Kolcraft Tiny Steps KW029 User manual

Model #: KW029
W031-R3 06/2022
Escanee para obtener
instrucciones en español
Scan for instructional video

2
Consumer Service: 1.800.453.7673
www.kolcraft.com
Read all instructions BEFORE assembly and USE of the walker. Failure to follow these
warnings and instructions could result in serious injury or death. For your child’s safety,
read the labels and the instructions before using product. Keep instructions for future use.
IMPORTANT SAFETY INFORMATION:
How to Keep Your Child Safe While Using this Product
• NEVER leave child unattended. Always keep child in view while IN WALKER.
• CAUTION: Toys intended to be assembled by adult! Toys are intended to be played
with while attached to the walker and are not intended to be played with when not
attached to the walker.
• CHOKING HAZARD-Small parts. ADULT ASSEMBLY REQUIRED.
This package contains small parts which, before assembly, present a choking hazard to
children under the age of three. Care should be taken during unpacking and assembly to
ensure that all small parts and plastic bags are accounted for and kept out of the reach of
children. All fasteners should be fully tightened.
STAIR HAZARD
• Avoid serious injury or death. Block stairs / steps securely before using this walker.
• Use only on flat surfaces free of objects that could cause this walker to tip over.
Never use near stairs, steps, thresholds, hills, roadways, or pools.
• To avoid burns, keep child away from hot liquids, stoves, radiators, space heaters,
fireplaces, etc.
• Discontinue using this walker should it become damaged or broken.
• Never carry this walker with child in it. Never adjust seat while child is in product.
• DO NOT lift or carry by tray or toys.
• DO NOT use this walker until baby can sit up unassisted.
• To reduce the chance of child slipping out of seat, check that both feet of child touch the floor.
• Discontinue use of activity walker (seated stage) when your child can stand unaided, walk
unassisted or lift the walker off of the floor.
• To maintain stopping performance, clean friction strips regularly with damp cloth.
Only use this activity walker (seated stage) if your child MEETS ALL of the
requirements below:
1. Can support body weight with legs
2. Weight is between 15 and 26 pounds.
3. Height is less than 32 inches and child is not able to stand flat footed while in
the walker.
CARE & MAINTENANCE
1. Plastic Parts: Wipe clean with mild soap and a damp cloth. Air dry.
2. Seat Pad: Machine wash in cold water in gentle cycle.
Air or hang dry. DO NOT use harsh detergents or bleach.
DO NOT dry clean.
NOTE: To maintain stopping performance, clean friction strips regularly with damp cloth.
LWARNING

3Consumer Service: 1.800.453.7673
www.kolcraft.com
Toy Play Tray Bead Bar Upright Toys (2)Front Casters (2)
To Assemble Walker Frame
PARTS LIST
HOW TO ASSEMBLE YOUR WALKER
1Flip over both side bases and front mount.
Align as shown and push down. Attach the front
mount to the side base legs using a Phillips
screwdriver and the 8 screws provided
(one-time assembly).
2Locate the tray & legs, and unfold the legs
outward as shown.
3Flip the base. Align the rear legs and push
down (one at a time) until each leg locks in
place.
Align the front leg and press down on
the top tray until the leg locks in place.
Front leg button should be visible.
1
2
Tray & Legs Side Base Legs (2) Front Mount Seat Pad
Rear Wheels (2)
Axles (2)
Screws (8)
33
Front Leg
Button

4
Consumer Service: 1.800.453.7673
www.kolcraft.com
Attach Seat Pad
1Place seat pad into seat ring located on tray.
Align it so that high back support aligns with
back of walker ring.
2Insert the 4 tabs on the seat pad into slots
located around the front of the seat ring.
Slide tabs through holes.
3Underneath the tray, pull tabs and align into
grooves.
4Snap the back of the seat pad around the rear
of the seat ring.
Test: Push down hard on seating area of seat
pad to make sure seat is securely in place.
CAUTION: Do not use walker if all tabs are not
secured properly, otherwise child may fall
through walker.
1
2
Tabs
High Back Support
3
Tabs
Grooves
4

