Kolin KHP-40AMC User manual

Caster Installation&removal
KHP-40AMC
if the installation is complete,
it’s will hear a sound click.
press the button up,
take down the caster
KPII20180704
User Manual
www.kolinphil.com.ph
SLIMLINE PANEL HEATER
WITH MECHANICAL CONTROL

1 6
This heater MUST be installed
to the minimum required
distances at the four sides of
the heater.
Floor
Minimum 100mm
Minimum 1000mm
Minimum
100mm
Minimum
100mm
Air outlet
Ceiling/Picture frame
Wall mounted mode
90
1.Insert the bracket(to the hole),turn it anticlockwise 90°, fasten it with screw;
2.Press the rubber pad (in the hole), fasten it with screw.

REPLACEMENT OF SUPPLY CORD
The supply cord damaged must be replaced by a service agent or
equivalent qualified person in order to prevent a hazard.
If you do not plan to use the heater for extended periods of time, it is
recommended that the heater is cleaned and then stored (preferably
in its original packaging) in a cool dry place.
7
8
9
5
5 2
Mounting Guide
H
H1
L
L1
KHP-40AMC
MODE
2000/1000 830 400 576 332
Specification

3 4
2.Operation Guide
Switch
Castor Wheel Stand
KHP-40AMC
Model Number
Rated Power
Rated Voltage
Dimensions(mm)
1000W/2000W
220-240V~60Hz
830*80*400
Air Outlet
3 USER TIPS
2.2 TURN ON
Press any switch(of the two) , power indicator lights on and the unit starts
heating.
2.3 HEATING LEVEL SETTING
Press any one switch, power indicator lights on, the units is heating at Low
Level.
Press two switches together, power indicator lights on, the unit is heating at
High Level.

2.4 TEMPERATURE ADJUSTING
Use the control knob to adjust temperature.
2.5 TURN OFF
Press both two switches together, indicator lights off and the unit stops
heating.