Kodak P720 - EASYSHARE Digital Frame User manual

www.kodak.com/go/digitalframesupport 1
ENGLISH
See the extended user guide – for more information about using your frame, visit
www.kodak.com/go/digitalframesupport. See the frame package for package contents.
Front View
ack/Side View
1 On/Off button 5 Reset button
2 Stand attachment slot 6 US connector (to camera/US device)
3 Frame stand (see page 2) 7 Memory card slot - SD/SDHC
4 Memory card slot - SD, MS, xD, MMC 8 Wall mounting holes (see page 8)
1 LCD screen
2 Touch border (tap/slide)
3 Touch border (tap only)
4 Touch-sensitive raised guide
2
1
To use the touch border, see page 6.
3
4
9
56
7
8
4
1
2
3

2www.kodak.com/go/easysharecenter
1Getting started
Setting up your picture frame
Attaching the frame stand
Your frame displays pictures in landscape . To change to portrait , see page 7.
Attaching the power cable
CAUTIO :
Do not use this power cable with other devices, including digital
cameras.
Make sure the tab is
secure in the slot.
Tab
Slot
Your power cable may look different from
the one pictured. Use the plug that
accommodates your type of power outlet.

Getting started
www.kodak.com/go/digitalframesupport 3
Turning on your frame
Setting your language
The language screen appears the first time you turn on your frame.
Using the touch borders (see page 6):
■Slide to find your language, then tap OK.
To change the language at a later time:
■Tap (Home) → (Settings), then slide to
highlight Language.
The language screen appears.
Slide to highlight your language, then tap OK.
On/Off button

Getting started
4www.kodak.com/go/easysharecenter
Enjoying your pictures immediately!
■To view your pictures or play a slide show,
insert a memory card, or connect a camera or other
US device (see page 5).
If you are at the Home screen, see page 10 to start
your slide show.
To change the slide show order, see page 12.

Getting started
www.kodak.com/go/digitalframesupport 5
Inserting a memory card
Connecting a digital camera or other USB device
MultiMedia Card
SD/SDHC
Memory Stick
xD
To insert a card, push the card firmly into
the slot until it stops.
top card slot - push in the card to release it.
side card slot - pull out the card
To remove a card from:
SD/SDHC
CAUTION: Do not insert a micro or mini
memory card without an adapter.
US cable included
with your US device
US devices: camera, flash
drive, card reader, etc.
(sold separately)

Getting started
6www.kodak.com/go/easysharecenter
Using your frame’s touch border
Touch along the raised guide at the bottom (tap/slide) or right (tap only) border to
find/highlight menu items or pictures. Press OK to select them.
NOTE: The screen is not touch-sensitive. Do not touch.
CAUTIO :
Only use your finger to touch the borders. Using sharp or metal
objects may damage the border or screen.
■Tap at bottom or right to
find/highlight menu items or
pictures
Close
- Home
- Slide show
Tap Menu or More for more options.
Tap to resume a slide show.
On the raised guide:
■Touch, hold until the screen
changes, then slide along
bottom to move quickly through
numerous images
■Slide along bottom to
find/highlight selections quickly.
Sliding right to left during a
slide show quickly scrolls
forward through your pictures.
Slide left to right to reverse
or
If the icons disappear, tap the touch border.

Getting started
www.kodak.com/go/digitalframesupport 7
Turning off your frame
■Standby mode—Press the power button on the
frame.
■Power off—Unplug the power cable.
Changing your frame orientation
Your frame is set up to display pictures in landscape orientation. You can turn the
stand to change it to portrait but you must also change the setting.
Change the stand position:
1R
emove the stand, turn it 90 ° , and replace as shown (see
page 2).
Change the setting:
1Tap (Home) → (Settings).
2Slide to highlight (Viewing options), then tap
OK.
Slide to highlight Frame orientation, then tap OK.
Slide to highlight Portrait, then tap OK.
3Tap to exit.

Getting started
8www.kodak.com/go/easysharecenter
Mounting your frame on the wall
Use wall-anchoring hardware (not included) to anchor your frame securely to your wall.
To change to portrait , turn your frame 90° and use
the wall mounting holes at the top.
Wall mounting holes
Power cable
Clip (use to reroute and secure power cable)

www.kodak.com/go/digitalframesupport 9
2Doing more with your frame
Accessing your pictures
Tap Home to access pictures from your memory card and all connected devices (see
page 5). Use the touch borders to make your selections
( see page 6 ) .
1Tap (Home).
All connected sources and the Settings icon are
displayed.
2Slide to highlight a picture source, then:
■Tap (Slide show) to start a slide show.
OR
■Tap OK to view thumbnails.
Picture source icons:
Memory card—appears when you insert a card (page 5). The label and icon indicate
the type of card.
Camera—appears when you connect a digital camera via US cable (page 5).
US drive—appears when you insert a US flash drive (page 5).
Settings—customize your frame settings. For example; set slide show durations and
transitions, set viewing options, screen brightness, clock, and timer. See the
extended user guide at www.kodak.com/go/digitalframesupport.

Doing more with your frame
10 www.kodak.com/go/easysharecenter
Viewing your pictures
Playing a slide show
There are three ways to start a slide show on your frame:
■Insert a memory card or US device, then turn on the frame.
■Turn on the frame, then insert a card or connect a US device—a new slide show
starts automatically, replacing a currently running slide show or single view picture.
■HIghlight a picture in thumbnails view or highlight a picture source on the Home
screen, then tap (Slide show).
NOTE: A slide show plays continuously until you stop it or turn off the frame.
NOTE: If a slide show is running and the screen icons are unavailable, tap the touch border. Tap (Close)
to hide the icons.