Owner s manualOwner s manual
EN
EN
26 27
4. To stop the track, press the play / pause button or the STOP button on the
remote control.
5.To change track, press the previous / next track button.
6.To rewind a track, press and hold the backward / forward button.
7. To change album, press the next / previous track button.
Programming playback
The device can play only selected tracks on the disc.
1. To program playback, press the STOP button on the remote control.
2.Then press the PROG button on the remote control - the device screen will
display the message 001 P-01.
3.Press the next / previous track button or use the numeric keypad to select
a track number. The screen will show the number of the selected track.
4.To move to the possibility of programming the next track, press the PROG
button.
5.Successive pieces should be programmed in the same way.
6.To start playback of the programmed tracks, press the play / pause button.
7. To disable the Programmed Playback function, press the STOP button.
SPECIFICATION
General information
Tube preamplifier
CD disc player
Radio: FM / DAB+
Bluetooth + NFC
Remote control
Playback from USB
Charging external devices
Technical data
DAB+ frequency range: 174,928 - 239,200 MHz
FM frequency range: 87,5 - 108 MHz
Profiles Bluetooth: A2DP
Range: up to 8 meters
Max. Bluetooth transmission power: 4 dBm
NFC working frequency: 13,56 MHz
Woofer: 4,3” (110 mm)
Tweeter: 1,5” (38 mm)
Output power (RMS): 2 x 30 W
Impedance: 6 Ohm
THD: <1% (1 KHz, 1 W)
Inputs / outputs:
Headphone output Jack 3,5 mm
2 x RCA speaker outputs
Audio input Jack 3,5 mm
AUX input
USB port (5 V 1 A)
Antenna socket
Power socket
Power consumption: 35 W
Power supply: AC 100 - 240 V~; 50 - 60 Hz
Dimen ion :
Main unit: 250 x 276 x 146 mm
Speaker: 160 x 202 x 244 mm
Engli h
Correct Di po al of Thi Product
(Wa te Electrical & Electronic Equipment)
It is forbidden to place equipment waste marked with the symbol of a crossed-
out trash bin together with other waste. This equipment is subject to collection
and recycling. The harmful substances it contains can cause environmental
pollution and pose a threat to human health.
Made in China for LECHPOL ELECTRONICS Sp. z o.o. Sp.k., ul. Garwolińska 1,
08-400 Miętne.
LEARN MORE
For more information on this device visit: www.krugermatz.com. Read owner's
manual carefully before using. Visit www.krugermatz.com website for more
products and accessories. In case of any doubts or questions reach out to our
Frequently Asked Questions section.
