Kohl's THE BIG ONE ROCKING DISH CHAIR User manual

PART LIST QUANTITY
A 1 PC
B 2 PC
C4 PC
D2 PC
E4 PC
F1 PC
SAVE THESE INSTRUCTIONS
THE BIG ONE ROCKING DISH CHAIR ASSEMBLY INSTRUCTIONS
ASSEMBLE ON A FLAT, PROTECTED SURFACE
FIGURE
DESCRIPTION
Chair
A. STANDING AT THE BACK OF THE CHAIR (A), LIFT
UP THE BACK UNTIL THE SPRING PIN IS FIXED IN THE HOLE.
B. APPLY PLASTIC CAPS (C) TO BOLT HOLES ON TOP OF LEGS
AND APPLY PLASTIC CUFFS (B) TO BOTTOMS OF LEGS OVER
BOLT HOLES.
C. THE CHAIR IS NOW ASSEMBLED AND READY FOR USE.
USE AS STATIONARY CHAIR
Plastic Cuff
Allen Wrench
Plastic Cap
Runner
Bolt
Page 1/2

CUSHION: SPOT CLEAN WITH A SOFT, DAMP CLOTH AS NEEDED.
A. STANDING AT THE BACK OF THE CHAIR (A), LIFT UP THE
BACK UNTIL THE SPRING PIN IS FIXED IN THE HOLE.
B. ROTATE SEAT UPSIDE DOWN ON A FLAT, PROTECTED
SURFACE. PLACE RUNNER ONTO CHAIR (A). CONNECT
RUNNER TO LEGS USING ALLEN WRENCH (F) AND BOLTS (E).
REPEAT WITH SECOND RUNNER.
C. ROTATE SEAT UPRIGHT. TIGHTEN ALL BOLTS COMPLETELY.
D. THE ROCKING DISH CHAIR IS NOW ASSEMBLED AND
READY FOR USE.
USE AS ROCKING CHAIR
WEIGHT LIMIT
250 LBS
CARE AND CLEANING
FRAME: WIPE CLEAN WITH A SOFT, DAMP CLOTH AS NEEDED.
INTENDED FOR INDOOR USE ONLY
DO NOT STAND OR CLIMB ON THE CHAIR
Page 2/2