Kraus KPF-2160 User manual

INSTALLATION MANUAL
Single Handle Kitchen Faucet
KPF-2160
www.kraususa.com I toll free: 1.800.775.0703 I © 2014-2015 Kraus USA Inc. I REV. August 16, 2016

1
Thank you for your purchase
We would like to take this opportunity to thank you for choosing Kraus.
We hope that you are completely satised with your purchase, and enjoy it for years
to come. If you have any questions, or require technical assistance, please contact
us at 800.775.0703 and one of our representatives will be happy to help.
For more information about Kraus products, please visit:
www.kraususa.com
In order to activate your warranty and get faster access to customer support, please
register your new Kraus product at:
www.kraususa.com/registration
Sincerely,
Kraus USA Customer Service

2
Prior to Installation:
• Make sure you have all necessary parts by checking the diagram and parts
list. If any part is missing or damaged, please contact Kraus Customer
Service at 800-775-0703 for a replacement
• Turn o the hot and cold water supply at the angle stops and turn on the
old faucet to release any built up pressure. Remove existing faucet. Clean
sink or countertop to remove any debris, plumber’s putty, or silicone
• Place bucket under angle stops. Turn on to ush any debris prior to
installing new plumbing. Shut o angle stops
• Pre-drilled hole size requirement: 1-3/8”(min) – 1-1/2” (max)
• Max countertop thickness without deck plate: 1-3/8”
Tools Required
For technical assistance or replacement parts, please contact Kraus
Customer Service and one of our representatives will be happy to help:
Toll-Free: 800-775-0703 or [email protected]
*Safety Goggles
*Spanner
(Included)
*Flathead Screwdriver *Bucket *Adjustable Wrench
6 5/8”
5 4/5”
3/8”
(10mm)
7/8”
19.7
º
(22mm)
8 5/16”
1 1/4-18UNF-2A
(21mm)
10 1/8”
(257mm)
1 3/8”
(35mm)
3 3/4”
(168mm)
(147.3mm)
(96mm)
∅ 1 3/4”
(
∅ 45mm)
∅ 1 15/16”
(
∅ 50mm)
9/16”-18UNEF
27mm ~ 41.3mm 1 1/16” ~ 1 5/8”
∅ 1 15/16”
(
∅ 50mm)
12 7/16”
(316mm)
1 5/8”
(42.5 mm Max)
7A
8B
8C
8D
8A
7A
8B
8C
8D
8A

3
Diagram and Parts List
Before YourInstallation
Tools You Will Need
A
F
H
E
D
C
B
I
J
G
A. Aerator Assembly
A1 Aerator Cover
A2 Aerator
A3 Washer
B. Faucet Body
C. Base O-Ring
D. Rubber U-Washer
E. Metal U –Washer
F. Mounting Screws
G. Mounting Nuts
H. Spacer (Optional) For
Topmount Stainless Steel Sinks
I. Hot & Cold Waterlines
J. Spanner

4
45˚
25˚
45˚
(2-1/4”)
Ø 53.5mm
(1-5/8”)
Ø 42mm
(7-5/8”)
195mm
(9-1/2”)
240mm
(4-3/8”)
110mm
(14-1/8”)
360mm
(3/4”)
Ø19mm
Faucet Dimensions

5
Step 1: Remove mounting hardware
Attach mounting screws (F)
at base of faucet (B). Secure
with athead screwdriver.
Attach waterlines (I). Hand
tighten only
Step 2: Install faucet and mounting hardware
Insert faucet body (B) on
deck or sink with base o-ring
(C) attached
B
B
F
I