KQQ T36S User manual

KQQ MIRROR DASH CAM
Model: T36S
Detachable Split Dash Camera
User Manual

CONTENT
1. Appearance --------------------------------------------------------1
2. Introduction -------------------------------------------------------2
3. Precautions --------------------------------------------------------2
4. Warnings ------------------------------------------------------------4
5. Installation and Operating ------------------------------------5
6. Introduction of Functions ------------------------------------9
7. Product Specifications ---------------------------------------17
8. Common Issues and Trouble Shooting -----------------17
9. About the User Manual ---------------------------------------20
10. Warranty ---------------------------------------------------------21
11. Thanks -----------------------------------------------------------22
12. Customer Service ---------------------------------------------22

- 1 -
1.Appearance
T36S Mirror Dual Dash Cam

- 2 -
2. Introduction
Thank you for purchasing KQQ T36S Mirror Dash Cam. This Dash Cam is a very elegant,
convenient, and durable multi-vehicle driving recorder.
This product provides high-quality image capture and irrefutable evidence for what goes on
from the perspective of your dashboard.
Compared with most dash cameras, this exclusive product design provides an elegant
appearance, is packed with top-rated unique features, records superb unbeatable videos.
It is very easy to use and support multi-functions:
Detachable front camera and split screen display
Front and rear dual recording
Video flip and mirroring
G-Sensor emergency recording
Manual camera function
Loop recording
Audio recording
Screensaver mode
Reversing system
Parking monitoring (need the original hard wire kit of T36S）
And more...
If you want to know more details about the accessories, please visit the KQQ store.
3. Precautions
1) Once receiving the package:
Please make sure the camera surface sticker and the recorder screen sticker are all
torn off, otherwise, the sticker will affects image clarity.
2) Contact us:
If you have any questions, or want accessories replacement, please Scan the QR Code to
CONTACT US:
Email：
[e-mail]
3) Use the original accessories
Please use original accessories provided in the package from KQQ store, just in case of
compatible issues after using others', especially using 2 or 3 in 1 cigar sockets of others will
lead to the insufficient current supply.
4) Check the functionality firstly
Please check the functionality of dash cam with its all accessories before installation. If you
want to find a professional for installation, please check the function first, so as to prevent
the inconvenience and installation cost loss caused by the machine problem after the
installation.

- 3 -
5) TF memory card installation
Please insert the external TF card from KQQ store before using it. The TF memory card is
used to store the image or video files of the driving recorder.
*Important:
(1) Please use a high-speed TF memory card (above Class 10) with a capacity of not
less than 8GB (supports max to 128GB). When the card is full,the machine will
automatically overwrite the earlier files. It is recommended to format or replace
the TF memory card regularly every month to ensure that the machine works
normally.
(2) Please don't splice rear camera wire for extension from other store, the monitor
may lose the rear image. The length of original cable for rear camera is 23 feet
(7m), suitable for most types of cars. We also have 33 feet(10m) rear camera
extension cables ( ASIN : B0B3DNT2MX) sold separately.
Product list
12” Rear view Mirror Dash Cam *1
Front Camera with 3.2 ft Cable *1
64GB Micro SD Card *1
Rear Camera with 23 ft Cable *1
Car Charger with 11.5ft Cable *1
Fixed Button for Cable *5
Screws and Tape *2
Cable Pusher *1
Rubber Straps for Installation *4
User Manual *1

- 4 -
4. Warnings
Failure to comply with safety warnings and regulations can result in serious injury or
death.
Please read and understand all instructions before using this product. If any damage
is caused by failure to follow the instructions, the warranty will be voided.
4.1 For Safety:
1) Keep all small accessories out of the reach of children.
2) Be sure to use accessories and designated parts. Using non-designated parts may
damage the equipment or cause fire, electric shock, or malfunction.
3) Want accessories replacement, please feel welcome to CONTACT US via Email：
[e-mail]
4) Do not try to open the cover or try to repair it yourself. If the accessories for this device
have any problem or this product is damaged or malfunctions, stop using it immediately
and consult your dealer. Continued use may cause fire, electric shock or vehicle failure.
Make sure CONTACT US first for any assistance. We have a responsive technical
service team for your asking.
5) Do not drop, puncture or disassemble or modify this product yourself. That may cause
an electric shock, malfunction, or fire.
6) Do not install or operate the camera, or attempt to change any setting while driving. If it
interferes with driving, please do not do any of these because this may cause an
accident. Make sure to Pull off the main road first and only do so when it is safe.
7) This camera is intended to use inside a motor vehicle. Don’t install it where it will block
the driver’s view of the road including on top of the dashboard or the deployment of
airbags.
4.2 For Maintenance:
1) Do not leave the camera in the direct sunlight for a long period of time or where the
temperature could go above 158°F (70°C).
2) Do not expose this product to rain, moisture, or water under any circumstances or it will
result in damage.
3) Do not expose this device to excessive dust, or use any chemical substance or
cleaning solvent to clean this device. Instead, use a soft moist cloth for cleaning to
avoid scratches that may compromise video quality.
4) Removing the camera from the vehicle when not in use is recommended. This
prevents the likelihood of theft or exposure to excessive heat to prevent damage to the
unit.
4.3 Others
1) This product is compatible with DC12V/24V vehicles.
2) Since this product uses a wide-angle lens, part of the image may be distorted. It also
differs from the actual perspective. This is a characteristic of wide-angle lenses and is
not a malfunction.

