vi
3. Sequencer mode . . . . . . . . . .55
Sequencer P0: Play/REC................................55
Make settings for playing/recording a song, and select the
program etc. used for each track.
0–1:Prog.1–8
Programselection, mute,and solosettings
for each track
............................................55
0–2:Prog.9–16 ....................................................................55
0–3:Mixer 1–8
Pan and volume settings for each track
62
0–4:Mixer 9–16 ....................................................................62
0–5:PlyLoop 1–8
Loop track settings for each track
..........62
0–6:PlyLoop 9–16 ....................................................................62
0–7:Sampling
Settings for sampling and audio input etc.
....................................................................63
0–8:Preference
Select the realtime recording method, and
you can make metronome settings
........67
Sequencer P1: Cue List .................................68
Create and play a cue list for playing a succession of songs.
1–1:Cue List
Create and play back a cue list
...............68
Sequencer P2: Trk Param...............................72
Set various parameters for each timbre.
2–1:MIDI Ch 1–8
MIDI channel and status settings for each
track
...........................................................72
2–2:MIDI Ch 9–16 ....................................................................72
2–3:OSC 1–8
Mono/poly and portamento settings etc.
for each track
............................................72
2–4:OSC 9–16 ....................................................................72
2–5:Pitch 1–8
Pitch-related settings (transpose, pitch
bend range etc.) for each track
...............73
2–6:Pitch 9–16 ....................................................................73
2–7:Other 1–8
Delay and scale settings for each track
.73
2–8:Other 9–16 ....................................................................73
Sequencer P3: MIDI Filter ..............................74
Specify MIDI message reception filtering for each track.
3–1:MIDI 1 1–8
Program changes, aftertouch etc.
..........74
3–2:MIDI 1 9–16 ....................................................................74
3–3:MIDI 2 1–8
Joystick, ribbon controller
......................75
3–4:MIDI 2 9–16 ....................................................................75
3–5:MIDI 3 1–8
Realtime control knobs
...........................75
3–6:MIDI 3 9–16 ....................................................................75
3–7:MIDI 4 1–8
SW1/2, foot controller etc.
.....................76
3–8:MIDI 4 9–16 ....................................................................76
Sequencer P4: Zone/Ctrl................................ 76
Specify the note range and controllers for each track.
4–1:Key Z 1–8
Specify the range of keys sounded by each
track
...........................................................76
4–2:Key Z 9–16 ....................................................................76
4–3:Vel Z 1–8
Specify the range of velocities sounded by
each track
..................................................77
4–4:Vel Z 9–16 ....................................................................77
4–5:MOSS 1–8
Displayed if the EXB-MOSS option is
installed; set EXB-MOSS parameters
.....77
4–6:MOSS 9–16 ....................................................................77
4–7:Controller
Specify the function of the [SW1] and
[SW2] keys, and B-mode functions of the
REALTIME CONTROLS [1]–[4] knobs
.77
Sequencer P5: Track Edit...............................78
Perform track editing and step recording, and adjust the
tone of the program for each track.
5–1:Track Edit
Track editing operations such as Copy or
Delete, and step recording
......................78
5–2:Track Name
Edit the name of each track
....................86
Tone Adjust Parameters:
Adjust the tone
......................................86
5–3:Tone1.2 1–8 ....................................................................86
5–4:Tone1.2 9–16 ....................................................................86
5–5:Tone3.4 1–8 ....................................................................86
5–6:Tone3.4 9–16 ....................................................................86
5–7:Tone5.6 1–8 ....................................................................86
5–8:Tone5.6 9–16 ....................................................................86
Sequencer P6: Pattern/RPPR .......................... 88
Record and edit patterns, and make RPPR settings.
6–1:Pattern Edit
Record a pattern, and perform pattern
editing such as Copy or Delete
..............88
6–2:Pattern Name
Edit the name of a pattern
.......................90
6–3: RPPR Setup
RPPR settings
............................................91
Sequencer P7: Arpeggiator............................. 93
Make settings for arpeggiators A and B.
7–1:Setup 1–8
Assign an arpeggiator to each track
......93
7–2:Setup 9–16 ....................................................................93
7–3:Arpegg.A
Select an arpeggio pattern and make
settings for arpeggiator A
.......................94
7–4:Arpegg.B
Select an arpeggio pattern and make
settings for arpeggiator B
........................94
7–5:Scan Zone
Specify the range of notes and velocities
that will operate the arpeggiator
...........94
Sequencer P8: Insert Effect ............................95
Specify the bus for the output of each track, and make
insert effect settings.
8–1:Routing 1–8
Specify the bus and master effect send
levels for the output of each track
.........95
8–2:Routing 9–16 ....................................................................95
8–3: Insert FX
Select insert effects and turn them on/off,
and make chain settings
..........................97
8–4: IFX 1
Parameter settings for IFX1
....................97
8–5:IFX 2
Parameter settings for IFX2
....................97
8–6:IFX 3
Parameter settings for IFX3
....................97
8–7:IFX 4
Parameter settings for IFX4
....................97
8–8:IFX 5
Parameter settings for IFX5
....................97
