Kodak W820 - EASYSHARE Digital Frame User manual

User's
guide
Guide
d'utilisation
Guia
del
usuario
Guia
do
Usuario
Digital
Picture Frame' Cadre photo numerique
Marco
totogralico
digital
•porta-retratos
digital
Kodak
EasyShare
W820·W1020

www.kodak.com/go/digitalframesupport 1
ENGLISH
See the extended user guide – for more information about using your frame, visit
www.kodak.com/go/digitalframesupport. See the frame package for package contents.
Front View
Back/Right View
1 LCD screen
2 Quick Touch border (bottom, tap/slide)
3 Quick Touch border (right side, tap only)
4 LED lights
3
1 2 To use the touch border, see page 4.
4
NOTE: When screen icons appear, LED
lights turn on at touch-sensitive points
along the Quick Touch Borders.
1 Audio In
2 Audio Out
3 DC-In (12V)
4 Speakers
1
2
3
4

2www.kodak.com/go/easysharecenter
Back/Side View
1 Power button 5 Volume button
2 Wall mounting holes 6 Memory card slot - CF, MD
3 Rotating/extending stand 7 USB connector (to camera/USB device)
4 Memory card slot - SD, MMC, MS, xD 8 USB connector (to computer)
5
6
7
8
4
1
2
3

www.kodak.com/go/digitalframesupport 3
1Getting started
Setting up the stand; attaching the power cable
Your frame is set up to display pictures in landscape orientation. You can turn the
stand to change it to portrait but you must also change the setting (see the
extended user guide).
Turning on your frame
Your power cable may look
different from the one
pictured. Use the plug that
accommodates your type of
power outlet.
Stand (pull out to adjust the frame angle)
Power button- press and hold for 2 seconds, then release.

Getting started
4www.kodak.com/go/easysharecenter
Using your frame’s Quick Touch Borders
Done
Close
IMPORTANT: The screen is not touch-sensitive. Do not touch it.
Tap the light
closest to a button
to select it.
Touch tips
Home
Play slide show
*Quick Touch
Tap and slide on the Quick
Touch Borders* only.
Tap lights
below buttons
Slide on
bottom border
only
Slide to highlight
menus, pictures,
videos, options.**
Tap OK to select
them.
Slide to scroll:
Scroll through images—Like turning the pages of a book, slide left ←to go forward, slide right →to go back. For
faster scrolling through larger numbers of pictures, touch and hold (3 seconds), then slide to the end of the border.
Scroll through menus—Slide right →to scroll down, slide left ←to scroll up.
Borders
** Tap below small arrows at the ends of the scroll bar to move the highlight one picture, menu, or item at a time.
Tap lights next to
buttons
Don’t hover,
borders can be
sensitive.
(No sliding here)
Tap a border to
display the icons.
Tap Close to
dismiss them.
OK
Only use your finger to touch the borders. Sharp or metal objects may damage the border or scre
e

Getting started
www.kodak.com/go/digitalframesupport 5
Setting your language
The language screen appears the first time you turn on your frame.
■Slide (or tap below slider arrows) on the bottom
border to highlight your language, then tap Save.
NOTE: Slide left/right on the lights to move up or down the list.
To change the language at a later time:
■Tap (Home) → (Settings) → Language.
The language screen appears.
Slide to highlight your language, then tap Save.
Connecting to your wireless network
After you set your language, your frame scans for available wireless networks. See
Connecting to your wireless network, page 7.
Enjoying your pictures immediately!
■To view your pictures or play a slide show,
insert a memory card, or connect a camera or other
USB device (see page 6). Your pictures play
automatically.
If your frame has preloaded sample pictures, they
start playing automatically.
Slider arrows
Save

Getting started
6www.kodak.com/go/easysharecenter
Inserting a memory card
Connecting a digital camera or other USB device
Secure Digital
MultiMedia Card
Memory Stick
xD
■To insert a card, push the card firmly
into the slot until it stops.
■To remove a card from:
- top card slot, push in the card to release it.
- side card slot, pull out the card
CompactFlash
MicroDrive
Do not insert a micro or mini
memory card without an
adapter.
IMPORTANT:
USB cable included
with your USB device
USB devices: camera, flash drive, card
reader, etc. (sold separately)

www.kodak.com/go/digitalframesupport 7
2Setting up for wireless
operation
If you have problems with your wireless setup or connection, see
Troubleshooting starting on page 22. Or open EASYSHARE Digital Display Software on
your computer (see page 11) and click Tools → Wireless Troubleshooter. Follow the
automated troubleshooting wizard.
Connecting to your wireless network
To allow your frame to access the contents of your computer wirelessly, connect your
frame to your wireless home network.
NOTE: If you are not sure you have a wireless network, ask the person who set up your computer.
1First time—If this is the first time you turned on your frame, tap Save after you set
your language (page 5).
The Scanning for available wireless networks... screen appears.

Setting up for wireless operation
8www.kodak.com/go/easysharecenter
Available wireless networks are listed.
Tap Back to dismiss the screen and connect later.
Later—To connect later, tap Home →Settings → Network → Scan for
wireless networks. Then follow the screen prompts and continue with step 2below.
If your wireless network is not found, select Scan again. You may need to enter the
network SSID (sometimes called the network name) manually. The person who set
up your network can help you with this information. Or, tap Help me connect for
more information.
2With your home network highlighted, tap OK to connect to your home network.
The Connecting... screen appears.
Or, select Exit without connecting and go to the Home screen (page 14).
Enter security key (if you have security enabled)
If you have wireless network security enabled, you are prompted to enter your
security key (WEP or WPA) on the on-screen keyboard. Slide along the bottom of the
NOTE:
If the scan finds multiple networks,
your home network (with the highest
% signal strength) is usually listed
first and highlighted.
Or, to select another network, slide or
tap below the arrows to highlight a
network, then tap OK.

Setting up for wireless operation
www.kodak.com/go/digitalframesupport 9
touch border (or tap below slider arrows) to highlight a character then tap
(Select) to enter it in the text box. Tap Done when finished.
If you do not have security enabled, go to step 3.
NOTE: The screen identifies your security as either WEP or WPA .
A
WEP security key can be either:
5 or 13 characters (0-9, A-Z, some special characters, case sensitive),
10 or 26 characters (0-9, A-F, not case sensitive).
A
WPA key is 8-63 characters, case sensitive.
The person who set up your network can provide you with this information.
Congratulations! You have successfully connected to your network. Return to this
screen later to make sure the wireless network and software are working properly.
3If you haven’t done so already, install the KODAK EASYSHARE Digital Display
Software (see page 10) so your frame can display wireless content properly.
Slider arrows
Backspace - erases text
Keep sliding (or tapping
arrows) left/right to go to the
previous or next row.
Select
Text box
Navigation tip: