Kogan KAVACUV22CA User manual

CORDLESS 22.2V VACUUM
CLEANER WITH UV SANITISER
KAVACUV22CA

•Read all instructions fully before using the product for the first time and retain
them for reference. If passing this product on to a new owner, include a copy of this
guide.
•Any operation that does not comply with the instructions of the manual may result
in serious personal injury, property damage or damage to the product itself.
•This product is intended for household use. Do not use it to suck up metal particles
or construction waste. This product is not intended for use by people who have no
experience and knowledge of bed mites, including children, unless they are
supervised and responsible for their safety.
•Do not stand or sit on this product.
•Keep this product in a safe place out of reach of children. Do not store the unit in a
high place to avoid the risk of accidental falls.
•This product is not intended for use by persons with physical, sensory, or
intellectual disabilities or those who lack experience and common sense (including
children) unless they are supervised or directed to ensure that they are safe to use.
•This product is only suitable for working in a dry environment. Do not use it in a
humid environment.
•This product is not waterproof. Do not use it to vacuum water or damp dust.
•Do not vacuum high-temperature substances (cigarettes, matches or hot ash),
ultra-fine materials (such as lime, cement, wood chips, gypsum powder, ash, toner,
etc.), sharp objects (such as glass, nails, pins, etc.), dangerous goods (such as
solvents, detergents, etc.), chemicals (such as acidic substance, detergents, etc.)
or flammable or explosive liquids (gasoline, alcohol products).
•Keep the suction area and moving parts away from hair, loose clothing, fingers,
and other body parts, especially eyes and ears.
•Ensure the area is clear before use. If you find paper, paper balls, plastic cloth or
sharp objects and things that are thicker than the straw diameter, remove this
debris to avoid damage to the product.
•If the unit is leaking or the motor temperature is too high and abnormal sounds are
heard, discontinue use immediately and contact Kogan.com
•Ensure to check and empty the dust cup regularly to keep the ventilation hole
unobstructed, which avoids blockages and loss of suction.
•Do not use lubricants, detergents, polishes, etc., to clean the unit
•Do not attempt to repair or modify the unit. Contact Kogan.com in the event of a
fault.
•This product is a power tool; never allow it to operate unattended.
•Keep the appliance away from heat sources or fire.
SAFETY & WARNINGS

•Do not disassemble the dust cup, the UV lamp cover or open the air hood when
the machine is powered or running to avoid injury or machine damage.
•Only use the original power adaptor included with the product.
Ultraviolet safety precautions
•This product is equipped with an ultraviolet sterilising lamp; avoid looking at the
bottom of the machine when the power is on and the ultraviolet sterilising function
is enabled to prevent personal injury.
•Avoid exposing animals and plants to ultraviolet rays.
•Do not concentrate UV rays in one place for an extended period, as this may cause
damage to surfaces.
•Do not point the ultraviolet lamp at the skin or eyes.
•Avoid exposing the photosensitive components at the bottom of the machine to
strong direct light during operation, as this may lessen performance and present
the risk of failure.
•Clean the surface of the sensor probe with a clean cloth to prevent dust build-up
and ensure proper operation.
OVERVIEW
Range sensor
Roller wheel
Flap mode
Indicator light
UV and flap indicator light
Dust box
Cyclone
filter
Cotton
filter
Dust
cover
Power
Dust box
Suction inlet
UV light
Lamp cover
knob
Charging
connector

Before use
•Ensure the components of the UV vacuum cleaner are assembled in place.
•Check whether the power is sufficient to ensure the product works normally.
Charging instructions
•Plug the adapter into the charging base and the other end into the power socket.
•Do not operate the appliance whilst charging.
•The power indicator light is fully charged when all three lights are illuminated.
•Put the machine into the charging base and the power indicator will flash to
indicate charging is in progress.
•Charge the battery fully when you use a new battery, before first use or after long-
term storage.
•Charge for more than 3 hours before the first use.
OPERATION
The power indicator
flashes in turn when
charging
ATTENTION: Before assembling the product, please check the accessories
list below and confirm that all parts have been received.

Indicator light
Press the power button, and once all three lights are illuminated, the machine is ready to
operate. Press the power button again to power the unit off.
UV and flap Instructions
When the machine touches the object surface, the infrared sensor detects the object. When
the UV light is on, the flap will engage. When the machine is removed from the surface and
the infrared sensor cannot detect the surface, the UV light and flap will both disable.
•3 lights 100%
•2 lights 65%
•1 light 30%
•1 light to flash, need to be
charged
UV and flap Indicator Light
ATTENTION: To avoid accidental pet injury, the UV lamp is equipped with
an infrared sensor safety switch. The UV lamp will automatically disable until it
is in contact with the surface to be cleaned.

Cleaning the dust box
Remove the dust box Separate the dust box
Clean the dust box with
a brush
Turn the dust cap clockwise
and remove the cyclone filter
Wash the cyclone filter
Clean the cotton filter
with a brush or wash
CLEANING & CARE
Turn the dust cap clockwise

Exhaust filter
Twist the outlet housing clockwise
Remove the exhaust filter and wash
Daily storage
•When not using the machine for a long time, store in a cool and dry place. Do not
place the machine in direct sunlight or a moist environment.
•When you do not use the machine for a long time, make sure to charge and
discharge the battery at least once every three months.
Outlet housing
ATTENTION: Washable parts can only be reinstalled into the appliance
once they have dried completely.

Voltage
21.6V
Power
100W
Max Power
120W
Capacity
≥0.5L
UV lamp power
6W
Net weight
1.5kg
Charging time
4.5h
Adapter voltage input
100-240V~ 50/60Hz
Adapter voltage output
DC 26V 0.5A
Working time
Approx. 25min
Battery capacity
2200mAh
Main unit
Charging base
Dust cup (pre-assembled)
Power adaptor
User Guide
Brush
SPECIFICATIONS
IN THE BOX

Details
Possible cause
Solution
Machine will not power on
Low battery
Charge the battery
Power switch has not been
pressed
Press the power switch
Insufficient suction The suction inlet of the
machine is blocked Clean the suction inlet
UV light does not work
Object surface is not smooth,
or the machine bottom does
not fully touch the object, so
the safety feature is enabled
Keep the surface flat or the
machine bottom the full
contact with the surface to
be cleaned
Lamp tube damaged
Replace the lamp tube
Excessive noise
•Full dust cup
•The suction inlet is
blocked
•The dust cup filter is
blocked
Discontinue use and clean
out the blockage
No filtering component is
installed
Install the filter component
TROUBLESHOOTING

NOTES

Need more information?
We hope that this user guide has given you
the assistance needed for a simple set-up.
For the most up-to-date guide for your product,
as well as any additional assistance you may require,
head online to help.kogan.com