Kraus Pax KHU15 User manual

R
INSTALLATION MANUAL
KHU15 / KHU19 / KHU23 /
KHU24L / KHU29 / KHU32 / KHU322
Pax™ Zero-Radius Handmade
Stainless Steel Kitchen Sinks
www.kraususa.com I Toll Free: 1.800.775.0703 I © 2018 Kraus USA Inc. I REV. October 26, 2020

Congratulations on the purchase of your new Kraus plumbing fixture!
Please keep the box and packaging materials until your product is completely installed. If you have
any questions, require technical assistance or have any problems with your product:
2
Please contact our Customer Service Team
1-800-775-0703 / [email protected]
Have the model number available and retain a copy of your receipt with purchase date for
reference.
If for any reason this product does not meet your expectations, please be sure to repack this
product in the original box and packaging material to avoid damage during transit.
DO NOT RETURN TO STORE
STOP

3
For technical assistance or replacement parts, please contact Kraus Customer Service
and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
The step-by-step guidelines in the installation instructions are a general reference for installing a Kraus sink. Should
there be any discrepancies, Kraus cannot be held liable. It is recommended to install all Kraus products by hiring a
licensed professional.
Prior to Installation:
·Make sure that you have all necessary parts by checking the parts list. If any part is
missing or damaged, please contact Kraus Customer Service at 800-775-0703 for a
replacement
·Inspect the sink prior to installation to make sure that it has not been damaged or during
shipping
·Use the cut-out template provided by Kraus
·Observe all plumbing and building codes according to your state requirements
·Not recommended to be installed with laminate countertop
Tools you will need:
NOTE: Specialized tools may be necessary to install Kraus Stainless Steel Kitchen sinks with
countertop materials other than wood, marble or granite.
Safety Goggles Silicone Adhesive Jig Saw
Phillips Screwdriver Tape Measure Pencil
Drill Scissors
Screwdriver Putty Knife

44
Parts List
KHU15
·Cut-Out Template
·Mounting Hardware
·Strainer ST-3
·Towel
KHU19
·Cut-Out Template
·Mounting Hardware
·Strainer ST-3
·Towel
KHU23
·Cut-Out Template
·Mounting Hardware
·Bottom Grid KBG-H23
·Strainer ST-3
·Towel
KHU24L
·Cut-Out Template
·Mounting Hardware
·Strainer ST-3
·Towel
KHU29
·Cut-Out Template
·Mounting Hardware
·Bottom Grid KBG-H29
·Strainer ST-3
·Towel
KHU32
·Cut-Out Template
·Mounting Hardware
·Bottom Grid KBG-H32
·Strainer ST-3
·Towel
KHU322
·Cut-Out Template
·Mounting Hardware
·Bottom Grid KBG-H322 x 2
·Strainer ST-3 x 2
·Towel
All models compatible with
Garbage Disposal Adapter GDA-1
(Sold Separately)

