Koolr red rack CORNER BASE AND TRIM User manual

CORNER BASE AND TRIM
ASSEMBLY & INSTALLATION GUIDE

TOOLS AND COMPONENTS
TRIM 4 pcs.Nails x 8
BASE
ATTACHING RACK TO BASE
To avoid cracking of wood, pre-drill 1/16” holes for screws.
Screw through bottom horizontal bars into BASE* with 7/8” screws or
nails ( gure A ). Shime base to level rack.
A
7/8” Screws x 8
Philips ScrewdriverHammer
Usable as Crown molding
ASSEMBLE RACK TO BASE

ASSEMBLE
NAIL IN TRIM
NOTE: The fo llowing instruc tions are for a corner base that will be
wrapped around a wall corner. The method of assembly is the same for
a corner base going into a corner, trim goes onto the opposite edge.
Nail through TRIM into BASE at groove to hide nails ( gure A ).
ADD TRIM TO BASE
A
RACK
WALL 1/2”
1/2”
13/16”
61/8”
9”
TRIM
MELAMINE
BASE

LIMITED WARRANTY
Koolr Products Inc. warrants this product to be free from defects due to workmanship
or material, under normal use and service, for a period of one (1) year after the date of
purchase. Please call our customer service department at 1-888-274-8813 or e-mail us
at [email protected]
Thiswarrantydoes notcovernormal cosmeticwear,cosmeticdefects, damage resulting
from improper assembly or maintenance, shipping damage, accident, or any misuse,
abuse or use contrary to the written instructions. This product is not warranted for com-
mercial use.
Thewarrantiesexpressed above constitute theentirewarrantyof Koolr Products Inc.with
regard to its products and are in lieu of and exclusive of all other warranties, express or
implied, including any of merchantability or tness for a particular purpose. In no event
shall Koolr Products Inc. be liable or responsible for incidental or consequential dam-
ages, including spoilage or breakage of wine. It is your own responsibility to insure your
wine, and to take all reasonable and necessary precautions to safeguard its condition.
© Koolr Products Inc. 2011
TEST BEFORE USE
Use of Red Rack is strictly at your own risk. Koolr Products Inc. will not
accept any responsibility or liability for damages resulting from units not
assembled precisely as directed, or not securely fastened to a wall or
support with suitable fasteners.
Before placing any bottles in your Red Rack, test it thoroughly to make
sure all fasteners are secure.