LED CAMPING LANTERN WITH REMOTE CONTROL
KDLNTLGNICA
Quick Start Guide
Product Layout
Lantern Battery Replacement Remote Controller Battery Replacement
1. Twist the end cap and remove from unit.
2. Remove old batteries and replace with three new
D size al aline batteries according to polarity
mar ings.
3. Twist the end cap bac on.
1. Slide the battery cover from the IR remote
controller.
2. Remove old batteries and replace with two new
AAA size al aline batteries according to polarity
mar ings.
3. Slide battery cover bac into place.
Product Speci ications
Manual Operation High > Medium > Low > Remote Control Operation > Off
(Press for 3 seconds for SOS-FLASHING)
(Press for longer than 3 seconds to turn OFF)
Remote Control Operation
(Within 8m distance)
High > Medium > Low > Off
(Blue LED indicator lights up to show remote control operation in stand-
by status. Press the IR remote controller's operation button to cycle
through various brightness levels)
(Press for 3 seconds for SOS-FLASHING)
(Press for longer than 3 seconds to turn OFF)
Manual IR remote control LED On > SOS-Flashing > Off
(Press OFF it stays in any mode over 3 seconds)
Battery Type Lantern: 3 x 1.5V D size al aline batteries (Not included)
IR Remote Controller: 2 x 1.5V AAA size al aline batteries (included)
Bulb Type Lantern: 3 x 1W Nichia White LEDs
IR Remote Controller: 1 x 5mm Nichia White LED
Accessories IR Remote controller
Hanging hoo (Not for climbing)
Size 95mm x 95mm x 185mm
Weight Lantern: 432g
IR Remote Controller: 48g (with batteries)
Removable cap
Rubberized housing
Green ON/OFF indicator
Brightness indicator
High mode
Medium mode
Low mode
As downlight Recessed hoo
2 lighting modes
IR remote control
Open
IR Remote Controller
Operation Button
5mm Nichia LED
ON/OFF Button
2 x AAA
Al aline
Batteries
Open
Green LED
Indicator
Amber LED
Brightness
Indicator
Open
3 x D
Al aline
Batteries
Operation
Button
LED bulb never
needs replacing!