
Daily Cleaning Instructions
Weekly Cleaning Instructions
1. Turn off the product ow to the faucet.
2. Relieve pressure at the top of the faucet by
pressing the button on top (A).
3. Twist the metal top off and clean (B).
4. Unscrew the clear tube to clean (C). (Before doing
so, it may be benecial to place a cup underneath
to catch any remaining liquids or solids that have
been left inside.)
5. When reassembling, everything can be tightened
by hand.
1. Turn off the product ow to the faucet.
2. Relieve pressure at the top of the faucet by
pressing the button on top (A).
3. Twist the metal top off and clean (B).
4. Unscrew the clear tube to clean (C). (Before doing
so, it may be benecial to place a cup underneath
to catch any remaining liquids or solids that have
been left inside.)
5. Unscrew the nut at the bottom (D).
6. Clean the spout (E) and the rubber washer (F)
inside.
7. Use a pipe cleaner to clean up inside the faucet
and into the metal tube (G). Make sure the black
valve handle (H) is in the open position to allow
the pipe cleaner through.
8. When reassembling, everything can be tightened
by hand.
KR-SNS Installation Manual
Krowne • 100 Haul Rd. Wayne, NJ 07470 krowne.com
Note: This faucet needs to be cleaned daily to prevent build-up of bacteria.
WARNING: This product can expose you to chemicals including lead and lead compounds, which are known to the State of
California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov
A
B
C
G
D
E
F
H
Installation Instructions
1. Remove the faucet from the box.
2. Screw the male threaded end into the female
threaded nut on the tower.
3. Using a beer faucet wrench, tighten the faucet into
place while ensuring it is straight.
4. Screw top off and insert garnish of your choice.
Screw top back on.
5. Your faucet is now ready to dispense beverages.