5Consumer Service: 1.800.453.7673
www.kolcraft.com
Attach Rear Wheels
1Flip base over to expose underside. Locate rear
wheel opening in base of the walker.
2Align holes of wheel with corresponding axle
holes on the base of the walker. Plastic tab may
need to be pushed to the side to expose the
axle hole. The stem of the wheel should be
facing the inside of the base.
3Slide metal axle into holes from the inside
towards the outside of the base until the head
of the axle passes the plastic tab and the tab is
able to hold the axle in place.
4Repeat for other wheel.
Tab
Attach Front Casters
1Insert the stem of one of the front casters into
the hole in one of the front corners. Push firmly
until the caster snaps (locks) into place. Pull up
on caster to make sure it is locked in place.
Flip base right side up.
CAUTION: Be sure the caster is inserted fully
into the base. The top lip of the caster threads
should be flush with the base hole. Nothing
below this lip should be visible.
Top Lip of
Caster Threads
CORRECT
Assembly
INCORRECT
Assembly

6
Consumer Service: 1.800.453.7673
www.kolcraft.com
1Unscrew nuts from underneath toy play tray.
2Lift up tray to remove.
3Re-screw nuts onto bolts for safe keeping.
TO REATTACH PLAY TRAY:
Reverse steps above, making sure to screw nuts
onto bolts until nuts are firmly attached to the bolt.
The toy play tray should not move.
To Attach Toys
2
lWARNING
Do Not lift walker by toys or tray.
3
1
1
23
CAUTION: Toys intended to be assembled by adult!
1Insert bead bar into the two center slots of the
play tray. Be sure bead bar is pointed towards
seating area as shown in image.
2Insert tabs of ball toy into toy play
tray until it snaps into place.
3Insert tabs of flower toy into toy
play tray until it snaps into place.
To Remove Play Tray

7Consumer Service: 1.800.453.7673
www.kolcraft.com
To Convert to Walk-Behind Walker
As your child grows, your Tiny Steps®Walker
can be converted to a Walk-Behind Walker.
1Remove the seat pad by unfastening the 4 seat
tabs from the tray and unsnapping the rear of
the seat pad.
2Your child can now stand behind the walker,
using the texturized handle grip for support as
they learn how to walk in the walk-behind
mode.
2
2
To Adjust Seat Pad Height
NOTE: As your child begins to grow, adjust height of
walker via the seat pad so that their feet touch the
ground when seated. To determine correct height
after assembly, place child in walker and make sure
both feet touch the ground.
CAUTION: Child should not be in the walker during
adjustment.
1After seat pad is attached to tray, flip unit
upside down to access the restraint strap on
underside of seat pad.
2Please note, to ensure proper operation, you
will need to periodically adjust the seat
restraint to accommodate your child’s
increased height. For smaller babies, seat pad
should be extended to its lowest position. To
adjust seat height, push button in on restraint
strap to release restraint.
3As baby grows, raise seat by tightening belt.
This helps to prevent the child from placing
their feet flat on ground and prevents your
child from climbing out.
lWARNING
DO NOT disassemble or adjust height while
baby is sitting in or near product. Always
make sure seat pad is adjusted to the correct
height position before placing child in product.

8
Consumer Service: 1.800.453.7673
www.kolcraft.com
To Fold Walker
The walker folds easily for travel & storage.
For a smaller fold, remove the toy play tray.
1Release the front leg from the base by pressing
the leg release button and pulling up firmly on
the front leg.
2Fold the front leg under the tray until it locks
onto the tray itself.
3Rotate the tray down and to the rear of the
walker.
4Fold legs forward.
1
Front Leg Button
4
2
3
Please direct any comments, questions or replacement part requests to:
Kolcraft®Consumer Service Department
1100 W Monroe St. Chicago, IL 60607
1-800-453-7673 in U.S., 1-312-361-6315 outside U.S.
8 am-5 pm (CT) Monday - Thursday, 8 am - 3 pm Friday (CT)
e-mail: [email protected]