the arrows at the ends of the scroll bar to move the highlight one picture
at a time.
■Slide your finger left/right along the bottom touch border.
■Touch and hold until the screen changes (about 3 seconds) to move even faster
through a large number of thumbnails.
Viewing a single picture
■To view a single, full-screen picture, highlight it in thumbnails view, then tap OK.
To turn off the buttons and other screen text, tap (Close).
■To magnify a picture up to 8X, tap (Actions), tap (Zoom), then tap the
plus (+) button. To view other parts of the magnified picture, tap the arrows. To
return to 1X size, tap the minus (-) button; for P520 frame, continue tapping (+).
NOTE: Depending on picture size, full magnification may be less than 8X.
■To rotate a picture, tap (Actions), then tap (Rotate).
Viewing pictures by date or filename
By default, the pictures on your frame are arranged and played by date, starting with
the oldest. You can change the arrangement or order, by date, or alphabetically by
filename.
To change the sort order:
1For P720/P725 or P820 frames—display thumbnails (see page 12), then tap

Doing more with your frame
14 www.kodak.com/go/easysharecenter
(Slide show options).
For P520 digital frame—tap (Home), then (Settings).
2Highlight Sort, then tap Select.
3Select a sort order, as follows. Then tap OK or Save.
– Filename, A - Z
– Filename, Z - A
– Date, oldest to newest (default)
– Date, newest to oldest
Copying pictures
Copy pictures from your current viewing location to other connected devices ( page 8).
CAUTION:
Removing a card or disconnecting a device while copying may
damage your card, pictures, or device.
1Highlight a picture to copy:
In thumbnails view, slide your finger along the slider
area to find a picture; or, display a picture in single
view.
2Tap (Actions).

Doing more with your frame
www.kodak.com/go/digitalframesupport 15
3Tap (Copy).
Your connected devices appear.
4Tap the device you want to copy to, then tap OK.
The picture is copied.
5Tap (Close) to close the menu.
To copy multiple pictures, see page 16.
Deleting pictures
CAUTION:
Removing a card or disconnecting a device while deleting may
damage your card, pictures, or device.
1Highlight a picture in thumbnails view or display a
picture in single view.
2Tap (Actions).
3Tap (Delete), then tap Yes to confirm.
The highlighted or displayed picture is deleted.
4Tap (Close) to close the menu.
To delete multiple pictures, see page 16.
Connected devices

Doing more with your frame
16 www.kodak.com/go/easysharecenter
Selecting multiple pictures
Use the multi-select feature to:
■copy or delete two or more pictures
■play a slide show of selected pictures
Selecting individual pictures
1In thumbnails view, touch and slide to highlight a picture, then tap (Select).
A check mark appears on the selected picture.
2Continue selecting pictures.
To remove a check mark, highlight a picture, then tap Unselect.
Tip: To remove all check marks at once, tap Select All, then tap Unselect All.
Selecting/Unselecting all
Select all
■Tap (Select All) from thumbnails view (or your
current location).
Unselect all
■To remove all check marks, tap Unselect All.
Select/Unselect All

Doing more with your frame
www.kodak.com/go/digitalframesupport 17
Copying from your computer
Use Kodak EasyShare digital display software to drag and drop pictures easily from your
computer to a memory card (or other removable USB device). Insert the card into your
frame and play a slide show right away (see page 8).
The CD that was packaged with your frame contains two applications that work well
independently, but also work together for the best experience with your frame:
■Kodak EasyShare digital display software —
manage your frame, orgainize your pictures and
videos, and copy between your frame and computer.
■Kodak EasyShare software —organize, edit, and
share your pictures.
Installing Kodak EasyShare digital display software
■Insert the CD into your computer and follow the on-screen instructions to install the
software.
NOTE: Click Typical to install EasyShare digital display software and to update a previous version of
EasyShare software. If you do not have a previous version of EasyShare software on your
computer, you can click Custom and choose both applications for a new installation.
The software icons appear on your desktop when the installation is complete.
When prompted, take a few minutes to electronically register your frame and software
for exclusive tips and offers. To register later, visit www.kodak.com/go/register.
CD packaged
with your frame.

Doing more with your frame
18 www.kodak.com/go/easysharecenter
Copying with EasyShare digital display software
1On your computer’s desktop, double-click (Kodak EasyShare digital display
software) to start using the software.
2Insert a memory card into your computer or card reader. Or insert a removable USB
device into the computer’s USB port.
3Click Drag & Drop Zone to see the card or USB device.
4In Pictures & Videos, click the folder or location on your computer that contains the
pictures you want to copy.
5In the Viewer pane, select the pictures, then drag and drop them to the card or USB
device in the Drag & Drop Zone.
6Remove the card from your computer and insert it into your frame card slot or a
connected card reader.
A slide show begins.
NOTE: To maintain the slide show order during playback, see page 13 and select Filename, A - Z.
For more information on the features included in EasyShare digital display software,
click the Help button in the software.

Doing more with your frame
www.kodak.com/go/digitalframesupport 19
Customizing your frame
For a custom look, remove the adhesive matte (included) from its liner, align it carefully,
then attach it to your frame.
Maintaining your frame and mattes
IMPORTANT: Always disconnect the power before cleaning. Do not use water, cleaning
solutions, or other adhesives on the frame or any of its parts.
Gently wipe the frame, LCD, or matte with a clean, dry cloth (included). For
fingerprints on the frame, apply light pressure.
You can reapply the matte to your frame several times.
When you are not using the matte, reapply it to the liner and
store in a plastic bag to keep the adhesive backing clean.

Doing more with your frame
20 www.kodak.com/go/easysharecenter
Resetting factory defaults
1Make sure the power cable is connected and the
frame is turned on.
2Insert a small sharp object into the reset button slot
and press the recessed reset button.
When the reset is successful, the set language screen
appears.
All settings return to the original factory defaults.
3Reset your language. See page 4.
Learning more about your frame
Reset button
slot
www.kodak.com/go/digitalframes Frame accessories, including decorative faceplates
and custom mattes
www.kodak.com/go/digitalframesupport Extended user guide
Interactive troubleshooting and repairs
Interactive tutorials
FAQs
Downloads
Product registration