Koso BA033050 User manual

1-1 Accessories
wh033ba26c
The screw hole concaves are the fixing place for the
bolted cover(Accessory 8).
2-2
Installation Instructions
1.LCD meter(Accessory 1)
2.M3 X L20 screw(Accessory 5-A)
3.M3 X P0.5 nut(Accessory 5-B)
4.Meter cover(Accessory 2)
Followthe stepsbelow during
installation.
Followthe stepsbelow during installation.
4.
2.
1.
3.
A
A
1.Infrared temp sensor(Accessory 7)
2.Bolted cover(Accessory 8)
3.M2x5LxP0.4 screw(Accessory 9-A)
A
1.Infrared temp sensor (Accessory 7)
2.M3X5XP0.5 screw(Accessory 9-B)
B
2.
4.
1.
1.
2. 1.
3.
3.
B
2-3
AB
1.LCD meter(Accessory 1)
2.Meter cover(Accessory 2)
3.Velcro-male(Accessory 6)
4.Velcro-female(Accessory 6)
B
(May install in the
front and the back.) (May install in the right and the left.)
2.
NOTE
Choose either Method A or B
according to your need.
NOTE
Choose either Method A or B according to your need.
Infrared Temp Sensor
Installation Instructions
2-1
Wiring Installation Instructions
Red / "+"Wire connect key on
DC 12V main power switch
LCD meter(Accessory 1)
Power wire(Accessory 4)
Temp sensor wire(Accessory 3) Infrared temp sensor(Accessory 7)
Black / Ground wire connect to the vehicle body or
the engine. (it must be a good ground)
Mid-way connector
IR / Temp
LCD meter X1
1Meter cover X1 2
IR / Temp
Velcro X1 set
6
Infrared temp sensor X1
7
5
M3 X L20 screw X2(A)
M3 X P0.5 nut X2(B)
(A) (B)
Power wire X1
4
Temp sensor wire X1
3
Bolted cover X1
8
1.3 mm Allen key X 1
109
(A) (B)
M2x5LxP0.4 screw X6(A)
M3X5XP0.5 screw X2(B)
Attention!
● For installation, please follow the steps described. Any damage caused by wrong installation shall be imputed to the users.
● To avoid a short circuit from occuring do not pull or modify the wires during installation.
● Do not disassemble or change any parts. Opening and dissassembling this unit will void any warranty.
● Maintenance and repairs should be executed by our professionals only.
◎ Symbol description:
NOTE
WARNING!
Some procedures must be followed to avoid damages to the instrument.
Certain procedure must be followed to avoid damages to yourself, to the vehicle or others.
LIGHT ONFLASH
HOLD THE
BUTTON 3
SECONDS
HOLD THE
BUTTON ONE
SECONDS
Thank you for purchasing our product. This product is a multifunction meter and is easy to install. Before using, please read the instructions
carefully and retain them for future reference.
●

If no operation is made within 5 seconds,
the setting will be automatically
recorded and the screen will return to
the temperature display screen.
IR / Temp
IR / Temp
IR / Temp
IR / Temp
IR / Temp
34.4
17.2
69.8
JIS D 0203
W69.8 X L34.4 X H17.2 mm
●Water-Proof Standard
●Effective voltage
●Meter weight
●Meter size
●Effective temperature range
Display range : -4.0 ~ 302.0 ℉, Display unti : 0.1 ℉
●Temperature
Display range : 8.0 v~18.0 v , Display unti : 0.1 v
●Volt meter
-10~60 ℃
DC 12V
●Temperature warning Setting range : 140 ~ 302 ℉, Setting unit : 1 ℉
About 47.5 g
wh033ba26c
Functions, Settings Description
3
4-1
Display Switching Instruction
● In the voltage screen, press the button once
to enter the Max. temperature record screen.
●When the voltage ≦ 11.5 V, the value will blink.
●In the temperature display screen, press
the button once to enter the voltage
screen .
●When not connected to the Temp sensor,
the screen will show---.-℉。
●When the temperature > temperature
warning value, the value will blink.
● In the Max. temperature record screen, press the
button once to
go back to the temperature
display screen.
●
Press and hold the button for 3 seconds
to reset the Max. temperature record and
return temperature display screen.
●Back to temperature display screen .
●When the voltage ≧1５.5 V, the value will blink.
Design and specifications are subject to change without notice!
NOTE
IR / Temp
IR / Temp
IR / Temp
IR / Temp
IR / Temp
IR / Temp
● In temperature displayscreen, press and
hold the button for 6 seconds to enter
the temperature warning settings screen.
●Example：To set the temperature warning
settings to 185 ˚C.
●
Press and hold the button for 3 seconds
to move to the digit you want to set.
● In the temperature display screen, press and hold the button for 3 seconds to switch brightness.
4-2
Brightness Switching Instruction
4-3
Temperature Warning Settings
●Press the button once to choose the setting
number.
●EX：Set temperature warning value from
194 ℉ to 185 ℉.
●
Press and hold the button for 3 seconds
to go back to the temperature display screen.
●Back to temperature displayscreen.
NOTE
Setting range : Full brightness, half brightness.3
Default value : Full brightness
NOTE
NOTE
Setting range : 140 ~ 302 ℉
Default value : 194 ℉

The following situation does not necessary indicate malfunction of the device. Please check the following points, before taking it in for maintenance.
Sensor description
5
Meter does not display or display
error.
Temperature does not display or
display error.
●May be poor connection of the harness.
→Make sure the wires are
connected correctly.
Trouble Check item Trouble Check item
●Maybe poor connection of the sensor.
→Make sure the sensor is
connected correctly.
5-1
Trouble Shooting
3.
2.
1.
The sensor has a 10° wide operation angle.
(creating a cone area)
The reading area
* To get a larger reading area,
move the sensor away from the
area
** To get a smaller reading area,
move the sensor closer to the area
The distance from the
sensor to the surface
influences the reading area
wh033ba26c