Kogan E8 User manual

E8 CORDED STICK
VACUUM CLEANER
KAVACSTE08A

When using an electrical appliance basic safety precautions should always be followed
including the following:
• Read all safety instructions and retain this guide for future reference.
• Children aged 8 years and above or persons with reduced physical, sensory or
mental capabilities should only use this appliance while under supervision or
instruction from an adult or carer.
• Children aged 8 and above should not clean or perform user maintenance on this
appliance unless under supervision or instruction from an adult or carer.
• Do not operate any appliance with a damaged or abnormal cord or plug. If the
main cord is damaged, it must be replaced by Kogan.com or a service agent on
Kogan.com's behalf.
• Do not turn off the appliance by pulling the power cable out of the power socket.
• Do not vacuum burning cigarettes, water and other liquids, sharp or heavy objects.
• Do not leave this appliance near any sources of heat.
• For optimal results, we recommend cleaning the dustbin and brush head regularly.
For more details, refer to the Cleaning & Care section of this guide.
• To a v o i d t h e m o t o r o ve r h e a t i n g d o n o t u s e t h i s a p p l i a n c e f o r l o n g e r t h a n 3 0 m i n s a t
a time.
SAFETY & WARNINGS

1
Tu b e c o n n e c t i o n
7
Dustbin
2
Dustbin removal button
8
2-in-1 brush head
3
Power button
9
Floor brush
4
Handle
10
Metal tube
5
Filter
11
Power cord
6
Dustbin door release
OVERVIEW

Start-Up
Configuration 1:
1. Insert the 2-in-1 brush head (1) or floor brush (2) into the tube connection (3).
2. 2-in-1 brush head: Use this brush to clean upholstered surfaces, keyboards, lamps,
curtain, blinds, vents, etc. Perfect for cleaning hair and dust on fabric. Use the
crevice portion for the normal cleaning tasks. To switch between brush and crevice
portion, pull the brush section in the direction of the arrow until it locks in place.
Configuration 2:
Insert the metal tube (1) and floor brush (2) into the tube connection (3). This configuration
is best for cleaning floors, carpet and smooth surfaces.
INSTALLATION

Before First Use
Unpack the appliance and any accessories. Dispose of the packing materials.
Ensure all packing material around the appliance and the protective elements
inside the appliance compartments are removed prior to first use.
• Carton board and the sheets of paper included are recyclable. They must be
disposed of in the appropriate recycle bin.
• Materials bearing the symbol are recyclable:
PE = Polyethylene; PS = Polystyrene; PP = Polypropylene
They must be disposed of in the appropriate recycle bin.
• Any other packaging material (adhesive, fasteners, etc.) must be disposed of with
regular household waste.
1. Plug the vacuum into the power socket, press the power button, the vacuum will
turn on.
2. After cleaning, press the power button again and the appliance will turn off.
3. Disconnect from the power outlet and store the appliance away.
OPERATION
Note:
To a v o i d t h e m o t o r o v e r h e a t i n g , d o n o t o p e r a t e t h e v a c u u m f o r l o n g e r t h a n 3 0 m i n s
at a time.

Before performing any maintenance, please ensure the vacuum is turned off and
disconnected from the power outlet.
For best results, it is recommended to clean the dustbin, filters and brush head regularly.
Please use a dry soft cloth to clean the appliance and accessories.
Cleaning the Dustbin and Filters
Step 1.
Press the dustbin release
button (1) to open the
bottom cover and empty
out any dust.
Step 2.
Press the dustbin removal
button (1) to remove the
dustbin (2).
Step 3.
• Twi st t h e d us t bin
counter-clockwise to
open the container and
then remove both
filters.
• Shake the filter to
remove any dust and
replace if necessary.
CLEANING & CARE
1

Cleaning the Brush Head
• Ensure that the brush head entry and outlet is completely clean and clear of all
dust and debris.
• Clean the three brushes ensuring they are free of hair, dust and debris
• Wipe the brush head using a slightly damp soft cloth.
Brush
Brush
Entry
Outlet

Power
500W
Voltage
240V
Frequency
50Hz
Noise
<78dB
Vacuum
>12Kpa
SPECIFICATIONS

If you encounter a problem with your device or if you suspect the device is not working
properly, you can make a few simple checks before contacting help.Kogan.com.
Problem
Solution
The vacuum does not power on
Check that the power cord is properly
plugged in to power outlet and switched on.
Loss of suction
• Check to see if the air inlet is clogged.
Unplug and clean if necessary.
• Check that the filters, dustbin and
brush are all cleaned and correctly
installed. Empty the dust bin and clean
the filters if necessary.
Vacuum suddenly turned off during
operation.
• This vacuum features a thermo sensor.
If the temperature is in excess of 105°C
the vacuum will turn itself off.
• Avoid using the vacuum for longer than
30mins at a time.
• Allow the vacuum to cool down before
attempting to power it back on.
Everything seems ok after checks, but the
vacuum still will not power on
Please contact help.Kogan.com for support.
TROUBLESHOOTING

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com