Kohl's SONOMA PRESIDIO LOVESEAT GLIDER 61SRR4504 User manual

Page 1/4
PART LIST QUANTITY
A1 PC
B1 PC
C1 PC
D1 PC
E4 PCS + 1 PC
F4 PCS + 1 PC
G4 PCS + 1 PC
H1 PC
I6 PCS + 1 PC
J6 PCS + 1 PC
K6 PCS + 1 PC
L1 PC
M1 PC
N2 PCS
O2 PCS BACK CUSHION
BASE
SEAT CUSHION
SMALL BOLT CAP
SMALL ALLEN WRENCH
SMALL BOLT
(Φ6X25MM)
SMALL WASHER
LARGE BOLT CAP
LARGE ALLEN WRENCH
LARGE BOLT
(Φ8X20MM)
LARGE WASHER
RIGHT ARM
LEFT ARM
SEAT
BACK
ASSEMBLE ON A FLAT, PROTECTED SURFACE.
FIGURE
DESCRIPTION
SAVE THESE INSTRUCTIONS
SONOMA PRESIDIO LOVESEAT GLIDER
STYLE #:
61SRR4504

Page 2/4
STYLE #:
61SRR4504
STEP 1
A. PLACE RIGHT ARM (C) ON A FLAT, PROTECTED
SURFACE.
B. ATTACH SEAT (A) TO RIGHT ARM (C) USING LARGE
BOLTS (E) WITH LARGE WASHERS (F) USING LARGE
ALLEN WRENCH (H). DO NOT TIGHTEN COMPLETELY.
STEP 2
A. ATTACH BACK (B) BY ALIGNING 2 BACK PINS WITH
THE HOLES ON RIGHT ARM (C) AND INSERTING 2 SEAT
PINS INTO HOLES ON BACK (B).
B. INSERT SMALL BOLTS (I) WITH SMALL WASHERS (J)
THROUGH BACK (B) INTO SEAT (A) USING SMALL ALLEN
WRENCH (L). DO NOT TIGHTEN COMPLETELY.
C. INSERT SMALL BOLTS (I) WITH SMALL WASHERS (J)
THROUGH RIGHT ARM (C) INTO BACK (B) USING SMALL
ALLEN WRENCH (L). DO NOT TIGHTEN COMPLETELY.
ASSEMBLY INSTRUCTIONS (CONTINUED)

Page 3/4
STEP 3
A. ATTACH LEFT ARM (D) BY INSERTING 2 BACK PINS
INTO HOLES IN LEFT ARM (D).
B. INSERT LARGE BOLTS (E) WITH LARGE WASHERS (F)
THROUGH SEAT (A) INTO LEFT ARM (D) USING LARGE
ALLEN WRENCH (H). DO NOT TIGHTEN COMPLETELY.
C. INSERT SMALL BOLTS (I) WITH SMALL WASHERS (J)
THROUGH LEFT ARM (D) INTO BACK (B) USING SMALL
ALLEN WRENCH (L). DO NOT TIGHTEN COMPLETELY.
D. TIGHTEN COMPLETELY ALL LARGE BOLTS (E) AND
SMALL BOLTS (I) USING LARGE ALLEN WRENCH (H) AND
SMALL ALLEN WRENCH (L).
E. COVER LARGE BOLTS (E) USING LARGE BOLT CAPS
(G).
F. COVER SMALL BOLTS (I) USING SMALL BOLT CAPS (G).
STEP 4
A. ATTACH BASE (M) TO RIGHT ARM (C) AND LEFT ARM
(D) BY ALIGNING 4 BOLTS ON BASE WITH HOLES ON
ARMS. FULLY TIGHTEN BOLTS USING LARGE ALLEN
WRENCH (H).
B. COVER BOLTS USING LARGE BOLT CAPS (G).
ASSEMBLY INSTRUCTIONS (CONTINUED)
STYLE #:
61SRR4504

Page 4/4
CALL: 1-800-327-2978 9AM TO 5PM EST, Monday-Friday
EMAIL: [e-mail]
CUSTOMER SERVICE
FOR REPLACEMENT PARTS OR FOR ADDITIONAL INFORMATION
** WE RECOMMEND THAT YOU SAVE THE ALLEN WRENCH (H & L) AND PERIODICALLY TIGHTEN ALL BOLTS.
DO NOT STAND OR CLIMB ON THE LOVESEAT GLIDER.
WARRANTY
1 YEAR LIMITED WARRANTY FOR FRAME, WEAVE AND CUSHIONS.
WHAT IS COVERED:
WE WARRANT TO THE ORIGINAL PURCHASER FOR ONE YEAR, FROM THE DATE OF PURCHASE, THAT THE FRAME, RESIN
WEAVE AND CUSHIONS WILL BE FREE FROM MANUFACTURING DEFECTS. THIS WARRANTY ALSO COVERS PEELING, CRACKING,
BLISTERING, DISCOLORATION, OR FADING FOR THIS ONE YEAR PERIOD.
WHAT IS NOT COVERED:
IT REMAINS THE CUSTOMER'S RESPONSIBILITY FOR FREIGHT AND PACKAGING CHARGES TO AND FROM OUR SERVICE
CENTER. THIS WARRANTY DOES NOT COVER COMMERCIAL USE, ACTS OF NATURE, FIRE, FREEZING, AND ABUSIVE USE.
DISCOLORATION OR FADING OF THE FINISH OR FABRICS AS A RESULT OF CHEMICALS OR SPILLS IS NOT COVERED. GLASS
TABLETOP BREAKAGE AND CORROSION OR RUSTING OF HARDWARE ARE NOT COVERED. IN ADDITION, PURCHASED PART ARE
NOT COVERED UNDER THIS WARRANTY. PROOF OF PURCHASE (DATED REGISTER RECEIPT) IS REQUIRED FOR WARRANTY
CLAIMS. WE RESERVE THE RIGHT TO MAKE SUBSTITUTIONS WITH SIMILAR MERCHANDISE, IF THE MODEL IS NO LONGER IN
PRODUCTION. WARRANTY IS TO THE ORIGINAL PURCHASER AND IS NOT TRANSFERABLE. AS SOME STATES DO NOT ALLOW
EXCLUSIONS OR LIMITATIONS ON AN IMPLIED WARRANTY, THE ABOVE EXCLUSIONS AND LIMITATIONS MAY NOT APPLY. THIS
WARRANTY GIVES YOU SPECIFIC RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY FROM STATE TO STATE.
500 LBS
WASH FRAME WITH MILD SOLUTION OF SOAP AND WATER, RINSE WITH CLEAN WATER AND DRY THOROUGHLY.
CUSHIONS SHOULD BE SPOT CLEANED WITH A SOFT CLOTH.
STYLE #:
61SRR4504
WEIGHT LIMIT
ASSEMBLY INSTRUCTIONS (CONTINUED)
STEP 5
A. ROTATE ASSEMBLED UNIT TO UPRIGHT POSITION.
B. PLACE SEAT CUSHIONS (N) AND BACK CUSHIONS (O)
ON THE LOVESEAT GLIDER.
C. ASSEMBLY IS COMPLETE
CARE AND CLEANING