Krivo Pick-ups Micro-Manouche Instruction manual
Micro-Manóuche
Universal Pickup for all Jazz
Guitars Owner’s Manual
Thank you for buying a Krivo Micro-Manóuche
pickup for guitar
To install your new pickup simply follow these steps:
1. Take two small lentil sized pieces of the included putty,
and apply to each side of the pickup as shown. Flatten the
putty as much as you can to avoid adding any unnecessary
height to the pickup. It only takes a tiny amount of putty to
securely adhere the pickup to the guitar.
Note: For archtop jazz guitars it is usually better to place a
slightly larger amount of putty in the center of the pickup.
2. Place your pickup on the guitar such that the Krivo logo
is centered in relationship to the fretboard. Then, gently
but firmly, press the pickup down onto the guitar using a
slight rocking motion until it is securely affixed.
3. Simply plug the attached 1/4” cable in to your amplifier
and you are ready to play. Placing the pickup close to the
fretboard results in a warmer sound, while a placement
closer to the bridge results in a brighter sound. Experiment
to see which placement you prefer.
If you have any questions regarding your new pickup please email me at:
Table of contents
