RK-19N Under-the-table Brackets
Congratulations on purchasing your Kramer metal RK-19N under-the-table brackets (one left
bracket and one right bracket) for installing 1U machines underneath a wooden table or podium
top. The RK-19N supports the following device types:
1U—for example, VP-732 or VP-773A
1/2-19" 1U (extrusion)—for example, PIP 4
1/3-19” 1U (extrusion)—for example, SL-10
1/4-19" 1U—for example, 907xl
The RK-19N is sturdy, cost-effective and easy to install.
The RK-19N consists of two
metal brackets which are
attached to the table via the six
rim screw holes.
Figure 1: RK-19N Under-the-table Brackets
Installing RK-19N
To install the RK-19N:
Attach the RK-19N brackets to the sides of the Kramer machine
Fix the RK-19N with the machine under the table
Attaching the Brackets
You can attach the RK-19N brackets to all types of Kramer 19” 1U Kramer machines, as follows:
