The Lassen 8 series are high performance routing switchers for SDI (SMPTE 259) and HD
-
SDI (SMPTE 292) video signals. These units come in a compact 2U (3.5”
)
frame and can
be ordered with or without digital audio. They can route any or all inputs to any or all
outputs. HD
-
SDI models can input SDI and HD
-
SDI simultaneously, but there is no
conversion between formats.
LASSEN XL ANALOG (COMPOSITE) VIDEO FEATURES
-
High Bandwidth
-
300MHz (
-
3dB) fully loaded.
Very Low Crosstalk
-
80dB @ 1MHz,
-
47dB @100MHz.
Qwik Adjust Knob™ Rotary Control interface
-
This user intuitive knob along with the 80 character LCD display provides quick and convenient setup,
adjustment and signal switching.
Video Mute Capability
-
Genlock Input
-
Looping internal sync input for vertical interval switching.
Output Disconnect Feature
-
LASSEN SDI VIDEO FEATURES
-
Maximum Data Rates
-
360Mbits/sec.
Standards
-
SMPTE 310, SMPTE 259, DVB
-
ASI.
Jitter
-
< 0.2UI.
LASSEN HD VIDEO FEATURES
-
Backwards compatible with SDI Signals
-
Maximum Data Rates
-
1.485Gbits/sec.
Standards
-
SMPTE 310, SMPTE 259, SMPTE 292, DVB
-
ASI.
Jitter
-
< 0.2UI.
ANALOG AUDIO FEATURES.
-
Audio Type
-
Balanced or un
-
balanced on terminal blocks.
Input (Level) Adjustment Capability (
-
10dB to +15dB)
-
Each input via RS
-
232, front panel, and G.R.I.P software.
Output (Volume) Adjustment Capability (Mute,
-
59.5dB to +15dB)
-
Each input via RS
-
232, front panel, and G.R.I.P software.
No Zipper Effect
-
Lassen routing switchers employ zero crossover chip technology which eliminates the annoying “zipper sound effect”associated with
digital volume controls.
Audio Mute Capability.
-
Crosstalk
-
80dB @ 1kHz & 70dB @ 20kHz.
S/N (20
-
20kHz)
-
90dB.
DIGITAL AUDIO FEATURES
-
Standards
-
Balanced AES/EBU.
Jitter
-
+/
-
20ns.
OTHER FEATURES
-
Firmware Updates
-
Downloadable.
Control
-
Local front panel control with 80 character LCD readout.
RS
-
232/422 plus RS
-
485 for optional control panels.
IP (Ethernet) control.
G.R.I.P: Windows
®
-
based routing switcher setup/diagnostic software.
Redundant Power Supplies
-
Optional on 32x16 & 32x32 models.
Approvals
-
UL & CE.
Control Panels (Optional)
-
Programmable, Single Bus and XY.