- 5 -
3) The specifications and appearance of this product are subject to change without notice
for improvement.
4) Some countries or USA states prohibit drivers from mounting anything on the
windshield or prohibit mounting on certain areas of the windshield.
5) It is the owner/operator’s responsibility to mount or use this device in compliance with
local laws. The company is NOT responsible for the loss of any data or your content
during operation or in any circumstance.
6) Any assistance needed？
Please Always feel welcome to CONTACT US by the QR Code.
Email：
[e-mail]
5. Installation and Operating
5.1 Notes on Installation
1) Before Installing: Power on the dash cam to check whether all functions and its
display can work normally.
2) When Installing: Please do not turn on the mirror screen until all the cameras are
plugged in, then the cameras can start up with a stable power/voltage perfectly, which
is a must-have installation process for this mirror camera.
If there is any expected issue with the dash cam whether the product is on or off, you
can try the tips below to reboot the dash cam and system
Tips 1 for rebooting the dash cam: Remove the memory card firstly→ Press the RESET
button (as below) with a paper clip or tip of the pen → Reinsert the SD card

- 6 -
Tips 2 for rebooting the system: Enter the menu → Select “ Factory format ” → Select “
Confirm ” (Note: The Tips 2 above will restore the initial parameter settings of the product,
after which you can reset the parameters again)
3) Don't pull too hard when routing cables of dash cam. Ensure all cables connected
correctly and all ports plugged in completely before powering.
4) After Installation: The functions and display of dash cam works normally before
installing, but it can't work after installing. So there may be a problem with installation.
Please check the connection of cables and ports again.
5) DON'T destroy or modify the original wiring without permission. If cables are damaged
during installation, cables MUST be replaced.
6) Scan the QR Code to CONTACT US
5.2 How to hide power cable inside your car’s dash board?
Many people on YouTube already demonstrated how and where to hide power cable inside
your car. You can view one of the possible ways on the link, this video is NOT recorded by
us. https://youtu.be/xwD8Ilk-MHU,
Or Scan the QR Code to watch
5.3 Dash Cam Rear view Mirror Installation:
1) Turn off dash cam. Insert TF card into TF card slot.
2) Note: Don’t remove TF card when dash cam is turned on. It will damage TF card and
its data
3) Mount T36S mirror dash cam over the original car rear view mirror with the provided
rubber straps. Then adjust the angle.

- 7 -
5.4 Detached Front Camera Installation:
(1) Choose installation positions of front on front windshield.
(Note: It is recommended to install the front camera behind the rear view mirror.)
(2) Clean and dry windshield before installation.
(3) Remove protective films of double-sided stickers and stick front camera to selected
positions separately.
(4) Arrange camera cable and plug into front camera port
Warning: Don't install front in locations that blocks driver's field of view. Don't let camera
cables obstruct the visual field of dash cam and driver.
5.5 Rear Camera Installation :
1) Check whether the rear camera can work well at first.
2) Choose the installation positions(Two options):
Position 1: Install the rear camera near the license plate.
Note: Position 1 is highly recommended. It support rear viewing and parking
assistant.
Installation steps for position 1:
1) Run rear camera cable along from top of windshield, door frame, A-pillar, B-pillar, car
boot and all the way to car license plate, and hide the cable behind car rubber seals.
2) Find a suitable installation position near license plate. Then fix rear camera with the
provided screws and rear camera holder to the selected position.
(Note: It is recommended to set rear camera angle pointing slightly down.)
3) Plug the rear camera port into AV-IN/AHD1 port on dash cam.
4) Connect the red cable on rear camera cable to the positive pole of the reversing
light.
5) (Note: If you don’t need reversing guild, you can choose not to connect the reversing
light.)