Kramer KT-107-INWL User manual

KT-107-INWL Quick Start (P/N: 2900-300836QS REV 1)
P/N:
2900- 300836QS
Rev:
1
Scan for full manual
KT-107-INWL Quick Start Guide
This guide helps you install and use your KT-107-INWL for the first time.
Go to www.kramerav.com/downloads/KT-107-INWL to download the latest manual and check for
updates.
Step 1: Check what’s in the box
KT-107-INWL In-Wall Lock
1 Quick start guide
Step 2: Get to know your KT-107-INWL
The KT-107-INWL In-Wall Lock secures KT-107,KT-107RB and KT-107S touch panels safely into a wall.
Step 3: Install the touch panel KT-107-INWL into a wall:
1. insert a screwdriver into the ledge
on the front top-right to open the
front frame of the In-Wall Lock.
2. Insert the KT-107-INWL into the
wall and fasten the mounting
screws (supplied).

Step 4: Mount the touch panel
1. Unscrew the 4 side-screws and
remove the in-wall frame.
2. Insert the cables through the
openings of the Touch-Panel
on-wall mount (for example, a USB
cable to connect to an external
device).
3. On the rear side of the Touch
Panel, unscrew the cover and set
the cover and screw aside.

4. Attach the panel mount plate onto
the rear side of the Touch Panel
using the 4 M2x4 screws (supplied
with the Touch Panel) and tighten.
5. Connect the flat cable between the on-wall mount and the Touch Panel.
6. Slide the Touch Panel panel mount
tabs over the grooves on the on-
wall mount unit.

7. Insert the Touch Panel, face down,
into the front frame of the
KT-107-INWL.
8. Place the in-wall frame over the
Touch Panel rear side and fix using
the 4 in-wall frame screws.
9. Close the front frame.