KREZ BALANCE User manual

User’s Guide
Model: KREZ BALANCE

1. Product Overview
Turn on device: Long press device touch screen area 4 seconds
(1) Touch area to switch menu
(2) Display
(3) Smart bracelet case
(4) Smart bracelet strap
(5) Smart bracelet clasp
2. Function display
Blood pressure
monitor
Heart rate monitor
(Real-time
measuring your
heart rate)
Steps
(Display the current
number of steps)
Distance
Calorie
Time and date
Smart wake up
(Long press touch
area to switch on/
off this function)
Bluetooth
connection status
and name
3. Charging

Remark: Make sure the pins on charging cable fit correctly onto the charging terminals on the
back of smart bracelet.
4. Blood pressure
Normal blood pressure range will be with the emotional, environmental and meal
fluctuations, regulation is necessary. When tension or exercise, blood pressure should be
increased.
The general range of normal blood pressure: systolic blood pressure 140-90mmHg,
diastolic blood pressure 90-60mmHg.
5. Real-time heart rate monitor
Long press touch area 2 seconds in this interface, to turn on/ off
real-time heart rate monitor
This interface means real-time heart rate monitor turning on
Please await about 15seconds to get your heart rate data
Real-time heart rate data display
6. Pairing
Search “Hplus Watch” on App store, download and install into your smart phone.
Open the App, it will show below:
Charging Pogo-pin
Heart rate sensor
Charging terminals
Systolic blood pressure
Diastolic blood pressure
1. In heart rate monitor user interface, long press touch area
2seconds to turn on this function, await about 15seconds,
Heart rate icon flashes means that heart rate monitoring
started.
2. Long press touch area 2seconds to stop heart rate monitor

7. Time/Date
After you connected the Bluetooth , the time and date of the watch will be synchronized . And
please turn on the APP and make sure the Sync is On . Below please check the photo .
8. Real Time Heart Rate and All day Heart rate
Real Time hear rate : Long press and turn on the heart rate . The back case heart rate sensor will
show the green light .
Remark : When you turn on the real time heart rate , it wastes more battery power . So we
suggest to turn it off once you finish the test . Long press to turn it off .
Status of turn on heart rate Status of turn off heart rate
All day heart rate : Go to APP , go to Setting , and turn on the All Day HR like below photos .
Your watch back housing heart rate sensor will show the green light . And it tests your heart rate
every 10 mins
Remark : When you turn on the all day heart rate , it wastes more battery power .
Click App Settings ->Bluetooth ->
Select your smart bracelet name to
pair smart watch with App.

APP Photo :
Watch Photo :
Turn on All Day HR Turn off All Day HR
9. Specification
Size : 230*20mm
Weight : 20g
Water Resistance Level : 3ATM (Only life water resistance , don’t wear it to go to swim !)
Battery : Li-Poli Battery
Battery Size: 150mAh
Charge : 5V
Compatibility : Android 4.3 or above , IOS 7.0 or above
10. APP Instalation ：
Remark : you can downlaod <Hplus Watch> from Google Play
You can download <Hplus Watch > from Apple Store
11. Q&A
1 ,Factory reset
Please make the bracelet like the below photo . Long press it until the words <Hplus> appears .
Then the bracelet is already factory reset .
Remark : when you long press the device , you will see <goodbye – welcome , goodbye-Hplus>
Please keep long pressing . Until you see <Hplus >

2, All day heart rate turn on and turn off method :
All day heart rate turn on method : Make sure the bracelet and APP <Hplus> Bluetooth connected
ok . Then go to APP , go to Setting , and turn on the All Day HR .
Your watch back housing heart rate sensor will show the green light . And it tests your heart rate
every 10 mins
If you want to turn it off . Both the bracelet and APP <Hplus> Bluetooth also need to be
connected well . Then you turn off the All Day HR .
3, Bracelet bluetooth unbind and Forget
If you use the same cell phone to connect with different bracelet .
Or if you use the same bracelet to connect with different cell phone . Below is what we have to
do :
Go the APP <Hplus> , go to setting , and unbind the previous cell phone .
Then go to Cell phone , go to setting , and go to Bluetooth , press forget the previous bracelet .