
KRS Roof Racks VW Amarok Page 2 of 3
Installation Guide
Ed. 1, 01-09-2017
1 . 2 .
^Remove plastic cover plate by rotating cap
and levering upwards.
3 .
M6x20 Button Screw,
Spring Washer, Washer
Vehicle Thread
QTY
4
^Insert the plastic caps over the fixing holes
4 .
^Remove bolt.
5 . 6 .
M6x35 Hex Head Screw,
Spring Washer, Washer
Captive Thread Plate
QTY
4
M8x30 Cap Screw, Spring
Washer, WasherCaptive
Thread
QTY
4
^Place bracket in position and fasten down
using the fixings provided.
^Repeat steps for other side to fit bracket.
^Loosely mount roof rack feet to bar.
^Place the roof rack onto the vehicle and
slide feet to line up with brackets.
^Remove the rack and tighten the fixings
7 .
^Insert the rubber strip on top of the bar
and cut to length.
^Cut to size and insert plastic strips under
bar.
^Bolt the rack onto the vehicle using the
specified fixings.
^Fit end caps using the fixings provided.
Note: Ensure endcap fits on the correct
way up - with plastic tab flush against
aluminium.
8 .
^Repeat steps to fit rear roof rack.
9 .