Contents
4 of 76 Hyamat K
6 Commissioning/Start-up/Shutdown................................................................................................... 26
6.1 Commissioning/Start-up.................................................................................................................................26
6.1.1 Prerequisites for commissioning/start-up .........................................................................................26
6.1.2 Priming and venting the pressure booster system...........................................................................26
6.1.3 Setting the dry running protection device.......................................................................................27
6.1.4 Start-up...............................................................................................................................................28
6.1.5 Checklist for commissioning/start-up................................................................................................29
6.2 Operating limits..............................................................................................................................................30
6.2.1 Frequency of starts.............................................................................................................................30
6.2.2 Ambient conditions ...........................................................................................................................30
6.2.3 Maximum operating pressure...........................................................................................................30
6.2.4 Fluid handled .....................................................................................................................................30
6.2.5 Minimum flow rate............................................................................................................................31
6.3 Shutdown........................................................................................................................................................31
6.3.1 Shutdown ...........................................................................................................................................31
6.3.2 Measures to be taken for shutdown ................................................................................................31
7 Operation.............................................................................................................................................. 32
7.1 Control panel..................................................................................................................................................32
7.1.1 Display ................................................................................................................................................33
7.1.2 LEDs.....................................................................................................................................................33
7.1.3 Function keys......................................................................................................................................33
7.1.4 Navigation keys..................................................................................................................................34
7.1.5 Service interface.................................................................................................................................34
7.2 Menu structure ...............................................................................................................................................35
7.3 Quick menu.....................................................................................................................................................36
7.4 Access levels ....................................................................................................................................................36
7.5 Displaying and changing parameters............................................................................................................37
7.6 Displaying and acknowledging warning and alert messages......................................................................38
7.7 Saving and restoring settings ........................................................................................................................39
7.8 Operating modes............................................................................................................................................40
7.8.1 Manual mode.....................................................................................................................................40
7.9 Functions.........................................................................................................................................................40
7.9.1 Setting flow detection.......................................................................................................................40
7.9.2 Remote ON/OFF..................................................................................................................................40
7.9.3 Fire alert .............................................................................................................................................40
7.9.4 Setting the ambient temperature monitoring device (optional) ...................................................41
7.9.5 Enabling digital inputs (optional).....................................................................................................41
8 Servicing/Maintenance........................................................................................................................ 42
8.1 General information/safety regulations........................................................................................................42
8.1.1 Inspection contract ............................................................................................................................42
8.2 Servicing/Inspection........................................................................................................................................43
8.2.1 Supervision of operation...................................................................................................................43
8.2.2 Maintenance schedule.......................................................................................................................43
8.3 Setting the pre-charge pressure ....................................................................................................................44
8.4 Resetting dry running protection..................................................................................................................45
9 Trouble-shooting.................................................................................................................................. 46
10 Related Documents.............................................................................................................................. 48
10.1 General assembly drawings with list of components...................................................................................48
10.1.1 HyamatK with Movitec 2, 4, 6, 10, 15..............................................................................................48
10.1.2 Hyamat K with Movitec 25, 40, 60, 90..............................................................................................50
10.2 Flow diagram..................................................................................................................................................52
10.3 Parameter list..................................................................................................................................................53
10.4 Fault messages................................................................................................................................................70
