SPECIFICATIONS
3D Mo e Active Shutter
Weight 30+-2g (No packaging)
Synchronisation Frequency 120Hz
Synchronisation Bluetooth
Transmittance 37 +/- 2%
Contrast 1000:01:00
SC 10uA
DC 1.0mA
Power Supply Lithium Button Battery
Battery Capacity 150mAh
Battery Type CR2025
Acceptance Angle 360
Receiving Frequency 2.4GHz
Bluetooth Stan ar Bluetooth 3.0
Battery Working Time 120 hours+
Working Con itions Operating Temperature: 0 ~ 40C
Storage Temperature: -5 ~ 50C
CONNECTION METHOD
Before use, please ensure the 3D glasses have connecte to the 3D TV via bluetooth to ensure that
your glasses will receive the synchronisation signal.
1. Turn on the TV an ensure that the 3D output mo e is set an running.
2. While TV is isplaying the 3D image, press an hol the Power Switch for 1.5 secon s to
make the glasses attempt to pair with the TV.
3. When the LED in icator light starts flashing once every 0.5 secon s, this means the glasses
have paire correctly.
4. When the light stops flashing within 10 secon s, the 3D glasses lens shutters will activate
an you can watch the 3D images.
5. If the blue light continues flashing, this in icates that no successful connection has been
ma e, at which point the glasses will turn themselves off automatically after 10 secon s.
Please follow the above steps again to re-connect.