plate on the output shaft. in the innerpressure plate.
(Note: The front and back sides
of
the
imler pressure plate can be matched
with the saw blades
of
different inner
diameters.)
IX.
Maintenance
of
this machine.
Before any maintenance
of
this machine, you have to pull out the
plug and disconnect the power supply.
(1)This machine is manufactured according to safety standards.
If
there
is amalfunction, please
do
not disassemble it yourself. Be sure to askthe
maintenance department entrusted by the company
or
qualified
professional maintenance personnel to repair it, otherwise the danger will
occur.
(2) When repairing, you must use the accessories provided by the
'~£ompany,
otherwise itwill cause damage to the machine or people.
(3
)After using the machine each time, the gravel and dust on the machine
must be cleaned up, and keep the operation parts dry, such
as
switches,
plugs, grips, etc. Then put it in adry place that children can't touch,
so
as
to avoid rust and accidents.
7
