Kohler FLEXISPACE 2.0 K-23794T-1 User manual

ORDERING INFORMATION
FLEXISPACE 2.0 600 Synthetic Top ......................K-23794T-1
FLEXISPACE 2.0 700 Synthetic Top ......................K-30410T-1
FLEXISPACE 2.0 800 Synthetic Top ......................K-23795T-1
FLEXISPACE 2.0 900 Synthetic Top ......................K-23796T-1
FLEXISPACE 2.0 1000 Synthetic Top.....................K-23797T-1
FLEXISPACE 2.0 1100 Synthetic Top.....................K-30411T-1
FLEXISPACE 2.0 1200 Synthetic Top.....................K-23798T-1
FLEXISPACE 2.0 1200 Synthetic Top-2 Hole.......K-23798T-2H
FLEXISPACE 2.0 1200 Synthetic Top-2 Lav ........K-23049T-2H
2.0 600mm.....................................K-23794T-1
2.0 700mm.....................................K-30410T-1
2.0 800mm.....................................K-23795T-1
2.0 900mm.....................................K-23796T-1
2.0 1000mm...................................K-23797T-1
2.0 1100mm...................................K-30411T-1
2.0 1200mm...................................K-23798T-1
2.0 1200mm ..................K-23798T-2H
2.0 1200mm .........................K-23049T-2H
FLEXISPACE 2.0 2.0
INSTALLATION INSTRUCTIONS
SYNTHETIC TOP
K-23794T-1/K-30410T-1/K-23795T-1
K-23796T-1/K-23797T-1/K-30411T-1
K-23798T-1/K-23798T-2H/K-23049T-2H
-1-
BEFORE YOU BEGINBEFORE YOU BEGIN
·
·
·
·
·
·
·
Please read these instructions carefully to familiarize
yourself with the required tools, materials, and installation
sequences. Follow the sections that pertain to your
particular installation. This will help you avoid costly
mistakes. In addition to proper installation, read all
operating and safety instructions.
All information in these instructions is based upon the
latest product information available at the time of
publication. Kohler China. reserves the right to make
changes in product characteristics, packaging, or
availability at any time without notice.
These instructions contain important care, cleaning, and
warranty information-
Turn off the water supply.
The pluming installation must comply with Water Supply
Regulations/Bye-laws, Building Regulations or any
particular regulations and practices, specified by the local
water company or water undertakers. The installation
should be carried out by a plumber.
Before installation carefully inspect the new fixture for any
signs of damage.
please leave instructions for the
consumer.
This product complies with GB 24977-2010.
·
·
·
·
·
·
·
-
GB 24977-2010
SAFETY WARNINGS
Kohler products are precision-engineered and should give
continued superior and safe performance, provided:
1. They are installed, commissioned, operated and
maintained in accordance with the recommendations given
in this Manual.
2. Periodic attention is given, as necessary, to maintain the
product in good functional order. Recommended
guidelines are given in the section.
Carefully inspect the new fixture for any signs of damage.
MAINTENANCE
1.
2.
CHANGSHU KOHLER LTD., SOUTHEAST ECONOMIC DEVELOPMENT ZONE,
CHANGSHU, JIANGSU PROVINCE, CHINA POST CODE 215500
215500
©
©
Copyright Kohler China Investment Co., Ltd. 2020
2020
1408369-T01-A

ROUGHING-IN
UNIT : mm
Kohler reserves the right to change marked dimensions without prior notice.
Reference Value
INSTALLATION
Install Synthetic Top
1. Install the synthetic top on to cabinet.
Attention: Handle with care when install the top. Avoid
scrubbing with hard dejects. Do not hang on the top
separately, must be supported by the basin cabinet.
1.
-2-
a. Place the top on the basin cabinet as shown in the
illustration below and mark the attachment hole.
b. Fit the wall plugs and attachment bolts.
The hot and cold water supplies must terminate with a
supply shut off Valve.
c. Apply silicone sealant to the top of cabinet.
d. Fit the top in position over the attachment bolts. Make
sure the top sit on the cabinet.
e. Adjust the offset nut until the top is level.
f. Remove any excess silicone sealant.
NOTE:
a.
b.
c.
d.
e.
f.
K-23794T-1 K-30410T-1 K-23795T-1 K-23796T-1
K-23797T-1 K-30411T-1 K-23798T-1
K-23798T-2H K-23049T-2H
80
80
80
80
594
245 245 295
245
180
93
93
93
93
65
65
65
65
447
447
447
447
190
694
280
190
794
380
190
894
380
80
295
93
65
447
190
994
480
80
93
65
447
80
93
65
497
190
1094
380
395
190
1194
380450
80
80
93
65
65
497
497
497
497
190
1194 1194
380440
214 190 190
80 80
190
265 265
449 296 449
190
45
75
35
75 75
75
35
45
35 35
45 45
35
35
45
45 75
75
35
35
45
45 75
75
45
35
75
1408369-T01-A

-3-
594/694/794/894/
994/1094/1194
2
UNIT : mm
Finished Wall
Distance above
the ground may
depend on the size
of bath furniture
Anchoring Bolt
62 62
Fig.1
1
2.
a. (P )
/
2. Connect Drainage
a.Inwall drainage (P-Trap)
Please install the drain assembly and faucet as shown.
Please set the water supply and drainage position
according to the suppliers instructions. You can adjust
the height of shelf to fit the drain assembly.
Fig.2
2
Faucet
Supply Lines
Shut-off Valve
Drain Assembly
Back Board
1408369-T01-A

-4-
b. (S )
b.Floor drainage (S-Trap)
Please install the drain assembly and faucet as shown.
Please set the water supply and drainage position
according to the suppliers instructions. You can adjust
the height of shelf to fit the drain assembly.
Fig.3
3
3.
4.
5.
6.
3. Connect the hot and cold water supplies.
4. Attach the waste, and tighten securely.
5. Open the hot and cold water valves and check the supply
connections for any leaks.
6. Run water into the washbasin or vanity top, and check the
drain connections for any leaks.
Faucet
Supply Lines
Shut-off Valve
Drain Assembly
Back Board
Ripple Pipe
Outlet
a) 1200
b) 60
60
USER MAINTENANCEUSER MAINTENANCE
WARNING! Risk of product damage.
Please do not sit, lean or step on the top.
Many cleansers contain abrasive and chemical substance
which is not suitable for cleaning stainless steel, enamel,
plating or plastic products. You may use mild cleansers or
soaps to clean the surfaces. Wipe any splashes of cleaner
solutions from the surface with clean soft cloth. Clean the top
in case hair dye or cosmetics drop on it to avoid color fading.
The top should be cleaned with water and detergent. Never
use a product which contains abrasive, liquid putty powder or
other similar products. If you try to maintain the top with
automobile wax on a regular basis, say, once a year, the
impermeability of the top will be greatly upgraded. In this way,
the little graffito and dirt on the top will be easily removed. If
the top blurs after several years' use, you could apply the
following method as a remedy to restore its luster. a) To
polish the surface of the top with a piece of 1200 abrasive
paper dipped with water. b) To work with a polishing paste. In
some countries, the temperature of hot water will exceed 60 .
Continuous use of this kind of hot water may lead to crack on
the top. Therefore, avoid to use water over 60 in the
process of installing valves.
C
C
1408369-T01-A