55
Dimensions
Model #: KHU23
Sink Dimensions: 22 1/2” x 18 1/2” x 10”
Min Cabinet Size: 27”
Model #: KHU24L
Sink Dimensions: 24” x 18 1/2” x 12”
Min Cabinet Size: 27”
Model #: KHU15
Sink Dimensions: 14 1/2” x 18 1/2” x 10”
Min Cabinet Size: 18”
Model #: KHU19
Sink Dimensions: 18 1/2” x 18 1/2” x 10”
Min Cabinet Size: 24”
17" (432mm)
18 1/2" (470mm)
13" (330.3mm)
14 1/2" (368.3mm)
3/4"
(19mm)
3/4"
(19mm)
10"
(254mm)
95°
2 5/8"
(66mm)
4 1/2"
(115mm)
4 1/2"
(115mm)
11 3/8" (287.86mm)
10 1/8"
(258mm)
15 1/4" (387.7mm)
2 5/8"
(66mm)
4 1/2"
(115mm)
4 1/2"
(115mm)
17" (432mm)
18 1/2" (470mm)
3/4"
(19mm)
17" (432mm)
18 1/2" (470mm)
3/4"
(19mm)
10"
(254mm)
10 1/8"
(258mm)
15 1/4" (387.7mm)
15 3/8" (389.56mm)
21" (533.5mm)
22 1/2" (571.5mm)
3/4"
(19mm)
10"
(254mm)
95°
10 1/8"
(258mm)
4 1/2"
(115mm)
4 1/2"
(115mm)
2 5/8"
(66mm)
17" (432mm)
18 1/2" (470mm)
3/4"
(19mm)
95°
19 3/8" (491.06mm)
15 1/4" (387.7mm)
17" (432mm)
18 1/2" (470mm)
22 1/2" (571.6mm)
24" (609.6mm)
12"
(304.8mm)
3/4"
(19mm)
3/4"
(19mm)
2 5/8"
(66mm)
4 1/2"
(115mm)
4 1/2"
(115mm)
95°
20 1/2" (520.3mm)
12 1/4"
(309.8mm)
15 1/4" (387.7mm)
R 0"
(0mm)
R 0"
(0mm)
R 0"
(0mm)
R 0"
(0mm)

66
Dimensions
Model #: KHU322
Sink Dimensions: 31 1/2” x 18 1/2” x 10”
Min Cabinet Size: 36”
Model #: KHU29
Sink Dimensions: 28 1/2” x 18 1/2” x 10”
Min Cabinet Size: 33”
Model #: KHU32
Sink Dimensions: 31 1/2” x 18 1/2” x 10”
Min Cabinet Size: 36”
4 1/2"
(115mm)
4 1/2"
(115mm)
17" (432mm)
18 1/2" (470mm)
27" (686mm)
28 1/2" (724mm)
3/4"
(19mm)
3/4"
(19mm)
10"
(254mm)
95° 95°
25 3/8" (643.56mm)
10 1/8"
(258mm)
15 1/4" (387.7mm)
2 5/8"
(66mm)
4 1/2"
(115mm)
4 1/2"
(115mm)
17" (432mm)
18 1/2" (470mm)
30" (762mm)
31 1/2" (800mm) 3/4"
(19mm)
3/4"
(19mm)
10"
(254mm)
95° 95°
28 3/8" (719.56mm)
10 1/8"
(258mm)
15 1/4" (387.7mm)
2 5/8"
(66mm)
4 1/2"
(115mm)
4 1/2"
(115mm)
17" (432mm)
18 1/2" (470mm)
14 1/2" (368.3mm)
31 1/2" (800mm)
3/4"
(19mm)
3/4"
(19mm)
10"
(254mm)
95° 95°
10 1/8"
(258mm)
14 1/2" (368.3mm)
1" (25.4mm)
12 7/8"
(325.86mm)
12 7/8"
(325.86mm)
R 0"
(0mm)
15 1/4" (387.7mm)
R 0"
(0mm)
R 0"
(0mm)
2 5/8"
(66mm)

7
Step 1. Determine Reveal Type
·Use scissors to cut along the line of the paper template for your desired reveal type
(Negative, Positive, or Flushed Reveal)
KRAUS Recommended Installation Type
3/8“ Positive Reveal
Flushed/Zero Reveal
1/8“ Negative Reveal
3/8” POSITIVE
1/8” NEGATIVE
FLUSHED/ZERO
Centerline

8
Step 2. Position Template
·Check the cut-out template against the actual sink to ensure a proper sized cut-out.
·Place the cut-out template in the desired location on the countertop.
NOTE: Make sure clearance is suitable for backsplash, faucet and plumbing for the sink.
Paper Template

9
Step 3. Trace Template
·Trace template on countertop with a pencil.
Paper Template

10
Step 4. Cut Countertop
·Cut the opening in the countertop by carefully following the traced line.
NOTE: Please use the appropriate saw that best fits your countertop material.